Linux version 2.6.22-rc1-gd3a36fb8 (jgarzik@core.yyz.us) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri May 18 00:16:01 EDT 2007 Command line: ro root=LABEL=/ nogui BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ed50000 (usable) BIOS-e820: 000000007ed50000 - 000000007ee22000 (ACPI NVS) BIOS-e820: 000000007ee22000 - 000000007fea2000 (usable) BIOS-e820: 000000007fea2000 - 000000007fee9000 (ACPI NVS) BIOS-e820: 000000007fee9000 - 000000007feed000 (usable) BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data) BIOS-e820: 000000007feff000 - 000000007ff00000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 519504) 1 entries of 256 used Entering add_active_range(0, 519714, 523938) 2 entries of 256 used Entering add_active_range(0, 524009, 524013) 3 entries of 256 used Entering add_active_range(0, 524031, 524032) 4 entries of 256 used end_pfn_map = 524032 DMI 2.3 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7FEFDE48, 0050 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: FACP 7FEFCF10, 0074 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: DSDT 7FEF8010, 3E70 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: FACS 7FEDFC40, 0040 ACPI: APIC 7FEFCE10, 0078 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: WDDT 7FEF7F90, 0040 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: MCFG 7FEF7F10, 003C (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: ASF! 7FEFCD10, 00A6 (r32 INTEL D975XBX 4B9 MSFT 1000013) ACPI: HPET 7FEF7E90, 0038 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: SSDT 7FEFDC10, 01BC (r1 INTEL CpuPm 4B9 MSFT 1000013) ACPI: SSDT 7FEFDA10, 01B7 (r1 INTEL Cpu0Ist 4B9 MSFT 1000013) ACPI: SSDT 7FEFD810, 01B7 (r1 INTEL Cpu1Ist 4B9 MSFT 1000013) ACPI: SSDT 7FEFD610, 01B7 (r1 INTEL Cpu2Ist 4B9 MSFT 1000013) ACPI: SSDT 7FEFD410, 01B7 (r1 INTEL Cpu3Ist 4B9 MSFT 1000013) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 519504) 1 entries of 256 used Entering add_active_range(0, 519714, 523938) 2 entries of 256 used Entering add_active_range(0, 524009, 524013) 3 entries of 256 used Entering add_active_range(0, 524031, 524032) 4 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[5] active PFN ranges 0: 0 -> 159 0: 256 -> 519504 0: 519714 -> 523938 0: 524009 -> 524013 0: 524031 -> 524032 On node 0 totalpages: 523636 DMA zone: 56 pages used for memmap DMA zone: 961 pages reserved DMA zone: 2982 pages, LIFO batch:0 DMA32 zone: 7108 pages used for memmap DMA32 zone: 512529 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:80100000) PERCPU: Allocating 33544 bytes of per cpu data Built 1 zonelists. Total pages: 515511 Kernel command line: ro root=LABEL=/ nogui Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2933.327 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2056572k/2096128k available (2231k kernel code, 37296k reserved, 876k data, 232k init) Calibrating delay using timer specific routine.. 5870.58 BogoMIPS (lpj=11741168) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) Freeing SMP alternatives: 24k freed ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16666628 Detected 16.666 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5866.77 BogoMIPS (lpj=11733555) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=22 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report BUG: at mm/slab.c:777 __find_general_cachep() Call Trace: [] __kmalloc+0xa7/0xe0 [] cache_k8_northbridges+0x9d/0x120 [] gart_iommu_init+0x33/0x5b0 [] __wake_up+0x43/0x70 [] genl_rcv+0x0/0x70 [] netlink_kernel_create+0x158/0x170 [] genl_unlock+0x10/0x50 [] pci_iommu_init+0x9/0x20 [] kernel_init+0x154/0x330 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x7c [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: 90300000-903fffff PREFETCH window: 80000000-8fffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 90200000-902fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: 2000-2fff MEM window: 90100000-901fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: 90000000-900fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 Time: tsc clocksource has been installed. IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1532k freed IA-32 Microcode Update Driver: v1.14a audit: initializing netlink socket (disabled) audit(1179463017.492:1): initialized Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input2 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 16 09:45:46 2007 UTC). ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 1 Freeing unused kernel memory: 232k freed Write protecting the kernel read-only data: 2868k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90404400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.20 loaded. ahci 0000:00:1f.2: version 2.1 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 usb 1-1: device not accepting address 2, error -71 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc2000001a100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata2: SATA max UDMA/133 cmd 0xffffc2000001a180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata3: SATA max UDMA/133 cmd 0xffffc2000001a200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata4: SATA max UDMA/133 cmd 0xffffc2000001a280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 usb 1-1: new low speed USB device using uhci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 321672960, hpa_sectors = 321672960 ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ata_hpa_resize 1: sectors = 321672960, hpa_sectors = 321672960 ata1.00: configured for UDMA/133 usb 1-2: new low speed USB device using uhci_hcd and address 5 usb 1-2: configuration #1 chosen from 1 choice input: Microsoft Natural Keyboard Elite as /class/input/input4 input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Elite] on usb-0000:00:1d.0-2 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ata_hpa_resize 1: sectors = 321672960, hpa_sectors = 321672960 ata2.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata2.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: ata_hpa_resize 1: sectors = 321672960, hpa_sectors = 321672960 ata2.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI, max UDMA/66 ata4.00: configured for UDMA/66 scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 321672960 512-byte hardware sectors (164697 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 321672960 512-byte hardware sectors (164697 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk scsi 3:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.03 PQ: 0 ANSI: 5 sata_sil 0000:05:05.0: version 2.2 ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 17 sata_sil 0000:05:05.0: Applying R_ERR on DMA activate FIS errata fix scsi4 : sata_sil scsi5 : sata_sil scsi6 : sata_sil scsi7 : sata_sil ata5: SATA max UDMA/100 cmd 0xffffc2000001c880 ctl 0xffffc2000001c88a bmdma 0xffffc2000001c800 irq 0 ata6: SATA max UDMA/100 cmd 0xffffc2000001c8c0 ctl 0xffffc2000001c8ca bmdma 0xffffc2000001c808 irq 0 ata7: SATA max UDMA/100 cmd 0xffffc2000001ca80 ctl 0xffffc2000001ca8a bmdma 0xffffc2000001ca00 irq 0 ata8: SATA max UDMA/100 cmd 0xffffc2000001cac0 ctl 0xffffc2000001caca bmdma 0xffffc2000001ca08 irq 0 ata5: SATA link down (SStatus 0 SControl 310) ata6: SATA link down (SStatus 0 SControl 310) ata7: SATA link down (SStatus 0 SControl 310) ata8: SATA link down (SStatus 0 SControl 310) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 18 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sr 3:0:0:0: Attached scsi generic sg2 type 5 fw_ohci: Added fw-ohci device 0000:05:04.0, OHCI version 1.10 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ata_piix 0000:00:1f.1: version 2.11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi8 : ata_piix scsi9 : ata_piix ata9: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000140b0 irq 14 ata10: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000140b8 irq 15 ata10: port disabled. ignoring. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:ab:3c:ba e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 fw_core: created new fw device fw0 (0 config rom retries) ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 Non-volatile memory driver v1.2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4096564k swap on /dev/sda3. Priority:-1 extents:1 across:4096564k Adding 4096532k swap on /dev/sdb1. Priority:-2 extents:1 across:4096532k NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready