[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <8CA5FD65-BEE1-4769-B1DF-81CA82210F61@cam.ac.uk>
Date: Tue, 8 May 2007 08:02:15 +0100
From: Michael-Luke Jones <mlj28@....ac.uk>
To: Krzysztof Halasa <khc@...waw.pl>
Cc: Jeff Garzik <jeff@...zik.org>, netdev@...r.kernel.org,
lkml <linux-kernel@...r.kernel.org>,
Russell King <rmk@....linux.org.uk>,
ARM Linux Mailing List
<linux-arm-kernel@...ts.arm.linux.org.uk>
Subject: Re: [PATCH] Intel IXP4xx network drivers v.2 - NPE
On 8 May 2007, at 01:36, Krzysztof Halasa wrote:
> Adds a driver for built-in IXP4xx Network Processor Engines.
> This patch requires IXP4xx Queue Manager driver and the "fuses" patch.
>
> Signed-off-by: Krzysztof Halasa <khc@...waw.pl>
[snip]
> diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-
> ixp4xx/ixp4xx_npe.c
> new file mode 100644
> index 0000000..4c77d8a
> --- /dev/null
> +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
Already in mach-ixp4xx, so can just be called npe.c
> @@ -0,0 +1,737 @@
> +/*
> + * Intel IXP4xx Network Processor Engine driver for Linux
> + *
> + * Copyright (C) 2007 Krzysztof Halasa <khc@...waw.pl>
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of version 2 of the GNU General Public License
> + * as published by the Free Software Foundation.
> + *
> + * The code is based on publicly available information:
> + * - Intel IXP4xx Developer's Manual and other e-papers
> + * - Intel IXP400 Access Library Software (BSD license)
> + * - previous works by Christian Hohnstaedt
> <chohnstaedt@...ominate.com>
> + * Thanks, Christian.
> + */
[snip]
> +int npe_load_firmware(struct npe *npe, const char *name, struct
> device *dev)
> +{
> + const struct firmware *fw_entry;
> +
> + struct dl_block {
> + u32 type;
> + u32 offset;
> + } *blk;
> +
> + struct dl_image {
> + u32 magic;
> + u32 id;
> + u32 size;
> + union {
> + u32 data[0];
> + struct dl_block blocks[0];
> + };
> + } *image;
> +
> + struct dl_codeblock {
> + u32 npe_addr;
> + u32 size;
> + u32 data[0];
> + } *cb;
> +
> + int i, j, err, data_size, instr_size, blocks, table_end;
> + u32 cmd;
> +
> + if ((err = request_firmware(&fw_entry, name, dev)) != 0)
> + return err;
> +
> + err = -EINVAL;
> + if (fw_entry->size < sizeof(struct dl_image)) {
> + print_npe(KERN_ERR, npe, "incomplete firmware file\n");
> + goto err;
> + }
> + image = (struct dl_image*)fw_entry->data;
> +
> +#if DEBUG_FW
> + print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)
> \n",
> + image->magic, image->id, image->size, image->size * 4);
> +#endif
> +
> + if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
> + image->id = swab32(image->id);
> + image->size = swab32(image->size);
> + } else if (image->magic != FW_MAGIC) {
> + print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
> + image->magic);
> + goto err;
> + }
> + if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
> + print_npe(KERN_ERR, npe,
> + "inconsistent size of firmware file\n");
> + goto err;
> + }
> + if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
> + print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
> + goto err;
> + }
> + if (image->magic == swab32(FW_MAGIC))
> + for (i = 0; i < image->size; i++)
> + image->data[i] = swab32(image->data[i]);
> +
> + if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
> + print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
> + "IXP42x\n");
> + goto err;
> + }
> +
> + if (npe_running(npe)) {
> + print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
> + "already running\n");
> + err = -EBUSY;
> + goto err;
> + }
> +#if 0
> + npe_stop(npe);
> + npe_reset(npe);
> +#endif
Debugging code? Can this go?
> + print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
> + "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
> + (image->id >> 8) & 0xFF, image->id & 0xFF);
> +
> + if (!cpu_is_ixp46x()) {
> + if (!npe->id)
> + instr_size = NPE_A_42X_INSTR_SIZE;
> + else
> + instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
> + data_size = NPE_42X_DATA_SIZE;
> + } else {
> + instr_size = NPE_46X_INSTR_SIZE;
> + data_size = NPE_46X_DATA_SIZE;
> + }
> +
> + for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
> + blocks++)
> + if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
> + break;
> + if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
> + print_npe(KERN_INFO, npe, "firmware EOF block marker not "
> + "found\n");
> + goto err;
> + }
> +
> +#if DEBUG_FW
> + print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
> +#endif
> +
> + table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF
> marker */;
> + for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
> + if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
> + || blk->offset < table_end) {
> + print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
> + "firmware block #%i\n", blk->offset, i);
> + goto err;
> + }
> +
> + cb = (struct dl_codeblock*)&image->data[blk->offset];
> + if (blk->type == FW_BLOCK_TYPE_INSTR) {
> + if (cb->npe_addr + cb->size > instr_size)
> + goto too_big;
> + cmd = CMD_WR_INS_MEM;
> + } else if (blk->type == FW_BLOCK_TYPE_DATA) {
> + if (cb->npe_addr + cb->size > data_size)
> + goto too_big;
> + cmd = CMD_WR_DATA_MEM;
> + } else {
> + print_npe(KERN_INFO, npe, "invalid firmware block #%i "
> + "type 0x%X\n", i, blk->type);
> + goto err;
> + }
> + if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
> + print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
> + "fit in firmware image: type %c, start 0x%X,"
> + " length 0x%X\n", i,
> + blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
> + cb->npe_addr, cb->size);
> + goto err;
> + }
> +
> + for (j = 0; j < cb->size; j++)
> + npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
> + }
> +
> + npe_start(npe);
> + if (!npe_running(npe))
> + print_npe(KERN_ERR, npe, "unable to start\n");
> + release_firmware(fw_entry);
> + return 0;
> +
> +too_big:
> + print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
> + "memory: type %c, start 0x%X, length 0x%X\n", i,
> + blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
> + cb->npe_addr, cb->size);
> +err:
> + release_firmware(fw_entry);
> + return err;
> +}
[snip]
> +module_init(npe_init_module);
> +module_exit(npe_cleanup_module);
> +
> +MODULE_AUTHOR("Krzysztof Halasa");
> +MODULE_LICENSE("GPL v2");
> +
> +EXPORT_SYMBOL(npe_names);
> +EXPORT_SYMBOL(npe_running);
> +EXPORT_SYMBOL(npe_request);
> +EXPORT_SYMBOL(npe_release);
> +EXPORT_SYMBOL(npe_load_firmware);
> +EXPORT_SYMBOL(npe_send_message);
> +EXPORT_SYMBOL(npe_recv_message);
> +EXPORT_SYMBOL(npe_send_recv_message);
> diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/
> arch-ixp4xx/npe.h
> new file mode 100644
> index 0000000..fd20bf5
> --- /dev/null
> +++ b/include/asm-arm/arch-ixp4xx/npe.h
> @@ -0,0 +1,41 @@
> +#ifndef __IXP4XX_NPE_H
> +#define __IXP4XX_NPE_H
> +
> +#include <linux/etherdevice.h>
> +#include <linux/kernel.h>
> +#include <asm/io.h>
> +
> +extern const char *npe_names[];
> +
> +struct npe_regs {
> + u32 exec_addr, exec_data, exec_status_cmd, exec_count;
> + u32 action_points[4];
> + u32 watchpoint_fifo, watch_count;
> + u32 profile_count;
> + u32 messaging_status, messaging_control;
> + u32 mailbox_status, /*messaging_*/ in_out_fifo;
> +};
> +
> +struct npe {
> + struct resource *mem_res;
> + struct npe_regs __iomem *regs;
> + u32 regs_phys;
> + int id;
> + int valid;
> +};
> +
> +
> +static inline const char *npe_name(struct npe *npe)
> +{
> + return npe_names[npe->id];
> +}
> +
> +int npe_running(struct npe *npe);
> +int npe_send_message(struct npe *npe, const void *msg, const char
> *what);
> +int npe_recv_message(struct npe *npe, void *msg, const char *what);
> +int npe_send_recv_message(struct npe *npe, void *msg, const char
> *what);
> +int npe_load_firmware(struct npe *npe, const char *name, struct
> device *dev);
> +struct npe *npe_request(int id);
> +void npe_release(struct npe *npe);
> +
> +#endif /* __IXP4XX_NPE_H */
It may be a matter of taste, but could some of the many definitions
at the top of ixp4xx_npe.c go in the header file here?
Michael-Luke
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists