| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070527145558.GB17085@havoc.gtf.org>
Date: Sun, 27 May 2007 10:55:58 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
linux-scsi@...r.kernel.org
Cc: LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH 2/5] SCSI/initio pci_dev, pci_dev->irq simplifications
Now that pci_dev is available in the adapter table, we can logically
simplify Addi91u_into_Adapter_table(), HCS and INI_ADPT_STRUCT.
Signed-off-by: Jeff Garzik <jeff@...zik.org>
0151ba1cfeb6565bd1e79b5ba913423f19602d2e
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 8951494..d25a228 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -582,10 +582,9 @@ void tul_read_eeprom(WORD CurBase)
TUL_WR(CurBase + TUL_GCTRL, gctrl & ~TUL_GCTRL_EEPROM_BIT);
} /* read_eeprom */
-static int Addi91u_into_Adapter_table(WORD wBIOS, WORD wBASE, BYTE bInterrupt,
- BYTE bBus, BYTE bDevice,
- struct pci_dev *pci_dev)
+static int Addi91u_into_Adapter_table(WORD wBIOS, struct pci_dev *pci_dev)
{
+ WORD wBASE = pci_dev->resource[0].start;
int i, j;
for (i = 0; i < MAX_SUPPORTED_ADAPTERS; i++) {
@@ -600,16 +599,14 @@ static int Addi91u_into_Adapter_table(WORD wBIOS, WORD wBASE, BYTE bInterrupt,
}
for (j = MAX_SUPPORTED_ADAPTERS - 1; j > i; j--) {
i91u_adpt[j].ADPT_BASE = i91u_adpt[j - 1].ADPT_BASE;
- i91u_adpt[j].ADPT_INTR = i91u_adpt[j - 1].ADPT_INTR;
i91u_adpt[j].ADPT_BIOS = i91u_adpt[j - 1].ADPT_BIOS;
i91u_adpt[j].ADPT_Bus = i91u_adpt[j - 1].ADPT_Bus;
i91u_adpt[j].ADPT_Device = i91u_adpt[j - 1].ADPT_Device;
}
i91u_adpt[i].ADPT_BASE = wBASE;
- i91u_adpt[i].ADPT_INTR = bInterrupt;
i91u_adpt[i].ADPT_BIOS = wBIOS;
- i91u_adpt[i].ADPT_Bus = bBus;
- i91u_adpt[i].ADPT_Device = bDevice;
+ i91u_adpt[i].ADPT_Bus = pci_dev->bus->number;
+ i91u_adpt[i].ADPT_Device = pci_dev->devfn >> 3;
i91u_adpt[i].pci_dev = pci_dev;
return 0;
}
@@ -623,7 +620,6 @@ static void init_i91uAdapter_table(void)
for (i = 0; i < MAX_SUPPORTED_ADAPTERS; i++) { /* Initialize adapter structure */
i91u_adpt[i].ADPT_BIOS = 0xffff;
i91u_adpt[i].ADPT_BASE = 0xffff;
- i91u_adpt[i].ADPT_INTR = 0xff;
i91u_adpt[i].ADPT_Bus = 0xff;
i91u_adpt[i].ADPT_Device = 0xff;
}
@@ -647,8 +643,6 @@ static void get_tulipPCIConfig(HCS * pCurHcb, int ch_idx)
pCurHcb->pci_dev = i91u_adpt[ch_idx].pci_dev;
pCurHcb->HCS_Base = i91u_adpt[ch_idx].ADPT_BASE; /* Supply base address */
pCurHcb->HCS_BIOS = i91u_adpt[ch_idx].ADPT_BIOS; /* Supply BIOS address */
- pCurHcb->HCS_Intr = i91u_adpt[ch_idx].ADPT_INTR; /* Supply interrupt line */
- return;
}
/***************************************************************************/
@@ -777,7 +771,7 @@ static int init_tulip(HCS * pCurHcb, SCB * scbp, int tul_num_scb,
pCurHcb->HCS_MaxTags[i] = 0xFF;
} /* for */
printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
- pCurHcb->HCS_Base, pCurHcb->HCS_Intr,
+ pCurHcb->HCS_Base, pCurHcb->pci_dev->irq,
pCurHcb->HCS_BIOS, pCurHcb->HCS_SCSI_ID);
/*------------------- reset SCSI Bus ---------------------------*/
if (pCurHcb->HCS_Config & HCC_SCSI_RESET) {
@@ -2788,13 +2782,7 @@ static int tul_NewReturnNumberOfAdapters(void)
continue;
}
- if (Addi91u_into_Adapter_table(wBIOS,
- (pDev->resource[0].start),
- pDev->irq,
- pDev->bus->number,
- (pDev->devfn >> 3),
- pDev
- ) == 0)
+ if (Addi91u_into_Adapter_table(wBIOS, pDev) == 0)
iAdapters++;
}
}
@@ -2865,15 +2853,17 @@ static int i91u_detect(struct scsi_host_template * tpnt)
hreg->unique_id = pHCB->HCS_Base;
hreg->max_id = pHCB->HCS_MaxTar;
hreg->max_lun = 32; /* 10/21/97 */
- hreg->irq = pHCB->HCS_Intr;
+ hreg->irq = pHCB->pci_dev->irq;
hreg->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */
hreg->base = (unsigned long)pHCB;
hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
/* Initial tulip chip */
- ok = request_irq(pHCB->HCS_Intr, i91u_intr, IRQF_DISABLED | IRQF_SHARED, "i91u", hreg);
+ ok = request_irq(pHCB->pci_dev->irq, i91u_intr,
+ IRQF_DISABLED | IRQF_SHARED, "i91u", hreg);
if (ok < 0) {
- printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr);
+ printk(KERN_ERR "i91u: unable to request IRQ %d\n\n",
+ pHCB->pci_dev->irq);
return 0;
}
}
diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h
index dcd42e2..817b696 100644
--- a/drivers/scsi/initio.h
+++ b/drivers/scsi/initio.h
@@ -528,7 +528,6 @@ typedef struct I91u_Adpt_Struc {
UWORD ADPT_BASE; /* 1 */
UBYTE ADPT_Bus; /* 2 */
UBYTE ADPT_Device; /* 3 */
- UBYTE ADPT_INTR; /* 4 */
struct pci_dev *pci_dev;
} INI_ADPT_STRUCT;
@@ -536,10 +535,15 @@ typedef struct I91u_Adpt_Struc {
/***********************************************************************
Host Adapter Control Structure
************************************************************************/
+/*
+ * TODO: Remove the "xxx_Unused" struct members only after determining
+ * that this struct does not have special GFP_DMA alignment/padding
+ * restrictions that hamper modification of Ha_Ctrl_Struc.
+ */
typedef struct Ha_Ctrl_Struc {
UWORD HCS_Base; /* 00 */
UWORD HCS_BIOS; /* 02 */
- UBYTE HCS_Intr; /* 04 */
+ UBYTE HCS_Intr_Unused; /* 04 */
UBYTE HCS_SCSI_ID; /* 05 */
UBYTE HCS_MaxTar; /* 06 */
UBYTE HCS_NumScbs; /* 07 */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists