lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070515044515.GA6731@lixom.net>
Date:	Mon, 14 May 2007 23:45:15 -0500
From:	olof@...om.net (Olof Johansson)
To:	paulus@...ba.org
Cc:	linuxppc-dev@...abs.org, linux-kernel@...r.kernel.org,
	linux-pcmcia@...ts.infradead.org,
	Russell King <rmk+lkml@....linux.org.uk>
Subject: [PATCH] pasemi: Electra CF driver

Driver for the CompactFlash slot on the PA Semi Electra eval board. It's
a simple device sitting on localbus, with interrupts and detect/voltage
control over GPIO.

The driver is implemented as an of_platform driver, and adds localbus
as a bus being probed by the of_platform framework.


Signed-off-by: Olof Johansson <olof@...om.net>

---

Updated based on review comments from Russell, as well as retooled for
the I/O space changes (as discussed with Arnd/BenH).

This patch depends on the PCMCIA pcmcia_bus_type export to compile:

http://lists.infradead.org/pipermail/linux-pcmcia/2007-May/004628.html

and on the ioaddr_t change to work at runtime:

http://patchwork.ozlabs.org/linuxppc/patch?id=11147

Also, had to switch to bool config option since the iospace functions
aren't exported (starting with .23 we should be able to switch back to
tristate). Keep all the module init/remove calls for now.


Index: powerpc/drivers/pcmcia/Kconfig
===================================================================
--- powerpc.orig/drivers/pcmcia/Kconfig
+++ powerpc/drivers/pcmcia/Kconfig
@@ -270,6 +270,13 @@ config AT91_CF
 	  Say Y here to support the CompactFlash controller on AT91 chips.
 	  Or choose M to compile the driver as a module named "at91_cf".
 
+config ELECTRA_CF
+	bool "Electra CompactFlash Controller"
+	depends on PCMCIA=y && PPC_PASEMI
+	help
+	  Say Y here to support the CompactFlash controller on the
+	  PA Semi Electra eval board.
+
 config PCCARD_NONSTATIC
 	tristate
 
Index: powerpc/drivers/pcmcia/Makefile
===================================================================
--- powerpc.orig/drivers/pcmcia/Makefile
+++ powerpc/drivers/pcmcia/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc417
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
 obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
 obj-$(CONFIG_AT91_CF)				+= at91_cf.o
+obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
 
 sa11xx_core-y					+= soc_common.o sa11xx_base.o
 pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
Index: powerpc/drivers/pcmcia/electra_cf.c
===================================================================
--- /dev/null
+++ powerpc/drivers/pcmcia/electra_cf.c
@@ -0,0 +1,382 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Maintained by: Olof Johansson <olof@...om.net>
+ *
+ * Based on drivers/pcmcia/omap_cf.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <pcmcia/ss.h>
+#include <asm/of_platform.h>
+
+static const char driver_name[] = "electra-cf";
+
+struct electra_cf_socket {
+	struct pcmcia_socket	socket;
+
+	struct timer_list	timer;
+	unsigned		present:1;
+	unsigned		active:1;
+
+	struct of_device	*ofdev;
+	unsigned long		mem_phys;
+	void __iomem *		mem_base;
+	unsigned long		mem_size;
+	void __iomem *		io_virt;
+	unsigned int		io_base;
+	unsigned int		io_size;
+	u_int			irq;
+	struct resource		iomem;
+	void __iomem *		gpio_base;
+	int			gpio_detect;
+	int			gpio_vsense;
+	int			gpio_3v;
+	int			gpio_5v;
+};
+
+#define	POLL_INTERVAL		(2 * HZ)
+
+
+static int electra_cf_present(struct electra_cf_socket *cf)
+{
+	unsigned int gpio;
+
+	gpio = in_le32(cf->gpio_base+0x40);
+	return !(gpio & (1 << cf->gpio_detect));
+}
+
+static int electra_cf_ss_init(struct pcmcia_socket *s)
+{
+	return 0;
+}
+
+/* the timer is primarily to kick this socket's pccardd */
+static void electra_cf_timer(unsigned long _cf)
+{
+	struct electra_cf_socket *cf = (void *) _cf;
+	int present = electra_cf_present(cf);
+
+	if (present != cf->present) {
+		cf->present = present;
+		pcmcia_parse_events(&cf->socket, SS_DETECT);
+	}
+
+	if (cf->active)
+		mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
+}
+
+static irqreturn_t electra_cf_irq(int irq, void *_cf)
+{
+	electra_cf_timer((unsigned long)_cf);
+	return IRQ_HANDLED;
+}
+
+static int electra_cf_get_status(struct pcmcia_socket *s, u_int *sp)
+{
+	struct electra_cf_socket *cf;
+
+	if (!sp)
+		return -EINVAL;
+
+	cf = container_of(s, struct electra_cf_socket, socket);
+
+	/* NOTE CF is always 3VCARD */
+	if (electra_cf_present(cf)) {
+		struct electra_cf_socket *cf;
+
+		*sp = SS_READY | SS_DETECT | SS_POWERON | SS_3VCARD;
+		cf = container_of(s, struct electra_cf_socket, socket);
+		s->pci_irq = cf->irq;
+	} else
+		*sp = 0;
+	return 0;
+}
+
+static int electra_cf_set_socket(struct pcmcia_socket *sock,
+				 struct socket_state_t *s)
+{
+	unsigned int gpio;
+	unsigned int vcc;
+	struct electra_cf_socket *cf;
+
+	cf = container_of(sock, struct electra_cf_socket, socket);
+
+	/* "reset" means no power in our case */
+	vcc = (s->flags & SS_RESET) ? 0 : s->Vcc;
+
+	switch (vcc) {
+	case 0:
+		gpio = 0;
+		break;
+	case 33:
+		gpio = (1 << cf->gpio_3v);
+		break;
+	default:
+		/* CF is 3.3V only */
+		return -EINVAL;
+	}
+
+	gpio |= 1 << (cf->gpio_3v + 16); /* enwr */
+	gpio |= 1 << (cf->gpio_5v + 16); /* enwr */
+	out_le32(cf->gpio_base+0x90, gpio);
+
+	pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
+		driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
+
+	return 0;
+}
+
+static int electra_cf_set_io_map(struct pcmcia_socket *s,
+				 struct pccard_io_map *io)
+{
+	return 0;
+}
+
+static int electra_cf_set_mem_map(struct pcmcia_socket *s,
+				  struct pccard_mem_map *map)
+{
+	struct electra_cf_socket *cf;
+
+	if (map->card_start)
+		return -EINVAL;
+	cf = container_of(s, struct electra_cf_socket, socket);
+	map->static_start = cf->mem_phys;
+	map->flags &= MAP_ACTIVE|MAP_ATTRIB;
+	if (!(map->flags & MAP_ATTRIB))
+		map->static_start += 0x800;
+	return 0;
+}
+
+static struct pccard_operations electra_cf_ops = {
+	.init			= electra_cf_ss_init,
+	.get_status		= electra_cf_get_status,
+	.set_socket		= electra_cf_set_socket,
+	.set_io_map		= electra_cf_set_io_map,
+	.set_mem_map		= electra_cf_set_mem_map,
+};
+
+static int __devinit electra_cf_probe(struct of_device *ofdev,
+				      const struct of_device_id *match)
+{
+	struct device *device = &ofdev->dev;
+	struct device_node *np = ofdev->node;
+	struct electra_cf_socket   *cf;
+	struct resource mem, io;
+	int status;
+	const unsigned int *prop;
+	int err;
+
+	err = of_address_to_resource(np, 0, &mem);
+	if (err)
+		return -EINVAL;
+
+	err = of_address_to_resource(np, 1, &io);
+	if (err)
+		return -EINVAL;
+
+	cf = kzalloc(sizeof *cf, GFP_KERNEL);
+	if (!cf)
+		return -ENOMEM;
+
+	init_timer(&cf->timer);
+	cf->timer.function = electra_cf_timer;
+	cf->timer.data = (unsigned long) cf;
+
+	cf->ofdev = ofdev;
+	cf->mem_phys = mem.start;
+	cf->mem_base = ioremap(mem.start, mem.end - mem.start);
+	cf->io_size = PAGE_ALIGN(io.end - io.start);
+
+	cf->io_virt = reserve_phb_iospace(cf->io_size);
+
+	cf->gpio_base = ioremap(0xfc103000, 0x1000);
+	dev_set_drvdata(device, cf);
+
+	if (!cf->mem_base || !cf->io_virt || !cf->gpio_base) {
+		dev_err(device, "can't ioremap ranges\n");
+		status = -ENOMEM;
+		goto fail1;
+	}
+
+	__ioremap_explicit(io.start, (unsigned long)cf->io_virt, cf->io_size,
+			   _PAGE_NO_CACHE | _PAGE_GUARDED);
+
+	cf->io_base = (unsigned long)cf->io_virt - VMALLOC_END;
+
+	cf->iomem.start = (unsigned long)cf->mem_base;
+	cf->iomem.end = (unsigned long)cf->mem_base + (mem.end - mem.start);
+	cf->iomem.flags = IORESOURCE_MEM;
+
+	cf->irq = irq_of_parse_and_map(np, 0);
+
+	status = request_irq(cf->irq, electra_cf_irq, IRQF_SHARED,
+			     driver_name, cf);
+	if (status < 0) {
+		dev_err(device, "request_irq failed\n");
+		goto fail1;
+	}
+
+	cf->socket.pci_irq = cf->irq;
+
+	prop = get_property(np, "card-detect-gpio", NULL);
+	cf->gpio_detect = *prop;
+	prop = get_property(np, "card-vsense-gpio", NULL);
+	cf->gpio_vsense = *prop;
+	prop = get_property(np, "card-3v-gpio", NULL);
+	cf->gpio_3v = *prop;
+	prop = get_property(np, "card-5v-gpio", NULL);
+	cf->gpio_5v = *prop;
+
+	cf->socket.io_offset = cf->io_base;
+
+	/* reserve chip-select regions */
+	if (!request_mem_region(mem.start, mem.end + 1 - mem.start,
+				driver_name)) {
+		status = -ENXIO;
+		dev_err(device, "Can't claim memory region\n");
+		goto fail1;
+	}
+
+	if (!request_region(cf->io_base, cf->io_size, driver_name)) {
+		status = -ENXIO;
+		dev_err(device, "Can't claim I/O region\n");
+		goto fail2;
+	}
+
+	cf->socket.owner = THIS_MODULE;
+	cf->socket.dev.parent = &ofdev->dev;
+	cf->socket.ops = &electra_cf_ops;
+	cf->socket.resource_ops = &pccard_static_ops;
+	cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP |
+				SS_CAP_MEM_ALIGN;
+	cf->socket.map_size = 0x800;
+
+	status = pcmcia_register_socket(&cf->socket);
+	if (status < 0) {
+		dev_err(device, "pcmcia_register_socket failed\n");
+		goto fail3;
+	}
+
+	dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+		 mem.start, io.start, cf->irq);
+
+	cf->active = 1;
+	electra_cf_timer((unsigned long)cf);
+	return 0;
+
+fail3:
+	release_mem_region(io.start, io.end + 1 - io.start);
+fail2:
+	release_mem_region(mem.start, mem.end + 1 - mem.start);
+fail1:
+	/* XXX No way to undo the io reservation at this time */
+	if (cf->mem_base)
+		iounmap(cf->mem_base);
+	if (cf->gpio_base)
+		iounmap(cf->gpio_base);
+	device_init_wakeup(&ofdev->dev, 0);
+	kfree(cf);
+	return status;
+
+}
+
+static int __devexit electra_cf_remove(struct of_device *ofdev)
+{
+	struct device *device = &ofdev->dev;
+	struct electra_cf_socket *cf;
+
+	cf = dev_get_drvdata(device);
+
+	cf->active = 0;
+	pcmcia_unregister_socket(&cf->socket);
+	free_irq(cf->irq, cf);
+	del_timer_sync(&cf->timer);
+
+	iounmap(cf->mem_base);
+	iounmap(cf->gpio_base);
+	release_mem_region(cf->mem_phys, cf->mem_size);
+	release_region(cf->io_base, cf->io_size);
+
+	kfree(cf);
+
+	return 0;
+}
+
+static int bus_notify(struct notifier_block *nb, unsigned long action,
+		      void *data)
+{
+	struct device *dev = data;
+
+	printk("bus notify called\n");
+
+	/* We are only intereted in device addition */
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return 0;
+
+	/* We use the direct ops for localbus */
+	dev->archdata.dma_ops = &dma_direct_ops;
+
+	return 0;
+}
+
+static struct notifier_block bus_notifier = {
+	.notifier_call = bus_notify,
+};
+
+static struct of_device_id electra_cf_match[] =
+{
+	{
+		.compatible   = "electra-cf",
+	},
+	{},
+};
+
+static struct of_platform_driver electra_cf_driver =
+{
+	.name	   = (char *)driver_name,
+	.match_table    = electra_cf_match,
+	.probe	  = electra_cf_probe,
+	.remove   = electra_cf_remove,
+};
+
+static int __init electra_cf_init(void)
+{
+	bus_register_notifier(&pcmcia_bus_type, &bus_notifier);
+	return of_register_platform_driver(&electra_cf_driver);
+}
+module_init(electra_cf_init);
+
+static void __exit electra_cf_exit(void)
+{
+	bus_unregister_notifier(&pcmcia_bus_type, &bus_notifier);
+	of_unregister_platform_driver(&electra_cf_driver);
+}
+module_exit(electra_cf_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Olof Johansson <olof@...om.net>");
+MODULE_DESCRIPTION("PA Semi Electra CF driver");
+
Index: powerpc/arch/powerpc/platforms/pasemi/setup.c
===================================================================
--- powerpc.orig/arch/powerpc/platforms/pasemi/setup.c
+++ powerpc/arch/powerpc/platforms/pasemi/setup.c
@@ -205,6 +205,7 @@ static void __init pas_init_early(void)
 }
 
 static struct of_device_id pasemi_bus_ids[] = {
+	{ .type = "localbus", },
 	{ .type = "sdc", },
 	{},
 };
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ