| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <48969.80.228.60.226.1180041664.squirrel@yurusanai.de> Date: Thu, 24 May 2007 23:21:04 +0200 (CEST) From: "Pascal Schmidt" <pasukaru@...usanai.de> To: "Bartlomiej Zolnierkiewicz" <bzolnier@...il.com>, linux-kernel@...r.kernel.org Subject: HPT366 not enabled by kernel 2.6.21.2 Hello! I recently upgraded my kernel to 2.6.21 (.1 and .2 with identical results) and my second IDE controller, a HPT366 on a PCI card, doesn't get enabled any more. The latest previous kernel I used was 2.6.19.7, where the HPT366 worked. Here's the HPT366 part of the 2.6.21.2 dmesg: HPT366: IDE controller at PCI slot 0000:02:0a.0 ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 HPT366: chipset revision 1 HPT366: using 33 MHz PCI clock HPT366: 100% native mode on irq 18 HPT366: neither IDE port enabled (BIOS) ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 18 (level, low) -> IRQ 18 HPT366: using 33 MHz PCI clock HPT366: neither IDE port enabled (BIOS) There is a flash disk connected to the primary channel (master) which also shows up in the controller's BIOS screen, so I don't think it's true that both ports are disabled. Under 2.6.17.9 the "neither IDE port enabled" message doesn't happen and hde gets detected. Please CC me on replies. -- Ciao, Pascal - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists