linux-kernel - Re: More JMicron troubles with 2.6.21

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <df47b87a0705021229o6fb42d06ka8e37d1fdc32520a@mail.gmail.com>
Date:	Wed, 2 May 2007 15:29:52 -0400
From:	"Ioan Ionita" <opslynx@...il.com>
To:	"Alan Cox" <alan@...rguk.ukuu.org.uk>
Cc:	"Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
	htejun@...il.com
Subject: Re: More JMicron troubles with 2.6.21

On 5/2/07, Alan Cox <alan@...rguk.ukuu.org.uk> wrote:
> This is almost certainly a problem outside of the IDE handling in that
> case. The jmicron controllers are smart, there is basically no code to
> the IDE driver to go wrong (especially in the case of using the old IDE
> for the PATA port where you basically use zero code that hasn't been
> tested for years).
Could this be a hardware problem then? The CD-ROM is recognized by
BIOS and I'm able to boot bootable CDs fine.
Could it be a setting in BIOS? I did try to switch from Enhanced to
Compatible mode, but problem persists.
With the ide driver, the device is recognized, but when I attempt to
mount it, il times out, gets reset and my machine locks up at times.
>
> Do you get the odd timeout or continuous timeouts ?
With the pata_jmicron, the device is not recognized. I get the
timeouts only during the probing during the boot phase.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/