Linux version 2.6.21-1.3116.fc7 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070424 (Red Hat 4.1.2-11)) #1 SMP Thu Apr 26 10:17:55 EDT 2007 Command line: ro root=LABEL=/ rhgb quiet selinux=0 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bd643000 (usable) BIOS-e820: 00000000bd643000 - 00000000bd6c6000 (ACPI NVS) BIOS-e820: 00000000bd6c6000 - 00000000be5fb000 (usable) BIOS-e820: 00000000be5fb000 - 00000000be608000 (reserved) BIOS-e820: 00000000be608000 - 00000000be6a5000 (usable) BIOS-e820: 00000000be6a5000 - 00000000be6aa000 (ACPI data) BIOS-e820: 00000000be6aa000 - 00000000be6ab000 (usable) BIOS-e820: 00000000be6ab000 - 00000000be6f2000 (ACPI NVS) BIOS-e820: 00000000be6f2000 - 00000000be6ff000 (ACPI data) BIOS-e820: 00000000be6ff000 - 00000000be700000 (usable) BIOS-e820: 00000000be700000 - 00000000bf000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 143) 0 entries of 3200 used Entering add_active_range(0, 256, 775747) 1 entries of 3200 used Entering add_active_range(0, 775878, 779771) 2 entries of 3200 used Entering add_active_range(0, 779784, 779941) 3 entries of 3200 used Entering add_active_range(0, 779946, 779947) 4 entries of 3200 used Entering add_active_range(0, 780031, 780032) 5 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT BE6FD038, 0050 (r1 INTEL DG965OT 68C 1000013) ACPI: FACP BE6FC000, 00F4 (r2 INTEL DG965OT 68C MSFT 1000013) ACPI: DSDT BE6F7000, 40E9 (r1 INTEL DG965OT 68C MSFT 1000013) ACPI: FACS BE6AB000, 0040 ACPI: APIC BE6F6000, 0078 (r1 INTEL DG965OT 68C MSFT 1000013) ACPI: WDDT BE6F5000, 0040 (r1 INTEL DG965OT 68C MSFT 1000013) ACPI: MCFG BE6F4000, 003C (r1 INTEL DG965OT 68C MSFT 1000013) ACPI: ASF! BE6F3000, 00A6 (r32 INTEL DG965OT 68C MSFT 1000013) ACPI: HPET BE6F2000, 0038 (r1 INTEL DG965OT 68C MSFT 1000013) ACPI: SSDT BE6A9000, 01BC (r1 INTEL CpuPm 68C MSFT 1000013) ACPI: SSDT BE6A8000, 0175 (r1 INTEL Cpu0Ist 68C MSFT 1000013) ACPI: SSDT BE6A7000, 0175 (r1 INTEL Cpu1Ist 68C MSFT 1000013) ACPI: SSDT BE6A6000, 0175 (r1 INTEL Cpu2Ist 68C MSFT 1000013) ACPI: SSDT BE6A5000, 0175 (r1 INTEL Cpu3Ist 68C MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-00000000be700000 Entering add_active_range(0, 0, 143) 0 entries of 3200 used Entering add_active_range(0, 256, 775747) 1 entries of 3200 used Entering add_active_range(0, 775878, 779771) 2 entries of 3200 used Entering add_active_range(0, 779784, 779941) 3 entries of 3200 used Entering add_active_range(0, 779946, 779947) 4 entries of 3200 used Entering add_active_range(0, 780031, 780032) 5 entries of 3200 used Bootmem setup node 0 0000000000000000-00000000be700000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[6] active PFN ranges 0: 0 -> 143 0: 256 -> 775747 0: 775878 -> 779771 0: 779784 -> 779941 0: 779946 -> 779947 0: 780031 -> 780032 On node 0 totalpages: 779686 DMA zone: 88 pages used for memmap DMA zone: 2367 pages reserved DMA zone: 1528 pages, LIFO batch:0 DMA32 zone: 16670 pages used for memmap DMA32 zone: 759033 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000008f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000bd643000 - 00000000bd6c6000 Nosave address range: 00000000be5fb000 - 00000000be608000 Nosave address range: 00000000be6a5000 - 00000000be6aa000 Nosave address range: 00000000be6ab000 - 00000000be6f2000 Nosave address range: 00000000be6f2000 - 00000000be6ff000 Allocating PCI resources starting at c0000000 (gap: bf000000:40f00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 44672 bytes of per cpu data Built 1 zonelists. Total pages: 760561 Kernel command line: ro root=LABEL=/ rhgb quiet selinux=0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2397.602 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3031908k/3120128k available (2465k kernel code, 86836k reserved, 1445k data, 332k init) Calibrating delay using timer specific routine.. 4798.40 BogoMIPS (lpj=2399204) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16649994 Detected 16.649 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4795.18 BogoMIPS (lpj=2397591) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=88 bytes sizeof(inode)=1008 bytes sizeof(dentry)=248 bytes sizeof(ext3inode)=1376 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=3776 bytes migration_cost=15 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved Time: tsc clocksource has been installed. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: d0500000-d05fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 2000-2fff MEM window: d0100000-d01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: d0600000-d06fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: d0700000-d07fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: d0800000-d08fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: d0000000-d00fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3078k freed audit: initializing netlink socket (disabled) audit(1178092655.600:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) ksign: Installing public key data Loading keyring - Added public key A777C0AD109752E5 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 965G Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 332k freed Write protecting the kernel read-only data: 1058k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0421c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0421800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb 3-2: device descriptor read/all, error -71 SCSI subsystem initialized libata version 2.20 loaded. ahci 0000:00:1f.2: version 2.1 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 usb 7-2: new high speed USB device using ehci_hcd and address 2 usb 7-2: configuration #1 chosen from 1 choice hub 7-2:1.0: USB hub found hub 7-2:1.0: 2 ports detected usb 7-2.1: new high speed USB device using ehci_hcd and address 3 usb 7-2.1: configuration #1 chosen from 1 choice hub 7-2.1:1.0: USB hub found hub 7-2.1:1.0: 4 ports detected usb 7-2.2: new low speed USB device using ehci_hcd and address 4 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xffffc2000002c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 ata2: SATA max UDMA/133 cmd 0xffffc2000002c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 ata3: SATA max UDMA/133 cmd 0xffffc2000002c200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 ata4: SATA max UDMA/133 cmd 0xffffc2000002c280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 ata5: SATA max UDMA/133 cmd 0xffffc2000002c300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 ata6: SATA max UDMA/133 cmd 0xffffc2000002c380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 scsi0 : ahci usb 7-2.2: configuration #1 chosen from 1 choice input: THRUSTMASTER FireStorm Dual Power as /class/input/input1 input: USB HID v1.10 Gamepad [THRUSTMASTER FireStorm Dual Power] on usb-0000:00:1d.7-2.2 usb 7-2.1.1: new high speed USB device using ehci_hcd and address 5 usb 7-2.1.1: configuration #1 chosen from 1 choice libusual: modprobe for usb-storage succeeded, but module is not present ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA/100 ata1.00: 312581808 sectors, multi 0: LBA48 ata1.00: configured for UDMA/100 scsi1 : ahci usb 7-2.1.2: new low speed USB device using ehci_hcd and address 6 usb 7-2.1.2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-2.1.2 input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-2.1.2 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA/100 ata2.00: 312581808 sectors, multi 0: LBA48 ata2.00: configured for UDMA/100 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: Attached scsi disk sdb Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi removable disk sdc sd 6:0:0:1: Attached scsi removable disk sdd kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:1: Attached scsi generic sg3 type 0 iTCO_vendor_support: vendor-support=0 input: PC Speaker as /class/input/input4 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:c9:22:af parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 fw_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:03 failed with error -16 gameport: EMU10K1 is pci0000:06:00.1/gameport0, io 0x1020, speed 1036kHz ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 ata7: PATA max UDMA/100 cmd 0x0000000000012018 ctl 0x0000000000012026 bmdma 0x0000000000012000 irq 17 scsi7 : pata_marvell BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ata7.00: ATAPI, max UDMA/33 fw_core: created new fw device fw0 (0 config rom retries) ata7.00: configured for UDMA/33 scsi 7:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 scsi 7:0:0:0: Attached scsi generic sg4 type 5 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 7:0:0:0: Attached scsi CD-ROM sr0 floppy0: no floppy controllers found lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 No dock devices found. input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] ibm_acpi: ec object not found device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EXT3 FS on sdb1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.8) Adding 2096472k swap on /dev/sdb2. Priority:-1 extents:1 across:2096472k e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22 e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i915 1.6.0 20060119 on minor 0