diff -ruN linux-2.6.21.orig/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c
--- linux-2.6.21.orig/arch/arm/mach-at91/board-sam9261ek.c	2007-05-04 15:51:34.000000000 +0200
+++ linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c	2007-05-07 16:45:04.000000000 +0200
@@ -59,6 +59,9 @@
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9261_initialize(18432000);
 
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
 	/* Setup the serial ports and console */
 	at91_init_serial(&ek_uart_config);
 }
diff -ruN linux-2.6.21.orig/arch/arm/mach-at91/Makefile linux-2.6.21/arch/arm/mach-at91/Makefile
--- linux-2.6.21.orig/arch/arm/mach-at91/Makefile	2007-05-04 15:51:34.000000000 +0200
+++ linux-2.6.21/arch/arm/mach-at91/Makefile	2007-05-07 17:34:21.000000000 +0200
@@ -38,6 +39,7 @@
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
 led-$(CONFIG_MACH_CSB337)	+= leds.o
 led-$(CONFIG_MACH_CSB637)	+= leds.o
 led-$(CONFIG_MACH_KB9200)	+= leds.o