| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <465D355B.4030401@dunaweb.hu>
Date: Wed, 30 May 2007 10:27:07 +0200
From: Zoltan Boszormenyi <zboszor@...aweb.hu>
To: linux-kernel <linux-kernel@...r.kernel.org>
Subject: MCP55 NCQ problem?
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to the
disk
that was resetted), browsing mail in thunderbird which also exercised
the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
...
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:47:47 localhost kernel: ata2: EH complete
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
May 29 12:49:23 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x2000000 action 0x2 frozen
May 29 12:49:23 localhost kernel: ata2: SError: {UnrecFIS }
May 29 12:49:23 localhost kernel: ata2.00: cmd
61/40:08:3f:71:fa/00:00:07:00:00/40 tag 1 cdb 0x0 data 32768 out
May 29 12:49:23 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:49:23 localhost kernel: ata2.00: status: {DRDY }
May 29 12:49:23 localhost kernel: ata2.00: cmd
61/10:10:7f:e7:fa/00:00:07:00:00/40 tag 2 cdb 0x0 data 8192 out
May 29 12:49:23 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:49:23 localhost kernel: ata2.00: status: {DRDY }
May 29 12:49:23 localhost kernel: ata2: hard resetting port
May 29 12:49:24 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:49:24 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:49:24 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:49:24 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:49:24 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:49:24 localhost kernel: ata2: EH complete
May 29 12:49:24 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:49:24 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:49:24 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
May 29 12:50:24 localhost kernel: ata2.00: NCQ disabled due to excessive
errors
May 29 12:50:24 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:50:24 localhost kernel: ata2.00: cmd
61/10:08:c7:88:b8/00:00:0f:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:50:24 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:50:24 localhost kernel: ata2.00: status: {DRDY }
May 29 12:50:24 localhost kernel: ata2.00: cmd
61/10:10:9f:8a:b8/00:00:0f:00:00/40 tag 2 cdb 0x0 data 8192 out
May 29 12:50:24 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:50:24 localhost kernel: ata2.00: status: {DRDY }
May 29 12:50:24 localhost kernel: ata2: hard resetting port
May 29 12:50:25 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:50:25 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:50:25 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:50:25 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:50:25 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:50:25 localhost kernel: ata2: EH complete
May 29 12:50:25 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:50:25 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:50:25 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
After the system disabled NCQ there weren't any more more ata resets
and the disks were working OK.
Strange thing is, when I have run PostgreSQL pgbench with 25 clients
on 2.6.22-rc2 + cfs-v13 + swncq (which clearly showed advanced transfer
rate)
I had no such problems. The PostgreSQL DB was also on ata2.00.
Best regards,
Zoltán Böszörményi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists