lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 30 May 2007 20:52:29 +0530
From:	"Tej Parkash" <tejparkash.d@...il.com>
To:	"Sam Ravnborg" <sam@...nborg.org>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: Linux-kernel-digest Digest, Vol 32, Issue 795

On 5/30/07, Sam Ravnborg <sam@...nborg.org> wrote:
> On Wed, May 30, 2007 at 08:07:53PM +0530, Tej Parkash wrote:
> > On 5/30/07, Tej Parkash <tejparkash.d@...il.com> wrote:
> > >> > >
> > >> > > while building module i was getting following warning and it
> > >terminate
> > >> > > module building stage
> > >> > The below are only warnings and your build should succeed.
> > >> >
> > >> > It is obviously i386 - is it a clean allmodconfig or any changes?
> > >> > Is it latest -linus or some older version of the codebase?
> > >> Did an allmodconfig build of i386 - I see (almost) all warnings here.
> > >> So I will take a look based on this.
> >
> > yaa i got the warning but as i said building stage is also getting
> > terminated, without any error.
> >
> > >The MODPOST stage took a while but it proceeded with no hick-ups.
> > > MDOPSOT deals with ~2000 modules in my case and that consumes a bit
> > > of memory. Maybe you are hitting the limit with respect to available RAM
> > > / SWAP?
> > >
> > >        Sam
> > >
> > >
> > I don't think so that RAM or SWAP space is a constraint, is it related
> > to kernel build option or some change in arch. config files
> > I am not aware of the required patches for the same.
> Can you please post relevant parts of a build with make V=2
> That is the last couple of commands before the build suddenly stops.
> Also to error-code reported by make must be included.
>
> Ohh, and exact command-line + config you use.
>
>         Sam
>

make -C /lib/modules/2.6.21.3/build/ SUBDIR=/home/tej/Offload modules
make[1]: Entering directory `/home/tej/linux_src/linux-2.6.21.3'
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  Building modules, stage 2.
  MODPOST 1889 modules
WARNING: vmlinux - Section mismatch: reference to
.init.text:start_kernel from .text between 'is386' (at offset
0xc0101171) and 'check_x87'
WARNING: vmlinux - Section mismatch: reference to .init.text: from
.text between 'rest_init' (at offset 0xc0101458) and 'try_name'
WARNING: vmlinux - Section mismatch: reference to
.init.text:__alloc_bootmem from .text between 'init_gdt' (at offset
0xc010adfb) and 'cpu_init'
WARNING: vmlinux - Section mismatch: reference to
.init.text:__alloc_bootmem from .text between 'init_gdt' (at offset
0xc010ae11) and 'cpu_init'
WARNING: vmlinux - Section mismatch: reference to
.init.text:sysenter_setup from .text between 'identify_cpu' (at offset
0xc010b46b) and 'display_cacheinfo'
WARNING: vmlinux - Section mismatch: reference to
.init.text:mtrr_bp_init from .text between 'identify_cpu' (at offset
0xc010b475) and 'display_cacheinfo'
WARNING: vmlinux - Section mismatch: reference to
.init.text:trap_init_f00f_bug from .text between 'init_intel' (at
offset 0xc010d576) and 'cpuid4_cache_lookup'
WARNING: vmlinux - Section mismatch: reference to .init.text: from
.text between 'iret_exc' (at offset 0xc02f2c2e) and '_etext'
WARNING: vmlinux - Section mismatch: reference to
.init.data:initkmem_list3 from .text between 'set_up_list3s' (at
offset 0xc0173aff) and 's_start'
WARNING: vmlinux - Section mismatch: reference to
.init.text:eisa_root_register from .text between
'virtual_eisa_root_init' (at offset 0xc026fecf) and
'cpufreq_unregister_driver'
WARNING: vmlinux - Section mismatch: reference to .init.text: from
.text between 'iret_exc' (at offset 0xc02f32c8) and '_etext'
make[1]: Leaving directory `/home/tej/linux_src/linux-2.6.21.3'


the actaul kernel where i am running this make is in
/home/tej/linux_src/linux-2.6.21.3.

thanks
tej
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ