Linux version 2.6.22-rc1-git5 (root@localhost.localdomain) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #5 SMP Thu May 17 21:23:42 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff60000 (usable) BIOS-e820: 000000007ff60000 - 000000007ff77000 (ACPI data) BIOS-e820: 000000007ff77000 - 000000007ff79000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 524128) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524128 early_node_map[1] active PFN ranges 0: 0 -> 524128 On node 0 totalpages: 524128 DMA zone: 40 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4056 pages, LIFO batch:0 Normal zone: 2200 pages used for memmap Normal zone: 223080 pages, LIFO batch:31 HighMem zone: 2878 pages used for memmap HighMem zone: 291874 pages, LIFO batch:31 DMI present. Using APIC driver default ACPI: RSDP 000F6D70, 0024 (r2 IBM ) ACPI: XSDT 7FF6A6BD, 004C (r1 IBM TP-1R 3210 LTP 0) ACPI: FACP 7FF6A800, 00F4 (r3 IBM TP-1R 3210 IBM 1) ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT 7FF6A9E7, C4E5 (r1 IBM TP-1R 3210 MSFT 100000E) ACPI: FACS 7FF78000, 0040 ACPI: SSDT 7FF6A9B4, 0033 (r1 IBM TP-1R 3210 MSFT 100000E) ACPI: ECDT 7FF76ECC, 0052 (r1 IBM TP-1R 3210 IBM 1) ACPI: TCPA 7FF76F1E, 0032 (r1 IBM TP-1R 3210 PTL 1) ACPI: BOOT 7FF76FD8, 0028 (r1 IBM TP-1R 3210 LTP 1) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 88000000 (gap: 80000000:7f800000) Built 1 zonelists. Total pages: 519010 Kernel command line: ro root=LABEL=/ rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0241d000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c078b000 soft=c076b000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 599.504 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2066148k/2096512k available (2092k kernel code, 29176k reserved, 1110k data, 260k init, 1179008k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0725000 - 0xc0766000 ( 260 kB) .data : 0xc060b1f2 - 0xc0720d94 (1110 kB) .text : 0xc0400000 - 0xc060b1f2 (2092 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1199.80 BogoMIPS (lpj=599903) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0800) CPU0: Intel(R) Pentium(R) M processor 1700MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs PM: Adding info for No Bus:platform Time: 19:02:35 Date: 04/21/107 NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing PM: Adding info for acpi:acpi_system:00 PM: Adding info for acpi:button_power:00 PM: Adding info for acpi:ACPI0007:00 PM: Adding info for acpi:device:00 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:PNP0C0D:00 PM: Adding info for acpi:PNP0C0E:00 PM: Adding info for acpi:PNP0A03:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0303:00 PM: Adding info for acpi:IBM0057:00 PM: Adding info for acpi:PNP0700:00 PM: Adding info for acpi:device:02 PM: Adding info for acpi:PNP0501:00 PM: Adding info for acpi:PNP0400:00 PM: Adding info for acpi:IBM0071:00 PM: Adding info for acpi:PNP0C09:00 PM: Adding info for acpi:power_resource:00 PM: Adding info for acpi:PNP0C0A:00 PM: Adding info for acpi:ACPI0003:00 PM: Adding info for acpi:IBM0068:00 PM: Adding info for acpi:device:03 PM: Adding info for acpi:video:00 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:device:09 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:bay:00 PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:thermal:00 PM: Adding info for acpi:thermal:01 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:00:1f.5 PM: Adding info for pci:0000:00:1f.6 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:02:00.0 PM: Adding info for pci:0000:02:00.1 PM: Adding info for pci:0000:02:01.0 PM: Adding info for pci:0000:02:02.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a PM: Adding info for pnp:00:0b PM: Adding info for pnp:00:0c pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved Time: tsc clocksource has been installed. PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PM: Adding info for No Bus:oldmem PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: c0100000-c01fffff PREFETCH window: e0000000-e7ffffff PCI: Bus 3, cardbus bridge: 0000:02:00.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: e8000000-ebffffff MEM window: c4000000-c7ffffff PCI: Bus 7, cardbus bridge: 0000:02:00.1 IO window: 00004800-000048ff IO window: 00004c00-00004cff PREFETCH window: ec000000-efffffff MEM window: c8000000-cbffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-8fff MEM window: c0200000-cfffffff PREFETCH window: e8000000-efffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3466k freed Simple Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. PM: Adding info for platform:pcspkr PM: Adding info for No Bus:snapshot audit: initializing netlink socket (disabled) audit(1179774155.177:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU] (supports 8 throttling states) Marking TSC unstable due to: possible TSC halt in C2. ACPI: Thermal Zone [THM0] (46 C) PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... Time: acpi_pm clocksource has been installed. isapnp: No Plug & Play device found PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12ac PM: Adding info for No Bus:hpet PM: Adding info for No Bus:nvram Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. PM: Adding info for No Bus:agpgart agpgart: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 pnp: Device 00:0a activated. PM: Removing info for No Bus:ttyS0 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A PM: Adding info for No Bus:ttyS0 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt for device 0000:00:1f.6 disabled PM: Adding info for No Bus:isa RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize PM: Adding info for No Bus:lo input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000086 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff PM: Adding info for No Bus:pcmcia_socket0 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000086 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff PM: Adding info for No Bus:pcmcia_socket1 usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 7:548:41 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 260k freed Write protecting the kernel text: 2096k Write protecting the kernel read-only data: 850k PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 PM: Adding info for serio:serio2 PM: Adding info for No Bus:usbdev4.1_ep81 SCSI subsystem initialized libata version 2.20 loaded. ata_piix 0000:00:1f.1: version 2.11 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix PM: Adding info for No Bus:host0 scsi1 : ata_piix PM: Adding info for No Bus:host1 ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 ata1: soft resetting port ata1: reset complete ata1.00: issuing IDENTIFY ata1.00: IDENTIFY complete ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240 ata1.00: ATA-6: HTS726060M9AT00, MH4OA6DA, max UDMA/100 ata1.00: 117210240 sectors, multi 16: LBA ata1.00: issuing IDENTIFY ata1.00: IDENTIFY complete ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240 ata1.00: configured for UDMA/100 ata1: EH complete ata2: soft resetting port ata2: reset complete ata2.00: issuing IDENTIFY ata2.00: IDENTIFY complete ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata2.00: ATA-6: HTS548080M9AT00, MG4OA5HA, max UDMA/100 ata2.00: 156301488 sectors, multi 16: LBA ata2.00: issuing IDENTIFY ata2.00: IDENTIFY complete ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata2.00: configured for UDMA/100 ata2: EH complete PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>usb 2-2: new full speed USB device using uhci_hcd and address 3 PM: Adding info for usb:2-2 PM: Adding info for No Bus:usbdev2.3_ep00 usb 2-2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-2:1.0 PM: Adding info for No Bus:usbdev2.3_ep82 PM: Adding info for No Bus:usbdev2.3_ep01 libusual: modprobe for usb-storage succeeded, but module is not present sda1 sd 0:0:0:0: [sda] Attached SCSI disk PM: Adding info for No Bus:target1:0:0 scsi 1:0:0:0: Direct-Access ATA HTS548080M9AT00 MG4O PQ: 0 ANSI: 5 PM: Adding info for scsi:1:0:0:0 sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk PM: Adding info for No Bus:device-mapper device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1179774162.345:2): selinux=0 auid=4294967295 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input3 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 Floppy drive(s): fd0 is 1.44M cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7:<6>FDC 0 is a National Semiconductor PC87306 clean. cs: IO port probe 0xa00-0xaff:<7>PM: Adding info for platform:floppy.0 clean. cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. iTCO_vendor_support: vendor-support=0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PM: Adding info for No Bus:i2c-0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) PM: Adding info for platform:iTCO_wdt iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) PM: Adding info for No Bus:watchdog iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) intel_rng: FWH not detected PM: Adding info for No Bus:timer PM: Adding info for No Bus:seq PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.6 to 64 PM: Adding info for No Bus:pcmC1D0p PM: Adding info for No Bus:pcmC1D0c PM: Adding info for No Bus:dsp1 PM: Adding info for No Bus:audio1 PM: Adding info for ac97:1-1:Si3036,8 PM: Adding info for No Bus:controlC1 PM: Adding info for No Bus:mixer1 NET: Registered protocol family 23 pnp: Device 00:0c activated. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) PM: Adding info for No Bus:irda0 IrDA: Registered device irda0 nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 PM: Adding info for platform:nsc-ircc.0 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:2b:ab:92 PM: Adding info for No Bus:eth0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] PM: Adding info for platform:parport_pc.956 PM: Removing info for platform:parport_pc.956 PM: Adding info for platform:parport_pc.888 PM: Removing info for platform:parport_pc.888 PM: Adding info for platform:parport_pc.632 PM: Removing info for platform:parport_pc.632 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50315 usecs intel8x0: clocking to 48000 PM: Adding info for No Bus:pcmC0D4p PM: Adding info for No Bus:pcmC0D3c PM: Adding info for No Bus:pcmC0D2c PM: Adding info for No Bus:pcmC0D1c PM: Adding info for No Bus:adsp PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for No Bus:dsp PM: Adding info for No Bus:audio PM: Adding info for ac97:0-0:AD1981B PM: Adding info for No Bus:controlC0 PM: Adding info for No Bus:mixer loop: module loaded lp0: using parport0 (interrupt-driven). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.27.0 20060524 on minor 0 Clocksource tsc unstable (delta = -175488522 ns) ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) PM: Adding info for platform:dock.0 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler PM: Adding info for platform:bay.0 ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:microcode PM: Adding info for platform:microcode PM: Adding info for No Bus:microcode PM: Removing info for No Bus:microcode IA-32 Microcode Update Driver: v1.14a PM: Removing info for No Bus:microcode PM: Removing info for platform:microcode ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) Bluetooth: Core ver 2.11 PM: Adding info for platform:bluetooth NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized usb 2-2: USB disconnect, address 3 PM: Removing info for No Bus:usbdev2.3_ep82 PM: Removing info for No Bus:usbdev2.3_ep01 PM: Removing info for usb:2-2:1.0 PM: Removing info for No Bus:usbdev2.3_ep00 PM: Removing info for usb:2-2 usb 2-2: new full speed USB device using uhci_hcd and address 4 PM: Adding info for usb:2-2 PM: Adding info for No Bus:usbdev2.4_ep00 usb 2-2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-2:1.0 PM: Adding info for No Bus:usbdev2.4_ep82 PM: Adding info for No Bus:usbdev2.4_ep01 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices PM: Adding info for No Bus:host2 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 usb-storage: device scan complete PM: Adding info for No Bus:target2:0:0 scsi 2:0:0:0: Direct-Access IBM Memory Key 3.52 PQ: 0 ANSI: 0 CCS PM: Adding info for No Bus:target2:0:1 PM: Removing info for No Bus:target2:0:1 PM: Adding info for No Bus:target2:0:2 PM: Removing info for No Bus:target2:0:2 PM: Adding info for No Bus:target2:0:3 PM: Removing info for No Bus:target2:0:3 PM: Adding info for No Bus:target2:0:4 PM: Removing info for No Bus:target2:0:4 PM: Adding info for No Bus:target2:0:5 PM: Removing info for No Bus:target2:0:5 PM: Adding info for No Bus:target2:0:6 PM: Removing info for No Bus:target2:0:6 PM: Adding info for No Bus:target2:0:7 PM: Removing info for No Bus:target2:0:7 PM: Adding info for scsi:2:0:0:0 sd 2:0:0:0: [sdc] 499712 512-byte hardware sectors (256 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 45 00 00 08 sd 2:0:0:0: [sdc] Assuming drive cache: write through sd 2:0:0:0: [sdc] 499712 512-byte hardware sectors (256 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 45 00 00 08 sd 2:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 2 usecs