lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <87y7jemb1u.fsf@wanadoo.fr>
Date:	Thu, 24 May 2007 18:38:37 +0200
From:	Yoann Padioleau <padator@...adoo.fr>
To:	kernel-janitors@...ts.osdl.org
Cc:	akpm@...ux-foundation.org, linux-kernel@...r.kernel.org
Subject: [PATCH] old declaration ritchie style fix


Use consistent function declaration style.

Note that this file is not compiled by make allyesconfig
and its configuration option appears nowhere. Perhaps
it would be better to remove the file.

---

 atari_pamsnet.c |   62 +++++++++++++++++++-------------------------------------
 1 file changed, 22 insertions(+), 40 deletions(-)


diff --git a/drivers/net/atari_pamsnet.c b/drivers/net/atari_pamsnet.c
index 5471440..ea5b868 100644
--- a/drivers/net/atari_pamsnet.c
+++ b/drivers/net/atari_pamsnet.c
@@ -295,10 +295,7 @@ int if_up = 0;
 /* Setup the DMA counter */
 
 static void
-setup_dma (address, rw_flag, num_blocks)
-	void *address;
-	unsigned rw_flag;
-	int num_blocks;
+setup_dma (void *address, unsigned rw_flag, int num_blocks)
 {
 	WRITEMODE((unsigned) rw_flag          | DMA_FDC | SEC_COUNT | REG_ACSI |
 		  A1);
@@ -317,9 +314,7 @@ setup_dma (address, rw_flag, num_blocks)
 /* Send the first byte of an command block */
 
 static int
-send_first (target, byte)
-	int target;
-	unsigned char byte;
+send_first (int target, unsigned char byte)
 {
 	rw = READ;
 	acsi_delay_end(COMMAND_DELAY);
@@ -338,10 +333,7 @@ send_first (target, byte)
 /* Send the rest of an command block */
 
 static int
-send_1_5 (lun, command, dma)
-	int lun;
-	unsigned char *command;
-	int dma;
+send_1_5 (int lun, unsigned char *command, int dma)
 {
 	int i, j;
 
@@ -371,8 +363,7 @@ get_status (void)
 /* Calculate the number of received bytes */
 
 static int
-calc_received (start_address)
-	void *start_address;
+calc_received (void *start_address)
 {
 	return (int)(
 		(((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
@@ -384,8 +375,7 @@ calc_received (start_address)
 /* start() starts the PAM's DMA adaptor */
 
 static void
-start (target)
-	int target;
+start (int target)
 {
 	send_first(target, START);
 }
@@ -393,8 +383,7 @@ start (target)
 /* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
 
 static int
-stop (target)
-	int target;
+stop (int target)
 {
 	int ret = -1;
 	unsigned char cmd_buffer[5];
@@ -415,8 +404,7 @@ bad:
 /* testpkt() returns the number of received packets waiting in the queue */
 
 static int
-testpkt(target)
-	int target;
+testpkt(int target)
 {
 	int ret = -1;
 
@@ -431,9 +419,7 @@ bad:
 /* Please note: The buffer is for internal use only but must be defined!   */
 
 static int
-inquiry (target, buffer)
-	int target;
-	unsigned char *buffer;
+inquiry (int target, unsigned char *buffer)
 {
 	int ret = -1;
 	unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
@@ -468,9 +454,7 @@ bad:
  */
 
 static HADDR
-*read_hw_addr(target, buffer)
-	int target;
-	unsigned char *buffer;
+*read_hw_addr(int target, unsigned char *buffer)
 {
 	HADDR *ret = 0;
 	unsigned char cmd_buffer[5];
@@ -491,9 +475,7 @@ bad:
 }
 
 static irqreturn_t
-pamsnet_intr(irq, data, fp)
-	int irq;
-	void *data;
+pamsnet_intr(int irq, void *data)
 {
 	return IRQ_HANDLED;
 }
@@ -501,9 +483,7 @@ pamsnet_intr(irq, data, fp)
 /* receivepkt() loads a packet to a given buffer and returns its length */
 
 static int
-receivepkt (target, buffer)
-	int target;
-	unsigned char *buffer;
+receivepkt (int target, unsigned char *buffer)
 {
 	int ret = -1;
 	unsigned char cmd_buffer[5];
@@ -526,10 +506,7 @@ bad:
              successfully */
 
 static int
-sendpkt (target, buffer, length)
-	int target;
-	unsigned char *buffer;
-	int length;
+sendpkt (int target, unsigned char *buffer, int length)
 {
 	int ret = -1;
 	unsigned char cmd_buffer[5];
@@ -665,7 +642,8 @@ #endif
    there is non-reboot way to recover if something goes wrong.
  */
 static int
-pamsnet_open(struct net_device *dev) {
+pamsnet_open(struct net_device *dev) 
+{
 	struct net_local *lp = netdev_priv(dev);
 
 	if (pamsnet_debug > 0)
@@ -694,7 +672,8 @@ pamsnet_open(struct net_device *dev) {
 }
 
 static int
-pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) {
+pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) 
+{
 	struct net_local *lp = netdev_priv(dev);
 	unsigned long flags;
 
@@ -741,7 +720,8 @@ pamsnet_send_packet(struct sk_buff *skb,
 /* We have a good packet(s), get it/them out of the buffers.
  */
 static void
-pamsnet_poll_rx(struct net_device *dev) {
+pamsnet_poll_rx(struct net_device *dev) 
+{
 	struct net_local *lp = netdev_priv(dev);
 	int boguscount;
 	int pkt_len;
@@ -816,7 +796,8 @@ pamsnet_poll_rx(struct net_device *dev) 
  * passes them to the higher layers and restarts the timer.
  */
 static void
-pamsnet_tick(unsigned long data) {
+pamsnet_tick(unsigned long data) 
+{
 	struct net_device	 *dev = (struct net_device *)data;
 	struct net_local *lp = netdev_priv(dev);
 
@@ -832,7 +813,8 @@ pamsnet_tick(unsigned long data) {
 /* The inverse routine to pamsnet_open().
  */
 static int
-pamsnet_close(struct net_device *dev) {
+pamsnet_close(struct net_device *dev) 
+{
 	struct net_local *lp = netdev_priv(dev);
 
 	if (pamsnet_debug > 0)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ