linux-kernel - Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5486cca80705040956g47f634ddp80d67038e8e3305a@mail.gmail.com>
Date:	Fri, 4 May 2007 18:56:53 +0200
From:	"Antonino Ingargiola" <tritemio@...il.com>
To:	"Paul Fulghum" <paulkf@...rogate.com>
Cc:	"Alan Cox" <alan@...rguk.ukuu.org.uk>,
	linux-usb-users@...ts.sourceforge.net, linux-kernel@...r.kernel.org
Subject: Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]

On 5/4/07, Antonino Ingargiola <tritemio@...il.com> wrote:
> On 5/4/07, Paul Fulghum <paulkf@...rogate.com> wrote:
> > Here is a patch against 2.6.21 which flushes the tty flip buffer
> > on ioctl(TCFLSH) for input.
> >
> > --- a/drivers/char/tty_io.c     2007-04-25 22:08:32.000000000 -0500
> > +++ b/drivers/char/tty_io.c     2007-05-04 09:30:01.000000000 -0500
> <snip>
>
> Thanks! I've applied the patch and I'm building the kernel. I'll
> report the result.

The system blocks during booting. I can unblock it with SysReq+K but
then I'm unable to log into X.

The boot messages  seems ok (full gzipped boot log attached):

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

and when I pres the emergency keys:

kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: eth0: link up, 10Mbps, half-duplex, lpa 0x0000
kernel: NET: Registered protocol family 10
kernel: SysRq : SAK
kernel: SAK: killed process 1511 (vt-is-UTF8): process_session(p)==tty->session
kernel: SAK: killed process 1508 (unicode_start):
process_session(p)==tty->session
kernel: SAK: killed process 1409 (sh): process_session(p)==tty->session
kernel: SAK: killed process 301 (rc): process_session(p)==tty->session
kernel: SAK: killed process 298 (init): process_session(p)==tty->session
kernel: SAK: killed process 298 (init): process_session(p)==tty->session
kernel: SAK: killed process 301 (rc): process_session(p)==tty->session
kernel: SAK: killed process 1409 (sh): process_session(p)==tty->session
kernel: SAK: killed process 1508 (unicode_start):
process_session(p)==tty->session
kernel: SAK: killed process 1511 (vt-is-UTF8): process_session(p)==tty->session
kernel: ACPI: Processor [CPU0] (supports 2 throttling states)
kernel: [drm] Initialized drm 1.1.0 20060810
kernel: [drm] Initialized radeon 1.25.0 20060524 on minor 0
kernel: input: Power Button (FF) as /class/input/input4
kernel: ACPI: Power Button (FF) [PWRF]
kernel: input: Power Button (CM) as /class/input/input5

I'll try if I can make some serial test nevertheless from the console.

Regards,

  ~ Antonio

Download attachment "boot.log.gz" of type "application/x-gzip" (4046 bytes)