lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1180447123.17146.4.camel@dhcp-10-12-136-115.broadcom.com>
Date:	Tue, 29 May 2007 06:58:43 -0700
From:	"Gary Zambrano" <zambrano@...adcom.com>
To:	"Maximilian Engelhardt" <maxi@...monizer.de>
cc:	"Thomas Gleixner" <tglx@...utronix.de>,
	"Michael Buesch" <mb@...sch.de>,
	"linux-kernel" <linux-kernel@...r.kernel.org>,
	"linux-wireless" <linux-wireless@...r.kernel.org>,
	"Stephen Hemminger" <shemminger@...ux-foundation.org>,
	"Arnaldo Carvalho de Melo" <acme@...stprotocols.net>,
	"Jeff Garzik" <jgarzik@...ox.com>, netdev@...r.kernel.org,
	"Andrew Morton" <akpm@...ux-foundation.org>
Subject: Re: b44: regression in 2.6.22 (resend)

On Mon, 2007-05-28 at 13:55 -0700, Maximilian Engelhardt wrote:
> On Monday 28 May 2007, Thomas Gleixner wrote:
> > On Mon, 2007-05-28 at 19:44 +0200, Maximilian Engelhardt wrote:
> > > > Can you please keep CONFIG_HIGH_RES_TIMERS and CONFIG_NOHZ and try the
> > > > following combinations on the kernel command line:
> > > >
> > > > 1) highres=off nohz=off (should be the same as your working config)
> > > > 2) highres=off
> > > > 3) nohz=off
> > >
> > > I tested this with my 2.6.22-rc3 kernel, here are the results:
> > >
> > > without any special boot parameters: problem does appear
> > > highres=off nohz=off: problem does not appear
> > > highres=off: problem does not appear
> > > nohz=off: problem does appear
> >
> > Is there any other strange behavior of the high res enabled kernel than
> > the b44 problem ?
> 
> I didn't notice anything.
> 
> >
> > > I additionally built my 2.6.22-rc2-mm1 kernel without High Resolution
> > > Timer, but the high ping problem is still there.
> >
> > Hmm, that's mysterious. Wild guess is that highres exposes the hidden
> > "feature" in a different way than rc2-mm1 does.
> 
> I think the bug in 2.6.21/22-rc3 is a different one that the one in 
> 2.6.22-rc2-mm1, but that's also only a wild guess :)
> 
> I'll explain this a bit:
> In 2.6.21/22-rc3 is the same b44 driver that has been in the stock kernels for 
> some time. With this driver and High Resolution Timer turned on I get 
> problems using iperf. The problems are that the systems becomes really slow 
> and unresponsive.  Michael Buesch thought this could be an IRQ storm which 
> sounds logical to me. This bug did never happen to me before I startet the 
> iperf test.


Can you please check to see if you notice anything out of the ordinary
using netperf in place of iperf in your high res timer on/off testbed?

Thanks,
Gary







-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ