[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <CEAADB30-FB4E-4F2B-BBF9-DD085FBF9B55@usit.uio.no>
Date: Mon, 21 May 2007 22:00:43 +0200
From: Hans A Eide <h.a.eide@...t.uio.no>
To: linux-kernel@...r.kernel.org
Cc: linux-scsi@...r.kernel.org
Subject: Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4,
> Evan Harris wrote:
>>
>> I have a card that mirrors this one from your list:
>>
>> Retail name: SATA300 TX4
>> Chip label: PDC40718-GP SATAII300
>> Vendor-Device number: 105a:3d17 (rev 02)
>>
>> Through testing, I've found linux 2.6.16 and 2.6.17 find the
ports in
>> this order (the list is ordered by linux detection):
>>
>> 1. silkscreen port 3
>> 2. silkscreen port 2
>> 3. silkscreen port 4
>> 4. silkscreen port 1
>>> NOTE: the patch I have submitted (
>>> http://marc.theaimsgroup.com/?l=linux-
ide&m=114082978311290&w=2 ) is a
>>> solution that doesn't know about the older Promise SATA
controllers,
>>> which are not affected with the "new wiring" problem, so the older
>>> controllers will appear screwed if you use it.
>>>
>>> Hopefully we will collect enough info about all the SATA Promise
>>> controllers to distinguish the new and the old wiring controllers,
>>> then produce a new patch that will be a correct solution to the
"new
>>> wiring" problem.
>
> Mikael Pettersson has been doing some excellent work recently on
> sata_promise. If enough data has been collected on this sata_promise
> port enumeration problem, maybe the data could be collated and
proposed
> via Mikael as a patch?
>
> Jeff
Sorry, any updates on this?
An updated patch for "new wiring" would be
--- sata_promise.c 2007-05-20 21:35:54.000000000 +0200
+++ sata_promise.c.new_enum 2007-05-21 21:52:38.000000000 +0200
@@ -915,9 +915,11 @@
hp->flags |= PDC_FLAG_GEN_II;
/* Fall through */
case board_20319:
- probe_ent->n_ports = 4;
- pdc_ata_setup_port(&probe_ent->port[2], base + 0x300,
base + 0x600);
- pdc_ata_setup_port(&probe_ent->port[3], base + 0x380,
base + 0x700);
+ probe_ent->n_ports = 4;
+ pdc_ata_setup_port(&probe_ent->port[0], base + 0x380,
base + 0x400);
+ pdc_ata_setup_port(&probe_ent->port[1], base + 0x280,
base + 0x500);
+ pdc_ata_setup_port(&probe_ent->port[2], base + 0x200,
base + 0x600);
+ pdc_ata_setup_port(&probe_ent->port[3], base + 0x300,
base + 0x700);
break;
case board_2057x:
hp->flags |= PDC_FLAG_GEN_II;
Correct?
Hans
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists