[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <Pine.LNX.4.64.0705100725020.31317@mtl.rackplans.net>
Date: Thu, 10 May 2007 07:27:28 -0400 (EDT)
From: Gerhard Mack <gmack@...erfire.net>
To: Mikael Pettersson <mikpe@...uu.se>
cc: Jeff Garzik <jeff@...zik.org>, linux-kernel@...r.kernel.org
Subject: Re: [2.6.21.1] SATA freeze
On Thu, 10 May 2007, Mikael Pettersson wrote:
> Date: Thu, 10 May 2007 10:51:57 +0200
> From: Mikael Pettersson <mikpe@...uu.se>
> To: Gerhard Mack <gmack@...erfire.net>
> Cc: Jeff Garzik <jeff@...zik.org>, linux-kernel@...r.kernel.org
> Subject: Re: [2.6.21.1] SATA freeze
>
> Gerhard Mack writes:
> > On Wed, 9 May 2007, Jeff Garzik wrote:
> > > Gerhard Mack wrote:
> > > > May 9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr
> > > > 0x1800000 action 0x2 frozen
> > > > May 9 14:51:35 mgerhard kernel: ata1.00: cmd
> > > > 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
> > > > May 9 14:51:35 mgerhard kernel: res
> > > > 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
> > > > May 9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be
> > > > patient (Status 0xd0)
> > > >
> > > > Anything I can do to figgure out what's causing this?
> > >
> > > Provide full lspci, dmesg, kernel config?
> > >
> > Done.
>
> Your second boot (warm or cold?)
Warm boot.
>
> > May 9 14:43:07 mgerhard kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
> > May 9 14:43:07 mgerhard kernel: Linux version 2.6.21.1 (root@...rhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Wed May 2 20:08:35 EDT 2007
> > May 9 14:43:07 mgerhard kernel: Command line: root=/dev/sda3 ro
>
> worked fine until ReiserFS's journal replay caused a single SATA exception:
>
> > May 9 14:43:07 mgerhard kernel: ReiserFS: sda3: There were 7 uncompleted unlinks/truncates. Completed
> > May 9 14:43:07 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
> > May 9 14:43:07 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
> > May 9 14:43:07 mgerhard kernel: ata1.00: cmd 35/00:58:20:4d:23/00:01:00:00:00/e0 tag 0 cdb 0x0 data 176128 out
> > May 9 14:43:07 mgerhard kernel: res 51/84:28:50:4d:23/84:01:00:00:00/e0 Emask 0x10 (ATA bus error)
> > May 9 14:43:07 mgerhard kernel: ata1: soft resetting port
> > May 9 14:43:07 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > May 9 14:43:07 mgerhard kernel: ata1.00: configured for UDMA/100
> > May 9 14:43:07 mgerhard kernel: ata1: EH complete
> > May 9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>
> Shortly thereafter you loaded a proprietary module
Oops thought I killed that.
>
> > May 9 14:43:17 mgerhard kernel: nvidia: module license 'NVIDIA' taints kernel.
> > May 9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
> > May 9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
> > May 9 14:43:17 mgerhard kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64
> > May 9 14:43:17 mgerhard kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006
>
> and immediately there's a large number of SATA exceptions:
>
> > May 9 14:44:37 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
> > May 9 14:44:37 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
> > May 9 14:44:37 mgerhard kernel: ata1.00: cmd 35/00:00:b0:53:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
> > May 9 14:44:37 mgerhard kernel: res 51/84:60:50:56:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
> > May 9 14:44:37 mgerhard kernel: ata1: soft resetting port
> > May 9 14:44:37 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > May 9 14:44:37 mgerhard kernel: ata1.00: configured for UDMA/100
> (repeated)
>
> Please try a cold boot (so the HW is in a pristine state) without
> ever loading the nvidia module.
Cold boot cleared the drive problems. Nvidia loaded or not has no affect
on it at this point.
Thanks for the help.
Gerhard
--
Gerhard Mack
gmack@...erfire.net
<>< As a computer I find your faith in technology amusing.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists