| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070522003006.GA30994@havoc.gtf.org>
Date: Mon, 21 May 2007 20:30:06 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes and administrivia
Two fixes; the rest is trivial pre-release administrivia (ie. only bump
versions and chomp whitespace after everything else gets merged up)
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci.c | 13 +++++++++++--
drivers/ata/ata_generic.c | 2 +-
drivers/ata/ata_piix.c | 9 +--------
drivers/ata/libata-core.c | 14 ++++++--------
drivers/ata/libata-eh.c | 2 +-
drivers/ata/pata_artop.c | 4 ++--
drivers/ata/pata_cmd640.c | 4 ++--
drivers/ata/pata_cmd64x.c | 2 +-
drivers/ata/pata_cs5520.c | 2 +-
drivers/ata/pata_cs5530.c | 2 +-
drivers/ata/pata_cs5535.c | 2 +-
drivers/ata/pata_cypress.c | 2 +-
drivers/ata/pata_hpt366.c | 28 +---------------------------
drivers/ata/pata_hpt37x.c | 10 +++++-----
drivers/ata/pata_hpt3x3.c | 2 +-
drivers/ata/pata_isapnp.c | 2 +-
drivers/ata/pata_it8213.c | 2 +-
drivers/ata/pata_ixp4xx_cf.c | 2 +-
drivers/ata/pata_jmicron.c | 2 +-
drivers/ata/pata_legacy.c | 2 +-
drivers/ata/pata_platform.c | 2 +-
drivers/ata/pata_qdi.c | 2 +-
drivers/ata/pata_rz1000.c | 2 +-
drivers/ata/pata_sc1200.c | 2 +-
drivers/ata/pata_scc.c | 2 +-
drivers/ata/pata_serverworks.c | 2 +-
drivers/ata/pata_sl82c105.c | 2 +-
drivers/ata/pata_winbond.c | 2 +-
drivers/ata/pdc_adma.c | 2 +-
drivers/ata/sata_inic162x.c | 2 +-
drivers/ata/sata_mv.c | 2 +-
drivers/ata/sata_nv.c | 6 +++---
drivers/ata/sata_qstor.c | 2 +-
drivers/ata/sata_sil.c | 2 +-
drivers/ata/sata_sil24.c | 2 +-
drivers/ata/sata_sis.c | 2 +-
drivers/ata/sata_svw.c | 2 +-
drivers/ata/sata_sx4.c | 2 +-
drivers/ata/sata_uli.c | 2 +-
drivers/ata/sata_via.c | 2 +-
drivers/ata/sata_vsc.c | 2 +-
include/linux/libata.h | 2 --
43 files changed, 65 insertions(+), 93 deletions(-)
Alan Cox (3):
pata_hpt366: Enable bits are unreliable so don't use them
ata_piix: clean up
libata: Kiss post_set_mode goodbye
Dave Jones (1):
libata: Add Seagate STT20000A to DMA blacklist.
Jeff Garzik (2):
libata: Trim trailing whitespace
libata: bump versions
Tejun Heo (1):
ahci: disable 64bit dma on sb600
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ad1f59c..b4a8d60 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -132,7 +132,7 @@ config SATA_SIS
depends on PCI
select PATA_SIS
help
- This option enables support for SiS Serial ATA on
+ This option enables support for SiS Serial ATA on
SiS 964/965/966/180 and Parallel ATA on SiS 180.
The PATA support for SiS 180 requires additionally to
enable the PATA_SIS driver in the config.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e00e1b9..7baeaff 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "ahci"
-#define DRV_VERSION "2.1"
+#define DRV_VERSION "2.2"
enum {
@@ -170,6 +170,7 @@ enum {
AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */
AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */
AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */
+ AHCI_FLAG_32BIT_ONLY = (1 << 28), /* force 32bit */
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
@@ -354,7 +355,8 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci_sb600 */
{
.flags = AHCI_FLAG_COMMON |
- AHCI_FLAG_IGN_SERR_INTERNAL,
+ AHCI_FLAG_IGN_SERR_INTERNAL |
+ AHCI_FLAG_32BIT_ONLY,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
@@ -492,6 +494,13 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+ /* some chips lie about 64bit support */
+ if ((cap & HOST_CAP_64) && (pi->flags & AHCI_FLAG_32BIT_ONLY)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can't do 64bit DMA, forcing 32bit\n");
+ cap &= ~HOST_CAP_64;
+ }
+
/* fixup zero port_map */
if (!port_map) {
port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1;
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index c3d7532..7565f02 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.12"
/*
* A generic parallel ATA driver using libata
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 13b6b1d..0458811 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -155,7 +155,6 @@ struct piix_host_priv {
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
static void piix_pata_error_handler(struct ata_port *ap);
-static void piix_sata_error_handler(struct ata_port *ap);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -364,7 +363,7 @@ static const struct ata_port_operations piix_sata_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = piix_sata_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_handler = ata_interrupt,
@@ -641,12 +640,6 @@ static void piix_pata_error_handler(struct ata_port *ap)
ata_std_postreset);
}
-static void piix_sata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
/**
* piix_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d3ea7f5..a6de57e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -59,7 +59,7 @@
#include "libata.h"
-#define DRV_VERSION "2.20" /* must be exactly four chars */
+#define DRV_VERSION "2.21" /* must be exactly four chars */
/* debounce timing parameters in msecs { interval, duration, timeout } */
@@ -977,7 +977,7 @@ static u64 ata_hpa_resize(struct ata_device *dev)
{
u64 sectors = dev->n_sectors;
u64 hpa_sectors;
-
+
if (ata_id_has_lba48(dev->id))
hpa_sectors = ata_read_native_max_address_ext(dev);
else
@@ -1588,7 +1588,7 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
* Check if the current speed of the device requires IORDY. Used
* by various controllers for chip configuration.
*/
-
+
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
/* Controller doesn't support IORDY. Probably a pointless check
@@ -1611,7 +1611,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
* Compute the highest mode possible if we are not using iordy. Return
* -1 if no iordy mode is available.
*/
-
+
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
/* If we have no drive specific rule, then PIO 2 is non IORDY */
@@ -2663,7 +2663,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
t->active += (t->cycle - (t->active + t->recover)) / 2;
t->recover = t->cycle - t->active;
}
-
+
/* In a few cases quantisation may produce enough errors to
leave t->cycle too low for the sum of active and recovery
if so we must correct this */
@@ -2893,9 +2893,6 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
ap->host->simplex_claimed = ap;
- /* step5: chip specific finalisation */
- if (ap->ops->post_set_mode)
- ap->ops->post_set_mode(ap);
out:
if (rc)
*r_failed_dev = dev;
@@ -3771,6 +3768,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
+ { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 |
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5309c31..d807098 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1009,7 +1009,7 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
sense_buf[0] = 0x70;
sense_buf[2] = qc->result_tf.feature >> 4;
- /* some devices time out if garbage left in tf */
+ /* some devices time out if garbage left in tf */
ata_tf_init(dev, &tf);
memset(cdb, 0, ATAPI_CDB_LEN);
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 9861059..7b4810c 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -99,7 +99,7 @@ static int artop6260_pre_reset(struct ata_port *ap, unsigned long deadline)
*
* Identify the cable type for the ARTOp interface in question
*/
-
+
static int artop6260_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index ed00fa9..31cbf8d 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -107,7 +107,7 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
} else {
/* Save the shared timings for channel, they will be loaded
- by qc_issue_prot. Reloading the setup time is expensive
+ by qc_issue_prot. Reloading the setup time is expensive
so we keep a merged one loaded */
pci_read_config_byte(pdev, ARTIM23, ®);
reg &= 0x3F;
@@ -231,7 +231,7 @@ static void cmd640_hardware_init(struct pci_dev *pdev)
pci_write_config_byte(pdev, CMDTIM, 0);
/* 512 byte bursts (sector) */
pci_write_config_byte(pdev, BRST, 0x40);
- /*
+ /*
* A reporter a long time ago
* Had problems with the data fifo
* So don't run the risk
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 2a79b33..320a5b1 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
/*
* CMD64x specific registers definition.
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 83bcc5b..1aabe15 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cs5520"
-#define DRV_VERSION "0.6.4"
+#define DRV_VERSION "0.6.5"
struct pio_clocks
{
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 1b67923..848f030 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_cs5530"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
static void __iomem *cs5530_port_base(struct ata_port *ap)
{
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index f37d4cd..aa3256f 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -39,7 +39,7 @@
#include <asm/msr.h>
#define DRV_NAME "cs5535"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.12"
/*
* The Geode (Aka Athlon GX now) uses an internal MSR based
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 27b9f29..d41a769 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -18,7 +18,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cypress"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.5"
/* here are the offset definitions for the registers */
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c6c8a8b..0c9cb60 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -220,32 +220,6 @@ static int hpt36x_cable_detect(struct ata_port *ap)
return ATA_CBL_PATA80;
}
-static int hpt36x_pre_reset(struct ata_port *ap, unsigned long deadline)
-{
- static const struct pci_bits hpt36x_enable_bits[] = {
- { 0x50, 1, 0x04, 0x04 },
- { 0x54, 1, 0x04, 0x04 }
- };
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_std_prereset(ap, deadline);
-}
-
-/**
- * hpt36x_error_handler - reset the hpt36x bus
- * @ap: ATA port to reset
- *
- * Perform the reset handling for the 366/368
- */
-
-static void hpt36x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
/**
* hpt366_set_piomode - PIO setup
* @ap: ATA interface
@@ -351,7 +325,7 @@ static struct ata_port_operations hpt366_port_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = hpt36x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = hpt36x_cable_detect,
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 5a0a410..a54c174 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -961,7 +961,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
u8 mcr1;
u32 freq;
int prefer_dpll = 1;
-
+
unsigned long iobase = pci_resource_start(dev, 4);
const struct hpt_chip *chip_table;
@@ -1055,7 +1055,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
*/
pci_write_config_byte(dev, 0x5b, 0x23);
-
+
/*
* HighPoint does this for HPT372A.
* NOTE: This register is only writeable via I/O space.
@@ -1088,7 +1088,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
* Turn the frequency check into a band and then find a timing
* table to match it.
*/
-
+
clock_slot = hpt37x_clock_slot(freq, chip_table->base);
if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) {
/*
@@ -1099,11 +1099,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
*/
unsigned int f_low, f_high;
int adjust;
-
+
clock_slot = 2;
if (port->udma_mask & 0xE0)
clock_slot = 3;
-
+
f_low = (MHz[clock_slot] * chip_table->base) / 192;
f_high = f_low + 2;
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index bbabe79..8ce5e23 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x3"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
/**
* hpt3x3_set_piomode - PIO setup
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index d042efd..1f647b6 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
static struct scsi_host_template isapnp_sht = {
.module = THIS_MODULE,
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index a769952..95b0bb6 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -19,7 +19,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_it8213"
-#define DRV_VERSION "0.0.2"
+#define DRV_VERSION "0.0.3"
/**
* it8213_pre_reset - check for 40/80 pin
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index b994351..8d2bc1e 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,7 +23,7 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "0.1.3"
static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
{
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 8d799e8..2af7ff8 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -19,7 +19,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_jmicron"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.5"
typedef enum {
PORT_PATA0 = 0,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 7070992..edffc25 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -64,7 +64,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.4"
+#define DRV_VERSION "0.5.5"
#define NR_HOST 6
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 1f63848..cbb7866 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -22,7 +22,7 @@
#include <linux/pata_platform.h>
#define DRV_NAME "pata_platform"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "1.0"
static int pio_mask = 1;
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index fb8c9e1..1998c19 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
#define NR_HOST 4 /* Two 6580s */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 2bfd7ef..a3488b4 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -21,7 +21,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_rz1000"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
/**
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 225013e..1233063 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -40,7 +40,7 @@
#include <linux/libata.h>
#define DRV_NAME "sc1200"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.2.5"
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 844e53b..aa138d2 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -43,7 +43,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_scc"
-#define DRV_VERSION "0.1"
+#define DRV_VERSION "0.2"
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index dee6e21..1e8f421 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.1"
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index f48491a..e5aaec4 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
enum {
/*
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index cc4ad27..83abfec 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -16,7 +16,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.2"
+#define DRV_VERSION "0.0.3"
#define NR_HOST 4 /* Two winbond controllers, two channels each */
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 52b6953..f12c2b6 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -44,7 +44,7 @@
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
-#define DRV_VERSION "0.05"
+#define DRV_VERSION "0.06"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index bda5e77..2d80c9d 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -28,7 +28,7 @@
#include <scsi/scsi_device.h>
#define DRV_NAME "sata_inic162x"
-#define DRV_VERSION "0.1"
+#define DRV_VERSION "0.2"
enum {
MMIO_BAR = 5,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cb9b9ac..705a020 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "0.81"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 1a49c77..adfa693 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -49,7 +49,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "3.3"
+#define DRV_VERSION "3.4"
#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
@@ -802,7 +802,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
u16 status;
u32 gen_ctl;
u32 notifier, notifier_error;
-
+
/* if ADMA is disabled, use standard ata interrupt handler */
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
@@ -963,7 +963,7 @@ static void nv_adma_irq_clear(struct ata_port *ap)
/* clear ADMA status */
writew(0xffff, mmio + NV_ADMA_STAT);
-
+
/* clear notifiers - note both ports need to be written with
something even though we are only clearing on one */
if (ap->port_no == 0) {
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index f5a05de..6688ccb 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -39,7 +39,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_qstor"
-#define DRV_VERSION "0.07"
+#define DRV_VERSION "0.08"
enum {
QS_MMIO_BAR = 4,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index e8483aa..a3b339b 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -305,7 +305,7 @@ static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
u32 tmp, dev_mode[2];
unsigned int i;
int rc;
-
+
rc = ata_do_set_mode(ap, r_failed);
if (rc)
return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 0cb6618..0ddfae9 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -30,7 +30,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil24"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "0.9"
/*
* Port request block (PRB) 32 bytes
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index ee66c5f..51d9251 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -43,7 +43,7 @@
#include "sis.h"
#define DRV_NAME "sata_sis"
-#define DRV_VERSION "0.7"
+#define DRV_VERSION "0.8"
enum {
sis_180 = 0,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 1724673..bcb2cd8 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -53,7 +53,7 @@
#endif /* CONFIG_PPC_OF */
#define DRV_NAME "sata_svw"
-#define DRV_VERSION "2.1"
+#define DRV_VERSION "2.2"
enum {
/* ap->flags bits */
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3a4f445..2d14f3d 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -44,7 +44,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.10"
+#define DRV_VERSION "0.11"
enum {
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 006f5e3..6815de7 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -36,7 +36,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_uli"
-#define DRV_VERSION "1.1"
+#define DRV_VERSION "1.2"
enum {
uli_5289 = 0,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index ac4f43c..01bba26 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "2.1"
+#define DRV_VERSION "2.2"
enum board_ids_enum {
vt6420,
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 80126f8..8133017 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
-#define DRV_VERSION "2.1"
+#define DRV_VERSION "2.2"
enum {
VSC_MMIO_BAR = 0,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 666592e..85f7b1b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -574,8 +574,6 @@ struct ata_port_operations {
void (*phy_reset) (struct ata_port *ap); /* obsolete */
int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
- void (*post_set_mode) (struct ata_port *ap);
-
int (*cable_detect) (struct ata_port *ap);
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists