lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 05 Jun 2007 17:14:46 +0100 From: David Greaves <david@...eaves.com> To: Linus Torvalds <torvalds@...ux-foundation.org>, Tejun Heo <htejun@...il.com>, Jeff Garzik <jgarzik@...ox.com> Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>, mikpe@...uu.se Subject: Re: Linux 2.6.22-rc4 - sata_promise regression since -rc3 Linus Torvalds wrote: > So -rc4 is out there now, hopefully shrinking the regression list further. > I'd ask that people involved with the known regressions please test > whether they got fixed, and if you wrote a patch and it's still pending, > please make sure to push it upstream.. [Tejun, Jeff, added you since the bisect points to your patch.] Sorry, mail glitch means I lost a couple of emails... I said: Compile warnings and a new regression: hang on boot during sata_promise detection... It turns out that the hang times out; it does boot after a while. It's missing 4 of my SATA disks though. [in turn this means I can't test the hibernate regression against -rc4. But testing that regression against a862b5c8cd5d847779a049a5fc8cf5b1e6f5fa07 shows it is still there. Do I get a bonus for finding 2 regressions?]] I also bisected and got: Bisecting: 0 revisions left to test after this [464cf177df7727efcc5506322fc5d0c8b896f545] libata: always use polling SETXFER According to marc, Mikail said: Please give us some details about your sata_promise problem: - describe your hardware (Promise chip version, mainboard, chipset, etc) I have a Promise TX-4 and onboard via-sata. 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:0d.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) - which was the last kernel version prior to 2.6.22-rc4 that worked 2.6.22-rc3 - the kernel messages up to the hang, if you can capture them Easier once I learned patience... sata_promise 0000:00:0d.0: version 2.07 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 17 scsi0 : sata_promise scsi1 : sata_promise scsi2 : sata_promise scsi3 : sata_promise ata1: SATA max UDMA/133 cmd 0xf880a200 ctl 0xf880a238 bmdma 0x00000000 irq 0 ata2: SATA max UDMA/133 cmd 0xf880a280 ctl 0xf880a2b8 bmdma 0x00000000 irq 0 ata3: SATA max UDMA/133 cmd 0xf880a300 ctl 0xf880a338 bmdma 0x00000000 irq 0 ata4: SATA max UDMA/133 cmd 0xf880a380 ctl 0xf880a3b8 bmdma 0x00000000 irq 0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata1.00: ATA-7: Maxtor 6B250S0, BANC19J0, max UDMA/133 ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32) ata1.00: qc timeout (cmd 0xef) ata1.00: failed to set xfermode (err_mask=0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata1.00: qc timeout (cmd 0xef) ata1.00: failed to set xfermode (err_mask=0x4) ata1.00: limiting speed to UDMA/133:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata1.00: qc timeout (cmd 0xef) ata1.00: failed to set xfermode (err_mask=0x4) ata1.00: disabled ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata2.00: ATA-7: Maxtor 7Y250M0, YAR51EW0, max UDMA/133 ata2.00: 490234752 sectors, multi 0: LBA48 ata2.00: qc timeout (cmd 0xef) ata2.00: failed to set xfermode (err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata2.00: qc timeout (cmd 0xef) ata2.00: failed to set xfermode (err_mask=0x4) ata2.00: limiting speed to UDMA/133:PIO3 ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata2.00: qc timeout (cmd 0xef) ata2.00: failed to set xfermode (err_mask=0x4) ata2.00: disabled ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata3.00: ATA-7: Maxtor 7Y250M0, YAR51EW0, max UDMA/133 ata3.00: 490234752 sectors, multi 0: LBA48 ata3.00: qc timeout (cmd 0xef) ata3.00: failed to set xfermode (err_mask=0x4) ata3: failed to recover some devices, retrying in 5 secs ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata3.00: qc timeout (cmd 0xef) ata3.00: failed to set xfermode (err_mask=0x4) ata3.00: limiting speed to UDMA/133:PIO3 ata3: failed to recover some devices, retrying in 5 secs ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata3.00: qc timeout (cmd 0xef) ata3.00: failed to set xfermode (err_mask=0x4) ata3.00: disabled ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata4.00: ATA-7: Maxtor 6B250S0, BANC1980, max UDMA/133 ata4.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32) ata4.00: qc timeout (cmd 0xef) ata4.00: failed to set xfermode (err_mask=0x4) ata4: failed to recover some devices, retrying in 5 secs ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata4.00: qc timeout (cmd 0xef) ata4.00: failed to set xfermode (err_mask=0x4) ata4.00: limiting speed to UDMA/133:PIO3 ata4: failed to recover some devices, retrying in 5 secs ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata4.00: qc timeout (cmd 0xef) ata4.00: failed to set xfermode (err_mask=0x4) ata4.00: disabled sata_via 0000:00:0f.0: version 2.2 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 sata_via 0000:00:0f.0: routed to hard irq line 0 scsi4 : sata_via scsi5 : sata_via ata5: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001a802 bmdma 0x00019800 irq 0 ata6: SATA max UDMA/133 cmd 0x0001a400 ctl 0x0001a002 bmdma 0x00019808 irq 0 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x0001b007 ATA: abnormal status 0x7F on port 0x0001b007 ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata5.00: ATA-7: Maxtor 7B250S0, BANC1980, max UDMA/133 ata5.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata5.00: configured for UDMA/133 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x0001a407 ATA: abnormal status 0x7F on port 0x0001a407 ata6.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768 ata6.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 ata6.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata6.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768 ata6.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA Maxtor 7B250S0 BANC PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 4:0:0:0: [sda] Attached SCSI disk scsi 5:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 sd 5:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 5:0:0:0: [sdb] Attached SCSI disk - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists