| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4655A0DC.2070600@pakompetens.se> Date: Thu, 24 May 2007 16:27:40 +0200 From: Nicklas Bondesson <nicklas.bondesson@...ompetens.se> To: linux-kernel@...r.kernel.org Subject: Mixing tagged and untagged vlans using via-velocity driver I am trying to setup two vlans (one tagged and one untagged) using the native via-velocity driver in kernel 2.6.21.1 on a single nic (VIA VT6122 Gigabit). I can set it up tagged or untagged without any problems, but not both at the same time. Is this even possible with this driver? To enable vlan5 tagging on the nic I have tried the following: alias eth1 via_velocity options eth1 enable_tagging=1 VID_setting=5 At this point I can communicate with vlan5. When I try to bring up a virtual interface using vconfig it seems to inherit the vlan5 tagging, thus making it impossible to communicate with an untagged vlan. I have also tried the other way around. If I skip "enable_tagging=1 VID_setting=5", I can communicate with a non tagged vlan. If I bring up a new virtual interface (tagged vlan5) using vconfig it does not work. Could it have something to do with the fact that this card supports vlan hw accelleration and upsets vconfig? I'm stuck. If anyone could shed some light on this it would be greatly appreciated. Nicklas - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists