lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 28 May 2007 13:15:54 +0200
From:	Pavel Machek <pavel@....cz>
To:	"Rafael J. Wysocki" <rjw@...k.pl>
Cc:	Kay Sievers <kay.sievers@...y.org>,
	Matthew Garrett <mjg59@...f.ucam.org>,
	pm list <linux-pm@...ts.linux-foundation.org>,
	LKML <linux-kernel@...r.kernel.org>,
	Nigel Cunningham <nigel@...el.suspend2.net>,
	Alan Stern <stern@...land.harvard.edu>,
	Oliver Neukum <oliver@...kum.org>
Subject: Re: [RFC][PATCH -mm 3/3] PM: Disable _request_firmware before hibernation/suspend

Hi!

> > > > What exactly is the problem we see here? The timeout of the firmware loader?
> > > > What goes wrong with frozen userspace, usually there is only a netlink
> > > > message sent from the kernel, which should be received and handled
> > > > just fine when userspace is running again.
> > > 
> > > Driver calls request_firmware in the resume method. The userspace helper 
> > > can't be run because it's been frozen, so the firmware never gets loaded 
> > > and the call times out. The driver then fails to resume. While all this 
> > > is happening, the rest of the kernel is blocking on that resume method. 
> > > The firmware can be loaded once userspace has been started again, but by 
> > > that time the driver has given up.
> > 
> > Seems, that's just the broken synchronous firmware loading interface
> > with the useless timeout handling. The nowait version of the same loader
> > doesn't time out, and should not have that problem. The sync version
> > should be removed from the kernel, it just causes all sorts of problems
> > since it exists.
> > 
> > Userspace should handle the async request just fine when it comes back
> > running, regardless of the time it was submitted.
> 
> Okay, so the solution is to convert the drivers to use
> request_firmware_nowait() instead of request_firmware() in their .resume()
> routines.

You'll just get deadlock at different level (and more rare).

Imagine disk with its firmware on NFS and NFS with its firmware on
disk.

(Or maybe firmware loader doing find /, including both disk and
NFS). Just don't call request_firmware_* from .resume().


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ