linux-kernel - Compact Flash performance...

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <6278d2220705301510y2d81f69eu38fb778d32de05e1@mail.gmail.com>
Date:	Wed, 30 May 2007 23:10:18 +0100
From:	"Daniel J Blueman" <daniel.blueman@...il.com>
To:	bzolnier@...il.com
Cc:	linux-ide@...r.kernel.org,
	"Linux Kernel" <linux-kernel@...r.kernel.org>
Subject: Compact Flash performance...

I have a SanDisk Extreme IV 4GB CF card, capable of 40MB/s read, but
am seeing 30MB/s read [1], connected directly to the IDE bus on my
ICH8 controller.

How can I find out if this would be a timing or configuration issue?
On 2.6.20.5 [2], the 120nS timing looks to be right [3], but perhaps
no multi-word transfer is hurting here...alas, it can't be enabled
with the libata subsystem and 'hdparm -m', so what else?

Daniel

--- [1]

# hdparm -t /dev/sdb
/dev/sdb:
 Timing buffered disk reads:   94 MB in  3.05 seconds =  30.79 MB/sec

--- [2]

ata7: PATA max UDMA/100 cmd 0x000000000001bc00 ctl 0x000000000001b882
bmdma 0x000000000001b400 irq 17
ata7.00: CFA: SanDisk SDCFX-4096, HDX 4.04, max UDMA/66
ata7.00: 8027712 sectors, multi 0: LBA
ata7.00: configured for UDMA/66
ATA: abnormal status 0x7F on port 0x000000000001b807
scsi 6:0:0:0: Direct-Access     ATA      SanDisk SDCFX-40 HDX  PQ: 0 ANSI: 5
SCSI device sdb: 8027712 512-byte hdwr sectors (4110 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 8027712 512-byte hdwr sectors (4110 MB)
sdb: sdb1
sd 6:0:0:0: Attached scsi removable disk sdb

--- [3]

# hdparm -I /dev/sdb

/dev/sdb:

CompactFlash ATA device, with removable media
        Model Number:       SanDisk SDCFX-4096
        Serial Number:      116802D2807J3335
        Firmware Revision:  HDX 4.04
Standards:
        Supported: 4
        Likely used: 4
Configuration:
        Logical         max     current
        cylinders       7964    7964
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:    8027712
        LBA    user addressable sectors:    8027712
        device size with M = 1024*1024:        3919 MBytes
        device size with M = 1000*1000:        4110 MBytes (4 GB)
Capabilities:
        LBA, IORDY(may be)(cannot be disabled)
        Standby timer values: spec'd by Vendor
        R/W multiple sector transfer: Max = 4   Current = 0
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
                Write cache
           *    CFA feature set
-- 
Daniel J Blueman
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/