| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070510004059.GA1784@havoc.gtf.org>
Date: Wed, 9 May 2007 20:40:59 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes, minor updates
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
Documentation/kernel-parameters.txt | 8 ---
drivers/ata/libata-acpi.c | 3 +-
drivers/ata/libata-core.c | 2 +
drivers/ata/pata_pcmcia.c | 1 +
drivers/ata/pata_qdi.c | 2 +-
drivers/ata/pata_scc.c | 4 +-
drivers/ata/sata_nv.c | 92 +++++++++++++++++++++++++++++-----
drivers/ata/sata_promise.c | 24 ++++++++--
drivers/ata/sata_via.c | 8 +++
9 files changed, 113 insertions(+), 31 deletions(-)
Alexey Dobriyan (1):
pata_scc: fix compilation
Jesse Barnes (1):
Doc Fix: remove mention of combined mode-related kernel parameters
Mikael Pettersson (2):
sata_promise: fix another error decode regression
sata_promise: SATAII-150/300 TX4 port numbering fix
Randy Dunlap (1):
libata: fix kernel-doc parameters
Richard Kennedy (1):
pata_pcmcia.c: add card ident for jvc cdrom
Robert Hancock (1):
sata_nv: fix ADMA freeze/thaw/irq_clear issues
Samuel Thibault (1):
Fix pata_qdi.c probe code
Tejun Heo (2):
libata-acpi: fix _GTF command protocol for ATAPI devices
sata_via: add missing PM hooks
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6b8ad06..09220a1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -754,14 +754,6 @@ and is between 256 and 4096 characters. It is defined in the file
inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
Format: <irq>
- combined_mode= [HW] control which driver uses IDE ports in combined
- mode: legacy IDE driver, libata, or both
- (in the libata case, libata.atapi_enabled=1 may be
- useful as well). Note that using the ide or libata
- options may affect your device naming (e.g. by
- changing hdc to sdb).
- Format: combined (default), ide, or libata
-
inttest= [IA64]
io7= [HW] IO7 for Marvel based alpha systems
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 03a0acf..cb3eab6 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -489,8 +489,7 @@ static void taskfile_load_raw(struct ata_port *ap,
/* convert gtf to tf */
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
- tf.protocol = atadev->class == ATA_DEV_ATAPI ?
- ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
+ tf.protocol = ATA_PROT_NODATA;
tf.feature = gtf->tfa[0]; /* 0x1f1 */
tf.nsect = gtf->tfa[1]; /* 0x1f2 */
tf.lbal = gtf->tfa[2]; /* 0x1f3 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fef87dd..4595d1f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -895,6 +895,7 @@ static u64 ata_read_native_max_address(struct ata_device *dev)
/**
* ata_set_native_max_address_ext - LBA48 native max set
* @dev: Device to query
+ * @new_sectors: new max sectors value to set for the device
*
* Perform an LBA48 size set max upon the device in question. Return the
* actual LBA48 size or zero if the command fails.
@@ -932,6 +933,7 @@ static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sector
/**
* ata_set_native_max_address - LBA28 native max set
* @dev: Device to query
+ * @new_sectors: new max sectors value to set for the device
*
* Perform an LBA28 size set max upon the device in question. Return the
* actual LBA28 size or zero if the command fails.
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 75dc847..11245e3 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -357,6 +357,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 27685ce..fb8c9e1 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -375,7 +375,7 @@ static __init int qdi_init(void)
res = inb(port + 3);
if (res & 1) {
/* Single channel mode */
- if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04))
+ if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
ct++;
} else {
/* Dual channel mode */
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 5df354d..203f463 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1142,14 +1142,14 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static int printed_version;
unsigned int board_idx = (unsigned int) ent->driver_data;
const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
- struct device *dev = &pdev->dev;
+ struct ata_host *host;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- host = ata_port_alloc_pinfo(&pdev->dev, ppi, 1);
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
if (!host)
return -ENOMEM;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index e2e795e..a097595 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -257,6 +257,8 @@ static void nv_adma_port_stop(struct ata_port *ap);
static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int nv_adma_port_resume(struct ata_port *ap);
#endif
+static void nv_adma_freeze(struct ata_port *ap);
+static void nv_adma_thaw(struct ata_port *ap);
static void nv_adma_error_handler(struct ata_port *ap);
static void nv_adma_host_stop(struct ata_host *host);
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
@@ -444,8 +446,8 @@ static const struct ata_port_operations nv_adma_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
- .freeze = nv_ck804_freeze,
- .thaw = nv_ck804_thaw,
+ .freeze = nv_adma_freeze,
+ .thaw = nv_adma_thaw,
.error_handler = nv_adma_error_handler,
.post_internal_cmd = nv_adma_post_internal_cmd,
.data_xfer = ata_data_xfer,
@@ -815,8 +817,16 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
u16 status;
u32 gen_ctl;
u32 notifier, notifier_error;
+
+ /* if ADMA is disabled, use standard ata interrupt handler */
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
+ u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
+ >> (NV_INT_PORT_SHIFT * i);
+ handled += nv_host_intr(ap, irq_stat);
+ continue;
+ }
- /* if in ATA register mode, use standard ata interrupt handler */
+ /* if in ATA register mode, check for standard interrupts */
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
>> (NV_INT_PORT_SHIFT * i);
@@ -826,7 +836,6 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
command is active, to prevent losing interrupts. */
irq_stat |= NV_INT_DEV;
handled += nv_host_intr(ap, irq_stat);
- continue;
}
notifier = readl(mmio + NV_ADMA_NOTIFIER);
@@ -912,22 +921,77 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
+static void nv_adma_freeze(struct ata_port *ap)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = pp->ctl_block;
+ u16 tmp;
+
+ nv_ck804_freeze(ap);
+
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ return;
+
+ /* clear any outstanding CK804 notifications */
+ writeb( NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT),
+ ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
+
+ /* Disable interrupt */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew( tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
+ mmio + NV_ADMA_CTL);
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+}
+
+static void nv_adma_thaw(struct ata_port *ap)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = pp->ctl_block;
+ u16 tmp;
+
+ nv_ck804_thaw(ap);
+
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ return;
+
+ /* Enable interrupt */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew( tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
+ mmio + NV_ADMA_CTL);
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+}
+
static void nv_adma_irq_clear(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
void __iomem *mmio = pp->ctl_block;
- u16 status = readw(mmio + NV_ADMA_STAT);
- u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
- u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
- void __iomem *dma_stat_addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
+ u32 notifier_clears[2];
- /* clear ADMA status */
- writew(status, mmio + NV_ADMA_STAT);
- writel(notifier | notifier_error,
- pp->notifier_clear_block);
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
+ ata_bmdma_irq_clear(ap);
+ return;
+ }
+
+ /* clear any outstanding CK804 notifications */
+ writeb( NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT),
+ ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
- /** clear legacy status */
- iowrite8(ioread8(dma_stat_addr), dma_stat_addr);
+ /* clear ADMA status */
+ writew(0xffff, mmio + NV_ADMA_STAT);
+
+ /* clear notifiers - note both ports need to be written with
+ something even though we are only clearing on one */
+ if (ap->port_no == 0) {
+ notifier_clears[0] = 0xFFFFFFFF;
+ notifier_clears[1] = 0;
+ } else {
+ notifier_clears[0] = 0;
+ notifier_clears[1] = 0xFFFFFFFF;
+ }
+ pp = ap->host->ports[0]->private_data;
+ writel(notifier_clears[0], pp->notifier_clear_block);
+ pp = ap->host->ports[1]->private_data;
+ writel(notifier_clears[1], pp->notifier_clear_block);
}
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index f56549b..3a7d9b5 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "2.05"
+#define DRV_VERSION "2.07"
enum {
@@ -653,6 +653,8 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
qc->err_mask |= ac_err_mask;
pdc_reset_port(ap);
+
+ ata_port_abort(ap);
}
static inline unsigned int pdc_host_intr( struct ata_port *ap,
@@ -924,6 +926,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
struct ata_host *host;
void __iomem *base;
int n_ports, i, rc;
+ int is_sataii_tx4;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -962,10 +965,23 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
}
host->iomap = pcim_iomap_table(pdev);
- for (i = 0; i < host->n_ports; i++)
+ is_sataii_tx4 = 0;
+ if ((pi->flags & (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) == (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) {
+ is_sataii_tx4 = 1;
+ dev_printk(KERN_INFO, &pdev->dev, "applying SATAII TX4 port numbering workaround\n");
+ }
+ for (i = 0; i < host->n_ports; i++) {
+ static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
+ int ata_nr;
+
+ ata_nr = i;
+ if (is_sataii_tx4)
+ ata_nr = sataii_tx4_port_remap[i];
+
pdc_ata_setup_port(host->ports[i],
- base + 0x200 + i * 0x80,
- base + 0x400 + i * 0x100);
+ base + 0x200 + ata_nr * 0x80,
+ base + 0x400 + ata_nr * 0x100);
+ }
/* initialize adapter */
pdc_host_init(host);
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 305ab7c..939c924 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -93,6 +93,10 @@ static struct pci_driver svia_pci_driver = {
.name = DRV_NAME,
.id_table = svia_pci_tbl,
.probe = svia_init_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
.remove = ata_pci_remove_one,
};
@@ -112,6 +116,10 @@ static struct scsi_host_template svia_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
+#endif
};
static const struct ata_port_operations vt6420_sata_ops = {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists