Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder3.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:11:19 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000000ff00000 end: 0000000010000000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 256MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 65536) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65536 HighMem 65536 -> 65536 early_node_map[1] active PFN ranges 0: 0 -> 65536 On node 0 totalpages: 65536 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 480 pages used for memmap Normal zone: 60960 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap DMI not present or invalid. Using APIC driver default ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 20000000 (gap: 10000000:effc0000) Built 1 zonelists. Total pages: 65024 Kernel command line: initrd=initrd.img console=tty0 console=ttyS0 debug BOOT_IMAGE=vmlinuz Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c076e000 soft=c074e000 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 2135.092 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 249556k/262144k available (2037k kernel code, 12036k reserved, 1069k data, 236k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc55000 - 0xfffff000 (3752 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) .init : 0xc070e000 - 0xc0749000 ( 236 kB) .data : 0xc05fd722 - 0xc0708cb4 (1069 kB) .text : 0xc0400000 - 0xc05fd722 (2037 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 17104.71 BogoMIPS (lpj=8552357) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0781abfd 00000000 00000000 00000000 00000001 00000000 00000000 CPU: L1 I cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: 0781a3fd 00000000 00000000 00000040 00000001 00000000 00000000 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed CPU0: Intel Pentium II (Klamath) stepping 03 SMP motherboard not detected. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1376 bytes Time: 19:26:14 Date: 05/04/107 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf9fa0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b100-b10f claimed by PIIX4 SMB Boot video device is 0000:00:02.0 PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5541k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1180985175.184:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key C3680E46D35DB7E1 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 Clocksource tsc unstable (delta = 1700358775 ns) RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Time: pit clocksource has been installed. input: Macintosh mouse button emulation as /class/input/input0 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 11:688:444 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 236k freed Write protecting the kernel read-only data: 803k Greetings. anaconda installer init version 11.2.0.66 starting mounting /proc filesystem... done creating /dev filesystem... done mounting /dev/pts (unix98 pty) filesystem... done mounting /sys filesystem... done input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 anaconda installer init version 11.2.0.66 using a serial console trying to remount root filesystem read write... done mounting /tmp as ramfs... done running install... running /sbin/loader