| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070610033159.GA29752@havoc.gtf.org>
Date: Sat, 9 Jun 2007 23:31:59 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes
As mentioned, will push Tejun's updated probe patch when received.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 24 ++++++++++++++++
drivers/ata/libata-core.c | 29 +++++++++++++-------
drivers/ata/libata-scsi.c | 67 +++++++++++++++++++++++++++++----------------
drivers/ata/libata-sff.c | 37 +++++++++++++++++++-----
drivers/ata/pata_isapnp.c | 1 -
include/linux/ata.h | 3 +-
include/linux/libata.h | 1 +
7 files changed, 118 insertions(+), 44 deletions(-)
Alan Cox (2):
libata-core/sff: Fix multiple assumptions about DMA
libata: Correct abuse of language
Albert Lee (6):
libata: print device model and firmware revision for ATAPI devices
libata passthru: update protocol numbers
libata passthru: support PIO multi commands
libata passthru: map UDMA protocols
libata passthru: always enforce correct DEV bit
libata passthru: update cached device paramters
Olof Johansson (1):
libata: fix probe time irq printouts
Peer Chen (1):
ahci: Add MCP73/MCP77 support to AHCI driver
Tejun Heo (2):
libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP
libata: fix hw_sata_spd_limit initialization
Yoichi Yuasa (1):
remove unused variable in pata_isapnp
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7baeaff..545f330 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -426,6 +426,30 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4733f00..4b3c45e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1727,7 +1727,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
/* sanity check */
rc = -EINVAL;
- reason = "device reports illegal type";
+ reason = "device reports invalid type";
if (class == ATA_DEV_ATA) {
if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
@@ -1900,6 +1900,13 @@ int ata_dev_configure(struct ata_device *dev)
if (ata_msg_probe(ap))
ata_dump_id(id);
+ /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
+ ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
+ sizeof(fwrevbuf));
+
+ ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
+ sizeof(modelbuf));
+
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
@@ -1914,13 +1921,6 @@ int ata_dev_configure(struct ata_device *dev)
dev->n_sectors = ata_id_n_sectors(id);
- /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
- ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
- sizeof(fwrevbuf));
-
- ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
- sizeof(modelbuf));
-
if (dev->id[59] & 0x100)
dev->multi_count = dev->id[59] & 0xff;
@@ -2009,7 +2009,9 @@ int ata_dev_configure(struct ata_device *dev)
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info)
- ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n",
+ ata_dev_printk(dev, KERN_INFO,
+ "ATAPI: %s, %s, max %s%s\n",
+ modelbuf, fwrevbuf,
ata_mode_string(xfer_mask),
cdb_intr_string);
}
@@ -3791,6 +3793,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
+ /* Drives which do spurious command completion */
+ { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
@@ -6313,7 +6317,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
/* init sata_spd_limit to the current value */
if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) {
int spd = (scontrol >> 4) & 0xf;
- ap->hw_sata_spd_limit &= (1 << spd) - 1;
+ if (spd)
+ ap->hw_sata_spd_limit &= (1 << spd) - 1;
}
ap->sata_spd_limit = ap->hw_sata_spd_limit;
@@ -6433,6 +6438,9 @@ int ata_host_activate(struct ata_host *host, int irq,
if (rc)
devm_free_irq(host->dev, irq, host);
+ /* Used to print device info at probe */
+ host->irq = irq;
+
return rc;
}
@@ -6818,6 +6826,7 @@ EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
+EXPORT_SYMBOL_GPL(ata_sff_port_start);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_do_set_mode);
EXPORT_SYMBOL_GPL(ata_data_xfer);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b3900cf..c228df2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1363,12 +1363,22 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
* schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE
* cache
*/
- if (ap->ops->error_handler &&
- !need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) &&
- ((qc->tf.feature == SETFEATURES_WC_ON) ||
- (qc->tf.feature == SETFEATURES_WC_OFF))) {
- ap->eh_info.action |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
+ if (ap->ops->error_handler && !need_sense) {
+ switch (qc->tf.command) {
+ case ATA_CMD_SET_FEATURES:
+ if ((qc->tf.feature == SETFEATURES_WC_ON) ||
+ (qc->tf.feature == SETFEATURES_WC_OFF)) {
+ ap->eh_info.action |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ }
+ break;
+
+ case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
+ case ATA_CMD_SET_MULTI: /* multi_count changed */
+ ap->eh_info.action |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ break;
+ }
}
/* For ATA pass thru (SAT) commands, generate a sense block if
@@ -2506,22 +2516,21 @@ ata_scsi_map_proto(u8 byte1)
return ATA_PROT_NODATA;
case 6: /* DMA */
+ case 10: /* UDMA Data-in */
+ case 11: /* UDMA Data-Out */
return ATA_PROT_DMA;
case 4: /* PIO Data-in */
case 5: /* PIO Data-out */
return ATA_PROT_PIO;
- case 10: /* Device Reset */
case 0: /* Hard Reset */
case 1: /* SRST */
- case 2: /* Bus Idle */
- case 7: /* Packet */
- case 8: /* DMA Queued */
- case 9: /* Device Diagnostic */
- case 11: /* UDMA Data-in */
- case 12: /* UDMA Data-Out */
- case 13: /* FPDMA */
+ case 8: /* Device Diagnostic */
+ case 9: /* Device Reset */
+ case 7: /* DMA Queued */
+ case 12: /* FPDMA */
+ case 15: /* Return Response Info */
default: /* Reserved */
break;
}
@@ -2552,10 +2561,6 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;
- if (cdb[1] & 0xe0)
- /* PIO multi not supported yet */
- goto invalid_fld;
-
/*
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
@@ -2600,12 +2605,26 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
tf->device = cdb[8];
tf->command = cdb[9];
}
- /*
- * If slave is possible, enforce correct master/slave bit
- */
- if (qc->ap->flags & ATA_FLAG_SLAVE_POSS)
- tf->device = qc->dev->devno ?
- tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+
+ /* enforce correct master/slave bit */
+ tf->device = dev->devno ?
+ tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+
+ /* sanity check for pio multi commands */
+ if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf))
+ goto invalid_fld;
+
+ if (is_multi_taskfile(tf)) {
+ unsigned int multi_count = 1 << (cdb[1] >> 5);
+
+ /* compare the passed through multi_count
+ * with the cached multi_count of libata
+ */
+ if (multi_count != dev->multi_count)
+ ata_dev_printk(dev, KERN_WARNING,
+ "invalid multi_count %u ignored\n",
+ multi_count);
+ }
/* READ/WRITE LONG use a non-standard sect_size */
qc->sect_size = ATA_SECT_SIZE;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index e35d134..ce84805 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -80,25 +80,25 @@ u8 ata_dummy_irq_on (struct ata_port *ap) { return 0; }
u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
- u8 host_stat, post_stat, status;
+ u8 host_stat = 0, post_stat = 0, status;
status = ata_busy_wait(ap, bits, 1000);
if (status & bits)
if (ata_msg_err(ap))
printk(KERN_ERR "abnormal status 0x%X\n", status);
- /* get controller status; clear intr, err bits */
- host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
- iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR,
- ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-
- post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ if (ap->ioaddr.bmdma_addr) {
+ /* get controller status; clear intr, err bits */
+ host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR,
+ ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ }
if (ata_msg_intr(ap))
printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
__FUNCTION__,
host_stat, post_stat, status);
-
return status;
}
@@ -516,6 +516,27 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
ata_bmdma_stop(qc);
}
+/**
+ * ata_sff_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+int ata_sff_port_start(struct ata_port *ap)
+{
+ if (ap->ioaddr.bmdma_addr)
+ return ata_port_start(ap);
+ return 0;
+}
+
#ifdef CONFIG_PCI
static int ata_resources_present(struct pci_dev *pdev, int port)
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 1f647b6..5525518 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -77,7 +77,6 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
struct ata_host *host;
struct ata_port *ap;
void __iomem *cmd_addr, *ctl_addr;
- int rc;
if (pnp_port_valid(idev, 0) == 0)
return -ENODEV;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index edb31bf..703febb 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -151,6 +151,7 @@ enum {
ATA_CMD_WRITE_MULTI_EXT = 0x39,
ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
ATA_CMD_SET_FEATURES = 0xEF,
+ ATA_CMD_SET_MULTI = 0xC6,
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
@@ -249,7 +250,7 @@ enum ata_tf_protocols {
/* ATA taskfile protocols */
ATA_PROT_UNKNOWN, /* unknown/invalid */
ATA_PROT_NODATA, /* no data */
- ATA_PROT_PIO, /* PIO single sector */
+ ATA_PROT_PIO, /* PIO data xfer */
ATA_PROT_DMA, /* DMA */
ATA_PROT_NCQ, /* NCQ */
ATA_PROT_ATAPI, /* packet command, PIO data xfer*/
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a6a3113..745c4f9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -753,6 +753,7 @@ extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
+extern int ata_sff_port_start (struct ata_port *ap);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance);
extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists