linux-kernel - Re: libata /dev/scd0 problem: mount after burn fails without eject

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20070504083735.GA20072@janus>
Date:	Fri, 4 May 2007 10:37:35 +0200
From:	Frank van Maarseveen <frankvm@...nkvm.com>
To:	Tejun Heo <htejun@...il.com>
Cc:	Michal Piotrowski <michal.k.k.piotrowski@...il.com>,
	Mark Lord <lkml@....ca>,
	Frank van Maarseveen <frankvm@...nkvm.com>,
	linux-scsi <linux-scsi@...r.kernel.org>,
	IDE/ATA development list <linux-ide@...r.kernel.org>,
	linux-kernel@...r.kernel.org, Alan Cox <alan@...hat.com>
Subject: Re: libata /dev/scd0 problem: mount after burn fails without eject

On Fri, May 04, 2007 at 10:16:32AM +0200, Tejun Heo wrote:
> Michal Piotrowski wrote:
> > On 01/05/07, Mark Lord <lkml@....ca> wrote:
> >> Forwarding to linux-scsi and linux-ide mailing lists.
> >>
> >> Frank van Maarseveen wrote:
> >> > Tested on 2.6.20.6 and 2.6.21.1
> >> >
> >> > I decided to swich from the old IDE drivers to libata and now there
> >> > seems to be a little but annoying problem: cannot mount an ISO image
> >> > after burning it.
> >> >
> >> > May  1 14:32:55 kernel: attempt to access beyond end of device
> >> > May  1 14:32:55 kernel: sr0: rw=0, want=68, limit=4
> >> > May  1 14:32:55 kernel: isofs_fill_super: bread failed, dev=sr0,
> >> iso_blknum=16, block=16
> >> >
> >> > an "eject" command seems to fix the state of the PATA DVD writer
> >> > or driver. The problem occurs for burning a CD and for DVD too with
> >> > identical error messages.
> 
> Right after burning, if you run 'fuser -v /dev/sr0', what does it say?

Tried the fuser as root to be sure but it didn't show anything.

-- 
Frank
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/