| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200705241146.24079.bzolnier@gmail.com>
Date: Thu, 24 May 2007 11:46:23 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: Thomas Kuther <gimpel@...nenkinder.org>
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>, linux-kernel@...r.kernel.org,
linux-ide@...r.kernel.org
Subject: Re: IT821x: no DMA since 2.6.21
Hi,
On Friday 18 May 2007, Thomas Kuther wrote:
> On Mi, 16.05.07 11:46 Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
> wrote:
>
> > > Shall I test it without "noraid=1" too?
> >
> > Please do, the main goal of the patch was to fix "RAID mode"
> > ("noraid=1" should work fine also without the patch?).
> >
> > Thanks,
> > Bart
>
> Hi,
>
> sorry for late response. Now the results in smart mode:
> ---------------------------------------------------
> IT8212: IDE controller at PCI slot 0000:00:09.0
> ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
> IT8212: chipset revision 17
> it821x: controller in smart mode.
> IT8212: 100% native mode on irq 18
> ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
> Probing IDE interface ide2...
> hde: SAMSUNG SP2514N, ATA DISK drive
> hdf: Maxtor 6Y120L0, ATA DISK drive
> hde: Performing identify fixups.
> hdf: Performing identify fixups.
> ide2 at 0xec00-0xec07,0xe802 on irq 18
> hde: max request size: 128KiB
> hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
> hde:hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: recal_intr: error=0x04 { DriveStatusError }
> ide: failed opcode was: unknown
> hde1
> hdf: max request size: 128KiB
> hdf: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63
> hdf:hdf: recal_intr: status=0x51 { DriveReady SeekComplete Error }
> hdf: recal_intr: error=0x04 { DriveStatusError }
> ide: failed opcode was: unknown
> hdf1
> ------------------------------------------------------
>
> # hdparm -d1 /dev/hde
>
> /dev/hde:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Input/output error
> using_dma = 0 (off)
>
> -------------------------------------------------------
>
> Buffered reads: 3.06MB/s
>
> Seems I shot too quick, DMA in smart mode still does not work.
> "noraid=1" also works without the patch, correct.
Improved patch - this time the issue should be fixed for good (I was
looking only at the RAID specific part of the fixups and I overlooked
the fact that the original code was clearing too much of id->field_valid),
there is now also an extra debugging printk to give us some more info.
Please give it a try.
[ recal_intr warning (which should be harmless) is not fixed by this
patch because it is a different problem and requires some more work. ]
---
drivers/ide/ide-probe.c | 12 ++++++------
drivers/ide/pci/it821x.c | 38 +++++++++++++++++++++++---------------
2 files changed, 29 insertions(+), 21 deletions(-)
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -717,7 +717,7 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave);
* This routine only knows how to look for drive units 0 and 1
* on an interface, so any setting of MAX_DRIVES > 2 won't work here.
*/
-static void probe_hwif(ide_hwif_t *hwif)
+static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
{
unsigned int unit;
unsigned long flags;
@@ -820,6 +820,9 @@ static void probe_hwif(ide_hwif_t *hwif)
return;
}
+ if (fixup)
+ fixup(hwif);
+
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
@@ -874,10 +877,7 @@ static int hwif_init(ide_hwif_t *hwif);
int probe_hwif_init_with_fixup(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
{
- probe_hwif(hwif);
-
- if (fixup)
- fixup(hwif);
+ probe_hwif(hwif, fixup);
if (!hwif_init(hwif)) {
printk(KERN_INFO "%s: failed to initialize IDE interface\n",
@@ -1404,7 +1404,7 @@ int ideprobe_init (void)
for (index = 0; index < MAX_HWIFS; ++index)
if (probe[index])
- probe_hwif(&ide_hwifs[index]);
+ probe_hwif(&ide_hwifs[index], NULL);
for (index = 0; index < MAX_HWIFS; ++index)
if (probe[index])
hwif_init(&ide_hwifs[index]);
Index: b/drivers/ide/pci/it821x.c
===================================================================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -262,7 +262,7 @@ static int it821x_tunepio(ide_drive_t *d
}
if (itdev->smart)
- goto set_drive_speed;
+ return 0;
/* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */
itdev->want[unit][1] = pio_want[set_pio];
@@ -271,7 +271,6 @@ static int it821x_tunepio(ide_drive_t *d
it821x_clock_strategy(drive);
it821x_program(drive, itdev->pio[unit]);
-set_drive_speed:
return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio);
}
@@ -455,12 +454,12 @@ static int it821x_tune_chipset (ide_driv
default:
return 1;
}
+
+ return ide_config_drive_speed(drive, speed);
}
- /*
- * In smart mode the clocking is done by the host controller
- * snooping the mode we picked. The rest of it is not our problem
- */
- return ide_config_drive_speed(drive, speed);
+
+ /* don't touch anything in the smart mode */
+ return 0;
}
/**
@@ -543,6 +542,13 @@ static void __devinit it821x_fixups(ide_
id = drive->id;
idbits = (u16 *)drive->id;
+ /* debug */
+ printk(KERN_INFO "%s: field_valid=%04x capability=%02x "
+ "dma_mword=%04x dma_status=%02x\n",
+ drive->name,
+ id->field_valid, id->capability,
+ id->dma_mword, inb(hwif->dma_status));
+
/* Check for RAID v native */
if(strstr(id->model, "Integrated Technology Express")) {
/* In raid mode the ident block is slightly buggy
@@ -559,17 +565,10 @@ static void __devinit it821x_fixups(ide_
if(idbits[129] != 1)
printk("(%dK stripe)", idbits[146]);
printk(".\n");
- /* Now the core code will have wrongly decided no DMA
- so we need to fix this */
- hwif->dma_off_quietly(drive);
-#ifdef CONFIG_IDEDMA_ONLYDISK
- if (drive->media == ide_disk)
-#endif
- ide_set_dma(drive);
} else {
/* Non RAID volume. Fixups to stop the core code
doing unsupported things */
- id->field_valid &= 1;
+ id->field_valid &= 3;
id->queue_depth = 0;
id->command_set_1 = 0;
id->command_set_2 &= 0xC400;
@@ -584,6 +583,15 @@ static void __devinit it821x_fixups(ide_
printk(KERN_INFO "%s: Performing identify fixups.\n",
drive->name);
}
+
+ /*
+ * Set MWDMA0 mode as enabled/support - just to tell
+ * IDE core that DMA is supported (it821x hardware
+ * takes care of DMA mode programming).
+ */
+ id->capability |= 1;
+ id->dma_mword |= 0x0101;
+ drive->current_speed = XFER_MW_DMA_0;
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists