[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070515200359.GA5834@amitarora.in.ibm.com>
Date: Wed, 16 May 2007 01:33:59 +0530
From: "Amit K. Arora" <aarora@...ux.vnet.ibm.com>
To: torvalds@...l.org, akpm@...ux-foundation.org
Cc: linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-ext4@...r.kernel.org, xfs@....sgi.com, suparna@...ibm.com,
cmm@...ibm.com
Subject: [PATCH 1/5][TAKE3] fallocate() implementation on i86, x86_64 and powerpc
This patch implements sys_fallocate() and adds support on i386, x86_64
and powerpc platforms.
Changelog:
---------
Note: The changes below are from the initial post (dated 26th April,
2007) and _not_ from TAKE2. The only difference from TAKE2 is the kernel
version on which this patch is based. TAKE2 was based on 2.6.21 and this
is based on 2.6.22-rc1.
Following changes were made to the previous version:
1) Added description before sys_fallocate() definition.
2) Return EINVAL for len<=0 (With new draft that Ulrich pointed to,
posix_fallocate should return EINVAL for len <= 0.
3) Return EOPNOTSUPP if mode is not one of FA_ALLOCATE or FA_DEALLOCATE
4) Do not return ENODEV for dirs (let individual file systems decide if
they want to support preallocation to directories or not.
5) Check for wrap through zero.
6) Update c/mtime if fallocate() succeeds.
7) Added mode descriptions in fs.h
8) Added variable names to function definition (fallocate inode op)
Here is the new patch:
Signed-off-by: Amit Arora <aarora@...ibm.com>
---
arch/i386/kernel/syscall_table.S | 1
arch/powerpc/kernel/sys_ppc32.c | 7 +++
arch/x86_64/ia32/ia32entry.S | 1
fs/open.c | 89 +++++++++++++++++++++++++++++++++++++++
include/asm-i386/unistd.h | 3 -
include/asm-powerpc/systbl.h | 1
include/asm-powerpc/unistd.h | 3 -
include/asm-x86_64/unistd.h | 2
include/linux/fs.h | 13 +++++
include/linux/syscalls.h | 1
10 files changed, 119 insertions(+), 2 deletions(-)
Index: linux-2.6.22-rc1/arch/i386/kernel/syscall_table.S
===================================================================
--- linux-2.6.22-rc1.orig/arch/i386/kernel/syscall_table.S
+++ linux-2.6.22-rc1/arch/i386/kernel/syscall_table.S
@@ -323,3 +323,4 @@ ENTRY(sys_call_table)
.long sys_signalfd
.long sys_timerfd
.long sys_eventfd
+ .long sys_fallocate
Index: linux-2.6.22-rc1/arch/powerpc/kernel/sys_ppc32.c
===================================================================
--- linux-2.6.22-rc1.orig/arch/powerpc/kernel/sys_ppc32.c
+++ linux-2.6.22-rc1/arch/powerpc/kernel/sys_ppc32.c
@@ -773,6 +773,13 @@ asmlinkage int compat_sys_truncate64(con
return sys_truncate(path, (high << 32) | low);
}
+asmlinkage long compat_sys_fallocate(int fd, int mode, u32 offhi, u32 offlo,
+ u32 lenhi, u32 lenlo)
+{
+ return sys_fallocate(fd, mode, ((loff_t)offhi << 32) | offlo,
+ ((loff_t)lenhi << 32) | lenlo);
+}
+
asmlinkage int compat_sys_ftruncate64(unsigned int fd, u32 reg4, unsigned long high,
unsigned long low)
{
Index: linux-2.6.22-rc1/fs/open.c
===================================================================
--- linux-2.6.22-rc1.orig/fs/open.c
+++ linux-2.6.22-rc1/fs/open.c
@@ -353,6 +353,95 @@ asmlinkage long sys_ftruncate64(unsigned
#endif
/*
+ * sys_fallocate - preallocate blocks or free preallocated blocks
+ * @fd: the file descriptor
+ * @mode: mode specifies if fallocate should preallocate blocks OR free
+ * (unallocate) preallocated blocks. Currently only FA_ALLOCATE and
+ * FA_DEALLOCATE modes are supported.
+ * @offset: The offset within file, from where (un)allocation is being
+ * requested. It should not have a negative value.
+ * @len: The amount (in bytes) of space to be (un)allocated, from the offset.
+ *
+ * This system call, depending on the mode, preallocates or unallocates blocks
+ * for a file. The range of blocks depends on the value of offset and len
+ * arguments provided by the user/application. For FA_ALLOCATE mode, if this
+ * system call succeeds, subsequent writes to the file in the given range
+ * (specified by offset & len) should not fail - even if the file system
+ * later becomes full. Hence the preallocation done is persistent (valid
+ * even after reopen of the file and remount/reboot).
+ *
+ * Note: Incase the file system does not support preallocation,
+ * posix_fallocate() should fall back to the library implementation (i.e.
+ * allocating zero-filled new blocks to the file).
+ *
+ * Return Values
+ * 0 : On SUCCESS a value of zero is returned.
+ * error : On Failure, an error code will be returned.
+ * An error code of -ENOSYS or -EOPNOTSUPP should make posix_fallocate()
+ * fall back on library implementation of fallocate.
+ *
+ * <TBD> Generic fallocate to be added for file systems that do not
+ * support fallocate it.
+ */
+asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len)
+{
+ struct file *file;
+ struct inode *inode;
+ long ret = -EINVAL;
+
+ if (offset < 0 || len <= 0)
+ goto out;
+
+ /* Return error if mode is not supported */
+ ret = -EOPNOTSUPP;
+ if (mode != FA_ALLOCATE && mode !=FA_DEALLOCATE)
+ goto out;
+
+ ret = -EBADF;
+ file = fget(fd);
+ if (!file)
+ goto out;
+ if (!(file->f_mode & FMODE_WRITE))
+ goto out_fput;
+
+ inode = file->f_path.dentry->d_inode;
+
+ ret = -ESPIPE;
+ if (S_ISFIFO(inode->i_mode))
+ goto out_fput;
+
+ ret = -ENODEV;
+ /*
+ * Let individual file system decide if it supports preallocation
+ * for directories or not.
+ */
+ if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
+ goto out_fput;
+
+ ret = -EFBIG;
+ /* Check for wrap through zero too */
+ if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0))
+ goto out_fput;
+
+ if (inode->i_op && inode->i_op->fallocate)
+ ret = inode->i_op->fallocate(inode, mode, offset, len);
+ else
+ ret = -ENOSYS;
+
+ /*
+ * Update [cm]time.
+ * Partial allocation will not result in the time stamp changes,
+ * since ->fallocate will return error (say, -ENOSPC) in this case.
+ */
+ if (!ret)
+ file_update_time(file);
+out_fput:
+ fput(file);
+out:
+ return ret;
+}
+
+/*
* access() needs to use the real uid/gid, not the effective uid/gid.
* We do this by temporarily clearing all FS-related capabilities and
* switching the fsuid/fsgid around to the real ones.
Index: linux-2.6.22-rc1/include/asm-i386/unistd.h
===================================================================
--- linux-2.6.22-rc1.orig/include/asm-i386/unistd.h
+++ linux-2.6.22-rc1/include/asm-i386/unistd.h
@@ -329,10 +329,11 @@
#define __NR_signalfd 321
#define __NR_timerfd 322
#define __NR_eventfd 323
+#define __NR_fallocate 324
#ifdef __KERNEL__
-#define NR_syscalls 324
+#define NR_syscalls 325
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
Index: linux-2.6.22-rc1/include/asm-powerpc/systbl.h
===================================================================
--- linux-2.6.22-rc1.orig/include/asm-powerpc/systbl.h
+++ linux-2.6.22-rc1/include/asm-powerpc/systbl.h
@@ -308,3 +308,4 @@ COMPAT_SYS_SPU(move_pages)
SYSCALL_SPU(getcpu)
COMPAT_SYS(epoll_pwait)
COMPAT_SYS_SPU(utimensat)
+COMPAT_SYS(fallocate)
Index: linux-2.6.22-rc1/include/asm-powerpc/unistd.h
===================================================================
--- linux-2.6.22-rc1.orig/include/asm-powerpc/unistd.h
+++ linux-2.6.22-rc1/include/asm-powerpc/unistd.h
@@ -327,10 +327,11 @@
#define __NR_getcpu 302
#define __NR_epoll_pwait 303
#define __NR_utimensat 304
+#define __NR_fallocate 305
#ifdef __KERNEL__
-#define __NR_syscalls 305
+#define __NR_syscalls 306
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
Index: linux-2.6.22-rc1/include/asm-x86_64/unistd.h
===================================================================
--- linux-2.6.22-rc1.orig/include/asm-x86_64/unistd.h
+++ linux-2.6.22-rc1/include/asm-x86_64/unistd.h
@@ -630,6 +630,8 @@ __SYSCALL(__NR_signalfd, sys_signalfd)
__SYSCALL(__NR_timerfd, sys_timerfd)
#define __NR_eventfd 283
__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_fallocate 284
+__SYSCALL(__NR_fallocate, sys_fallocate)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
Index: linux-2.6.22-rc1/include/linux/fs.h
===================================================================
--- linux-2.6.22-rc1.orig/include/linux/fs.h
+++ linux-2.6.22-rc1/include/linux/fs.h
@@ -266,6 +266,17 @@ extern int dir_notify_enable;
#define SYNC_FILE_RANGE_WRITE 2
#define SYNC_FILE_RANGE_WAIT_AFTER 4
+/*
+ * sys_fallocate modes
+ * Currently sys_fallocate supports two modes:
+ * FA_ALLOCATE : This is the preallocate mode, using which an application/user
+ * may request (pre)allocation of blocks.
+ * FA_DEALLOCATE: This is the deallocate mode, which can be used to free
+ * the preallocated blocks.
+ */
+#define FA_ALLOCATE 0x1
+#define FA_DEALLOCATE 0x2
+
#ifdef __KERNEL__
#include <linux/linkage.h>
@@ -1137,6 +1148,8 @@ struct inode_operations {
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
void (*truncate_range)(struct inode *, loff_t, loff_t);
+ long (*fallocate)(struct inode *inode, int mode, loff_t offset,
+ loff_t len);
};
struct seq_file;
Index: linux-2.6.22-rc1/include/linux/syscalls.h
===================================================================
--- linux-2.6.22-rc1.orig/include/linux/syscalls.h
+++ linux-2.6.22-rc1/include/linux/syscalls.h
@@ -608,6 +608,7 @@ asmlinkage long sys_signalfd(int ufd, si
asmlinkage long sys_timerfd(int ufd, int clockid, int flags,
const struct itimerspec __user *utmr);
asmlinkage long sys_eventfd(unsigned int count);
+asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
Index: linux-2.6.22-rc1/arch/x86_64/ia32/ia32entry.S
===================================================================
--- linux-2.6.22-rc1.orig/arch/x86_64/ia32/ia32entry.S
+++ linux-2.6.22-rc1/arch/x86_64/ia32/ia32entry.S
@@ -719,4 +719,5 @@ ia32_sys_call_table:
.quad compat_sys_signalfd
.quad compat_sys_timerfd
.quad sys_eventfd
+ .quad sys_fallocate
ia32_syscall_end:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists