| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.0705152313490.5832@schroedinger.engr.sgi.com>
Date: Tue, 15 May 2007 23:15:24 -0700 (PDT)
From: Christoph Lameter <clameter@....com>
To: akpm@...ux-foundation.org
cc: linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: Slab allocators: Define common size limitations
Currently we have a maze of configuration variables that determine
the maximum slab size. Worst of all it seems to vary between SLAB and SLUB.
So define a common maximum size for kmalloc. For conveniences sake
we use the maximum size ever supported which is 32 MB. We limit the maximum
size to a lower limit if MAX_ORDER does not allow such large allocations.
For many architectures this patch will have the effect of adding large
kmalloc sizes. x86_64 adds 5 new kmalloc sizes. So a small amount
of memory will be needed for these caches (contemporary SLAB has dynamically
sizeable node and cpu structure so the waste is less than in the past)
Most architectures will then be able to allocate object with sizes up to
MAX_ORDER. We have had repeated breakage (in fact whenever we doubled the
number of supported processors) on IA64 because one or the other struct
grew beyond what the slab allocators supported. This will avoid future
issues and f.e. avoid fixes for 2k and 4k cpu support.
CONFIG_LARGE_ALLOCS is no longer necessary so drop it.
Signed-off-by: Christoph Lameter <clameter@....com>
---
arch/blackfin/Kconfig | 8 --------
arch/frv/Kconfig | 8 --------
arch/m68knommu/Kconfig | 8 --------
arch/v850/Kconfig | 8 --------
include/linux/kmalloc_sizes.h | 20 +++++++++++++++-----
include/linux/slab.h | 15 +++++++++++++++
include/linux/slub_def.h | 19 ++-----------------
mm/slab.c | 19 ++-----------------
8 files changed, 34 insertions(+), 71 deletions(-)
Index: slub/include/linux/slab.h
===================================================================
--- slub.orig/include/linux/slab.h 2007-05-15 21:17:15.000000000 -0700
+++ slub/include/linux/slab.h 2007-05-15 21:19:51.000000000 -0700
@@ -74,6 +74,21 @@ static inline void *kmem_cache_alloc_nod
#endif
/*
+ * The largest kmalloc size supported by the slab allocators is
+ * 32 megabyte (2^25) or the maximum allocatable page order if that is
+ * less than 32 MB.
+ *
+ * WARNING: Its not easy to increase this value since the allocators have
+ * to do various tricks to work around compiler limitations in order to
+ * ensure proper constant folding.
+ */
+#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) <= 25 ? \
+ (MAX_ORDER + PAGE_SHIFT) : 25)
+
+#define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH)
+#define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
+
+/*
* Common kmalloc functions provided by all allocators
*/
void *__kmalloc(size_t, gfp_t);
Index: slub/include/linux/slub_def.h
===================================================================
--- slub.orig/include/linux/slub_def.h 2007-05-15 21:17:15.000000000 -0700
+++ slub/include/linux/slub_def.h 2007-05-15 21:21:27.000000000 -0700
@@ -58,17 +58,6 @@ struct kmem_cache {
*/
#define KMALLOC_SHIFT_LOW 3
-#ifdef CONFIG_LARGE_ALLOCS
-#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) =< 25 ? \
- (MAX_ORDER + PAGE_SHIFT - 1) : 25)
-#else
-#if !defined(CONFIG_MMU) || NR_CPUS > 512 || MAX_NUMNODES > 256
-#define KMALLOC_SHIFT_HIGH 20
-#else
-#define KMALLOC_SHIFT_HIGH 18
-#endif
-#endif
-
/*
* We keep the general caches in an array of slab caches that are used for
* 2^x bytes of allocations.
@@ -79,7 +68,7 @@ extern struct kmem_cache kmalloc_caches[
* Sorry that the following has to be that ugly but some versions of GCC
* have trouble with constant propagation and loops.
*/
-static inline int kmalloc_index(int size)
+static inline int kmalloc_index(size_t size)
{
/*
* We should return 0 if size == 0 but we use the smallest object
@@ -87,7 +76,7 @@ static inline int kmalloc_index(int size
*/
WARN_ON_ONCE(size == 0);
- if (size > (1 << KMALLOC_SHIFT_HIGH))
+ if (size > KMALLOC_MAX_SIZE)
return -1;
if (size > 64 && size <= 96)
@@ -110,17 +99,13 @@ static inline int kmalloc_index(int size
if (size <= 64 * 1024) return 16;
if (size <= 128 * 1024) return 17;
if (size <= 256 * 1024) return 18;
-#if KMALLOC_SHIFT_HIGH > 18
if (size <= 512 * 1024) return 19;
if (size <= 1024 * 1024) return 20;
-#endif
-#if KMALLOC_SHIFT_HIGH > 20
if (size <= 2 * 1024 * 1024) return 21;
if (size <= 4 * 1024 * 1024) return 22;
if (size <= 8 * 1024 * 1024) return 23;
if (size <= 16 * 1024 * 1024) return 24;
if (size <= 32 * 1024 * 1024) return 25;
-#endif
return -1;
/*
Index: slub/include/linux/kmalloc_sizes.h
===================================================================
--- slub.orig/include/linux/kmalloc_sizes.h 2007-05-12 18:45:56.000000000 -0700
+++ slub/include/linux/kmalloc_sizes.h 2007-05-15 21:19:51.000000000 -0700
@@ -19,17 +19,27 @@
CACHE(32768)
CACHE(65536)
CACHE(131072)
-#if (NR_CPUS > 512) || (MAX_NUMNODES > 256) || !defined(CONFIG_MMU)
+#if KMALLOC_MAX_SIZE >= 262144
CACHE(262144)
#endif
-#ifndef CONFIG_MMU
+#if KMALLOC_MAX_SIZE >= 524288
CACHE(524288)
+#endif
+#if KMALLOC_MAX_SIZE >= 1048576
CACHE(1048576)
-#ifdef CONFIG_LARGE_ALLOCS
+#endif
+#if KMALLOC_MAX_SIZE >= 2097152
CACHE(2097152)
+#endif
+#if KMALLOC_MAX_SIZE >= 4194304
CACHE(4194304)
+#endif
+#if KMALLOC_MAX_SIZE >= 8388608
CACHE(8388608)
+#endif
+#if KMALLOC_MAX_SIZE >= 16777216
CACHE(16777216)
+#endif
+#if KMALLOC_MAX_SIZE >= 33554432
CACHE(33554432)
-#endif /* CONFIG_LARGE_ALLOCS */
-#endif /* CONFIG_MMU */
+#endif
Index: slub/mm/slab.c
===================================================================
--- slub.orig/mm/slab.c 2007-05-15 21:17:15.000000000 -0700
+++ slub/mm/slab.c 2007-05-15 21:19:51.000000000 -0700
@@ -569,21 +569,6 @@ static void **dbg_userword(struct kmem_c
#endif
/*
- * Maximum size of an obj (in 2^order pages) and absolute limit for the gfp
- * order.
- */
-#if defined(CONFIG_LARGE_ALLOCS)
-#define MAX_OBJ_ORDER 13 /* up to 32Mb */
-#define MAX_GFP_ORDER 13 /* up to 32Mb */
-#elif defined(CONFIG_MMU)
-#define MAX_OBJ_ORDER 5 /* 32 pages */
-#define MAX_GFP_ORDER 5 /* 32 pages */
-#else
-#define MAX_OBJ_ORDER 8 /* up to 1Mb */
-#define MAX_GFP_ORDER 8 /* up to 1Mb */
-#endif
-
-/*
* Do not go above this order unless 0 objects fit into the slab.
*/
#define BREAK_GFP_ORDER_HI 1
@@ -2004,7 +1989,7 @@ static size_t calculate_slab_order(struc
size_t left_over = 0;
int gfporder;
- for (gfporder = 0; gfporder <= MAX_GFP_ORDER; gfporder++) {
+ for (gfporder = 0; gfporder <= KMALLOC_MAX_ORDER; gfporder++) {
unsigned int num;
size_t remainder;
@@ -2150,7 +2135,7 @@ kmem_cache_create (const char *name, siz
* Sanity checks... these are all serious usage bugs.
*/
if (!name || in_interrupt() || (size < BYTES_PER_WORD) ||
- (size > (1 << MAX_OBJ_ORDER) * PAGE_SIZE) || dtor) {
+ size > KMALLOC_MAX_SIZE || dtor) {
printk(KERN_ERR "%s: Early error in slab %s\n", __FUNCTION__,
name);
BUG();
Index: slub/arch/blackfin/Kconfig
===================================================================
--- slub.orig/arch/blackfin/Kconfig 2007-05-12 18:45:56.000000000 -0700
+++ slub/arch/blackfin/Kconfig 2007-05-15 21:19:51.000000000 -0700
@@ -560,14 +560,6 @@ endchoice
source "mm/Kconfig"
-config LARGE_ALLOCS
- bool "Allow allocating large blocks (> 1MB) of memory"
- help
- Allow the slab memory allocator to keep chains for very large
- memory sizes - upto 32MB. You may need this if your system has
- a lot of RAM, and you need to able to allocate very large
- contiguous chunks. If unsure, say N.
-
config BFIN_DMA_5XX
bool "Enable DMA Support"
depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
Index: slub/arch/frv/Kconfig
===================================================================
--- slub.orig/arch/frv/Kconfig 2007-05-12 18:45:56.000000000 -0700
+++ slub/arch/frv/Kconfig 2007-05-15 21:19:51.000000000 -0700
@@ -102,14 +102,6 @@ config HIGHPTE
with a lot of RAM, this can be wasteful of precious low memory.
Setting this option will put user-space page tables in high memory.
-config LARGE_ALLOCS
- bool "Allow allocating large blocks (> 1MB) of memory"
- help
- Allow the slab memory allocator to keep chains for very large memory
- sizes - up to 32MB. You may need this if your system has a lot of
- RAM, and you need to able to allocate very large contiguous chunks.
- If unsure, say N.
-
source "mm/Kconfig"
choice
Index: slub/arch/m68knommu/Kconfig
===================================================================
--- slub.orig/arch/m68knommu/Kconfig 2007-05-12 18:45:56.000000000 -0700
+++ slub/arch/m68knommu/Kconfig 2007-05-15 21:19:51.000000000 -0700
@@ -470,14 +470,6 @@ config AVNET
default y
depends on (AVNET5282)
-config LARGE_ALLOCS
- bool "Allow allocating large blocks (> 1MB) of memory"
- help
- Allow the slab memory allocator to keep chains for very large
- memory sizes - upto 32MB. You may need this if your system has
- a lot of RAM, and you need to able to allocate very large
- contiguous chunks. If unsure, say N.
-
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
default y
Index: slub/arch/v850/Kconfig
===================================================================
--- slub.orig/arch/v850/Kconfig 2007-05-12 18:45:56.000000000 -0700
+++ slub/arch/v850/Kconfig 2007-05-15 21:19:51.000000000 -0700
@@ -240,14 +240,6 @@ menu "Processor type and features"
config RESET_GUARD
bool "Reset Guard"
- config LARGE_ALLOCS
- bool "Allow allocating large blocks (> 1MB) of memory"
- help
- Allow the slab memory allocator to keep chains for very large
- memory sizes - upto 32MB. You may need this if your system has
- a lot of RAM, and you need to able to allocate very large
- contiguous chunks. If unsure, say N.
-
source "mm/Kconfig"
endmenu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists