| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4649AC10.60903@sw.ru>
Date: Tue, 15 May 2007 16:48:16 +0400
From: Vasily Averin <vvs@...ru>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
devel@...nvz.org, Markus Lidel <Markus.Lidel@...dowconnect.com>
Subject: [patch i2o 6/6] i2o debug output cleanup
fixed output of i2o debug messages, extra KERN_ are removed
Signed-off-by: Vasily Averin <vvs@...ru>
--- lk2.6/drivers/message/i2o/debug.c
+++ lk2.6/drivers/message/i2o/debug.c
@@ -24,7 +24,7 @@ void i2o_report_status(const char *sever
if (cmd == I2O_CMD_UTIL_EVT_REGISTER)
return; // No status in this reply
- printk(KERN_DEBUG "%s%s: ", severity, str);
+ printk("%s%s: ", severity, str);
if (cmd < 0x1F) // Utility cmd
i2o_report_util_cmd(cmd);
@@ -32,7 +32,7 @@ void i2o_report_status(const char *sever
else if (cmd >= 0xA0 && cmd <= 0xEF) // Executive cmd
i2o_report_exec_cmd(cmd);
else
- printk(KERN_DEBUG "Cmd = %0#2x, ", cmd); // Other cmds
+ printk("Cmd = %0#2x, ", cmd); // Other cmds
if (msg[0] & MSG_FAIL) {
i2o_report_fail_status(req_status, msg);
@@ -44,7 +44,7 @@ void i2o_report_status(const char *sever
if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF))
i2o_report_common_dsc(detailed_status);
else
- printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n",
+ printk(" / DetailedStatus = %0#4x.\n",
detailed_status);
}
@@ -89,10 +89,10 @@ static void i2o_report_fail_status(u8 re
};
if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
- printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
+ printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
req_status);
else
- printk(KERN_DEBUG "TRANSPORT_%s.\n",
+ printk("TRANSPORT_%s.\n",
FAIL_STATUS[req_status & 0x0F]);
/* Dump some details */
@@ -104,7 +104,7 @@ static void i2o_report_fail_status(u8 re
printk(KERN_ERR " FailingHostUnit = 0x%04X, FailingIOP = 0x%03X\n",
msg[5] >> 16, msg[5] & 0xFFF);
- printk(KERN_ERR " Severity: 0x%02X ", (msg[4] >> 16) & 0xFF);
+ printk(KERN_ERR " Severity: 0x%02X\n", (msg[4] >> 16) & 0xFF);
if (msg[4] & (1 << 16))
printk(KERN_DEBUG "(FormatError), "
"this msg can never be delivered/processed.\n");
@@ -142,9 +142,9 @@ static void i2o_report_common_status(u8
};
if (req_status >= ARRAY_SIZE(REPLY_STATUS))
- printk(KERN_DEBUG "RequestStatus = %0#2x", req_status);
+ printk("RequestStatus = %0#2x", req_status);
else
- printk(KERN_DEBUG "%s", REPLY_STATUS[req_status]);
+ printk("%s", REPLY_STATUS[req_status]);
}
/*
@@ -187,10 +187,10 @@ static void i2o_report_common_dsc(u16 de
};
if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE)
- printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n",
+ printk(" / DetailedStatus = %0#4x.\n",
detailed_status);
else
- printk(KERN_DEBUG " / %s.\n", COMMON_DSC[detailed_status]);
+ printk(" / %s.\n", COMMON_DSC[detailed_status]);
}
/*
@@ -200,49 +200,49 @@ static void i2o_report_util_cmd(u8 cmd)
{
switch (cmd) {
case I2O_CMD_UTIL_NOP:
- printk(KERN_DEBUG "UTIL_NOP, ");
+ printk("UTIL_NOP, ");
break;
case I2O_CMD_UTIL_ABORT:
- printk(KERN_DEBUG "UTIL_ABORT, ");
+ printk("UTIL_ABORT, ");
break;
case I2O_CMD_UTIL_CLAIM:
- printk(KERN_DEBUG "UTIL_CLAIM, ");
+ printk("UTIL_CLAIM, ");
break;
case I2O_CMD_UTIL_RELEASE:
- printk(KERN_DEBUG "UTIL_CLAIM_RELEASE, ");
+ printk("UTIL_CLAIM_RELEASE, ");
break;
case I2O_CMD_UTIL_CONFIG_DIALOG:
- printk(KERN_DEBUG "UTIL_CONFIG_DIALOG, ");
+ printk("UTIL_CONFIG_DIALOG, ");
break;
case I2O_CMD_UTIL_DEVICE_RESERVE:
- printk(KERN_DEBUG "UTIL_DEVICE_RESERVE, ");
+ printk("UTIL_DEVICE_RESERVE, ");
break;
case I2O_CMD_UTIL_DEVICE_RELEASE:
- printk(KERN_DEBUG "UTIL_DEVICE_RELEASE, ");
+ printk("UTIL_DEVICE_RELEASE, ");
break;
case I2O_CMD_UTIL_EVT_ACK:
- printk(KERN_DEBUG "UTIL_EVENT_ACKNOWLEDGE, ");
+ printk("UTIL_EVENT_ACKNOWLEDGE, ");
break;
case I2O_CMD_UTIL_EVT_REGISTER:
- printk(KERN_DEBUG "UTIL_EVENT_REGISTER, ");
+ printk("UTIL_EVENT_REGISTER, ");
break;
case I2O_CMD_UTIL_LOCK:
- printk(KERN_DEBUG "UTIL_LOCK, ");
+ printk("UTIL_LOCK, ");
break;
case I2O_CMD_UTIL_LOCK_RELEASE:
- printk(KERN_DEBUG "UTIL_LOCK_RELEASE, ");
+ printk("UTIL_LOCK_RELEASE, ");
break;
case I2O_CMD_UTIL_PARAMS_GET:
- printk(KERN_DEBUG "UTIL_PARAMS_GET, ");
+ printk("UTIL_PARAMS_GET, ");
break;
case I2O_CMD_UTIL_PARAMS_SET:
- printk(KERN_DEBUG "UTIL_PARAMS_SET, ");
+ printk("UTIL_PARAMS_SET, ");
break;
case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY:
- printk(KERN_DEBUG "UTIL_REPLY_FAULT_NOTIFY, ");
+ printk("UTIL_REPLY_FAULT_NOTIFY, ");
break;
default:
- printk(KERN_DEBUG "Cmd = %0#2x, ", cmd);
+ printk("Cmd = %0#2x, ", cmd);
}
}
@@ -253,106 +253,106 @@ static void i2o_report_exec_cmd(u8 cmd)
{
switch (cmd) {
case I2O_CMD_ADAPTER_ASSIGN:
- printk(KERN_DEBUG "EXEC_ADAPTER_ASSIGN, ");
+ printk("EXEC_ADAPTER_ASSIGN, ");
break;
case I2O_CMD_ADAPTER_READ:
- printk(KERN_DEBUG "EXEC_ADAPTER_READ, ");
+ printk("EXEC_ADAPTER_READ, ");
break;
case I2O_CMD_ADAPTER_RELEASE:
- printk(KERN_DEBUG "EXEC_ADAPTER_RELEASE, ");
+ printk("EXEC_ADAPTER_RELEASE, ");
break;
case I2O_CMD_BIOS_INFO_SET:
- printk(KERN_DEBUG "EXEC_BIOS_INFO_SET, ");
+ printk("EXEC_BIOS_INFO_SET, ");
break;
case I2O_CMD_BOOT_DEVICE_SET:
- printk(KERN_DEBUG "EXEC_BOOT_DEVICE_SET, ");
+ printk("EXEC_BOOT_DEVICE_SET, ");
break;
case I2O_CMD_CONFIG_VALIDATE:
- printk(KERN_DEBUG "EXEC_CONFIG_VALIDATE, ");
+ printk("EXEC_CONFIG_VALIDATE, ");
break;
case I2O_CMD_CONN_SETUP:
- printk(KERN_DEBUG "EXEC_CONN_SETUP, ");
+ printk("EXEC_CONN_SETUP, ");
break;
case I2O_CMD_DDM_DESTROY:
- printk(KERN_DEBUG "EXEC_DDM_DESTROY, ");
+ printk("EXEC_DDM_DESTROY, ");
break;
case I2O_CMD_DDM_ENABLE:
- printk(KERN_DEBUG "EXEC_DDM_ENABLE, ");
+ printk("EXEC_DDM_ENABLE, ");
break;
case I2O_CMD_DDM_QUIESCE:
- printk(KERN_DEBUG "EXEC_DDM_QUIESCE, ");
+ printk("EXEC_DDM_QUIESCE, ");
break;
case I2O_CMD_DDM_RESET:
- printk(KERN_DEBUG "EXEC_DDM_RESET, ");
+ printk("EXEC_DDM_RESET, ");
break;
case I2O_CMD_DDM_SUSPEND:
- printk(KERN_DEBUG "EXEC_DDM_SUSPEND, ");
+ printk("EXEC_DDM_SUSPEND, ");
break;
case I2O_CMD_DEVICE_ASSIGN:
- printk(KERN_DEBUG "EXEC_DEVICE_ASSIGN, ");
+ printk("EXEC_DEVICE_ASSIGN, ");
break;
case I2O_CMD_DEVICE_RELEASE:
- printk(KERN_DEBUG "EXEC_DEVICE_RELEASE, ");
+ printk("EXEC_DEVICE_RELEASE, ");
break;
case I2O_CMD_HRT_GET:
- printk(KERN_DEBUG "EXEC_HRT_GET, ");
+ printk("EXEC_HRT_GET, ");
break;
case I2O_CMD_ADAPTER_CLEAR:
- printk(KERN_DEBUG "EXEC_IOP_CLEAR, ");
+ printk("EXEC_IOP_CLEAR, ");
break;
case I2O_CMD_ADAPTER_CONNECT:
- printk(KERN_DEBUG "EXEC_IOP_CONNECT, ");
+ printk("EXEC_IOP_CONNECT, ");
break;
case I2O_CMD_ADAPTER_RESET:
- printk(KERN_DEBUG "EXEC_IOP_RESET, ");
+ printk("EXEC_IOP_RESET, ");
break;
case I2O_CMD_LCT_NOTIFY:
- printk(KERN_DEBUG "EXEC_LCT_NOTIFY, ");
+ printk("EXEC_LCT_NOTIFY, ");
break;
case I2O_CMD_OUTBOUND_INIT:
- printk(KERN_DEBUG "EXEC_OUTBOUND_INIT, ");
+ printk("EXEC_OUTBOUND_INIT, ");
break;
case I2O_CMD_PATH_ENABLE:
- printk(KERN_DEBUG "EXEC_PATH_ENABLE, ");
+ printk("EXEC_PATH_ENABLE, ");
break;
case I2O_CMD_PATH_QUIESCE:
- printk(KERN_DEBUG "EXEC_PATH_QUIESCE, ");
+ printk("EXEC_PATH_QUIESCE, ");
break;
case I2O_CMD_PATH_RESET:
- printk(KERN_DEBUG "EXEC_PATH_RESET, ");
+ printk("EXEC_PATH_RESET, ");
break;
case I2O_CMD_STATIC_MF_CREATE:
- printk(KERN_DEBUG "EXEC_STATIC_MF_CREATE, ");
+ printk("EXEC_STATIC_MF_CREATE, ");
break;
case I2O_CMD_STATIC_MF_RELEASE:
- printk(KERN_DEBUG "EXEC_STATIC_MF_RELEASE, ");
+ printk("EXEC_STATIC_MF_RELEASE, ");
break;
case I2O_CMD_STATUS_GET:
- printk(KERN_DEBUG "EXEC_STATUS_GET, ");
+ printk("EXEC_STATUS_GET, ");
break;
case I2O_CMD_SW_DOWNLOAD:
- printk(KERN_DEBUG "EXEC_SW_DOWNLOAD, ");
+ printk("EXEC_SW_DOWNLOAD, ");
break;
case I2O_CMD_SW_UPLOAD:
- printk(KERN_DEBUG "EXEC_SW_UPLOAD, ");
+ printk("EXEC_SW_UPLOAD, ");
break;
case I2O_CMD_SW_REMOVE:
- printk(KERN_DEBUG "EXEC_SW_REMOVE, ");
+ printk("EXEC_SW_REMOVE, ");
break;
case I2O_CMD_SYS_ENABLE:
- printk(KERN_DEBUG "EXEC_SYS_ENABLE, ");
+ printk("EXEC_SYS_ENABLE, ");
break;
case I2O_CMD_SYS_MODIFY:
- printk(KERN_DEBUG "EXEC_SYS_MODIFY, ");
+ printk("EXEC_SYS_MODIFY, ");
break;
case I2O_CMD_SYS_QUIESCE:
- printk(KERN_DEBUG "EXEC_SYS_QUIESCE, ");
+ printk("EXEC_SYS_QUIESCE, ");
break;
case I2O_CMD_SYS_TAB_SET:
- printk(KERN_DEBUG "EXEC_SYS_TAB_SET, ");
+ printk("EXEC_SYS_TAB_SET, ");
break;
default:
- printk(KERN_DEBUG "Cmd = %#02x, ", cmd);
+ printk("Cmd = %#02x, ", cmd);
}
}
@@ -361,28 +361,28 @@ void i2o_debug_state(struct i2o_controll
printk(KERN_INFO "%s: State = ", c->name);
switch (((i2o_status_block *) c->status_block.virt)->iop_state) {
case 0x01:
- printk(KERN_DEBUG "INIT\n");
+ printk("INIT\n");
break;
case 0x02:
- printk(KERN_DEBUG "RESET\n");
+ printk("RESET\n");
break;
case 0x04:
- printk(KERN_DEBUG "HOLD\n");
+ printk("HOLD\n");
break;
case 0x05:
- printk(KERN_DEBUG "READY\n");
+ printk("READY\n");
break;
case 0x08:
- printk(KERN_DEBUG "OPERATIONAL\n");
+ printk("OPERATIONAL\n");
break;
case 0x10:
- printk(KERN_DEBUG "FAILED\n");
+ printk("FAILED\n");
break;
case 0x11:
- printk(KERN_DEBUG "FAULTED\n");
+ printk("FAULTED\n");
break;
default:
- printk(KERN_DEBUG "%x (unknown !!)\n",
+ printk("%x (unknown !!)\n",
((i2o_status_block *) c->status_block.virt)->iop_state);
}
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists