| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.0706151249520.23280@twin.jikos.cz>
Date: Fri, 15 Jun 2007 12:51:05 +0200 (CEST)
From: Jiri Kosina <jikos@...os.cz>
To: Islam Amer <pharon@...il.com>
cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-kernel@...r.kernel.org
Subject: Re: USB remote control missing keycodes
On Fri, 15 Jun 2007, Jiri Kosina wrote:
> please try the patch below (against 2.6.22-rc4) and send me the result.
Now I see in the logs that there are also messages about the
report initialization failing, so we should also specify NOGET for this
device.
Could you please try the patch below instead, which does just that?
Thanks.
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 7f81789..a112da2 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -566,6 +566,10 @@ static void hidinput_configure_usage(str
case 0x0e5: map_key_clear(KEY_BASSBOOST); break;
case 0x0e9: map_key_clear(KEY_VOLUMEUP); break;
case 0x0ea: map_key_clear(KEY_VOLUMEDOWN); break;
+
+ /* reserved in HUT 1.12. Reported on Petalynx remote */
+ case 0x0fa: map_key_clear(KEY_BACK); break;
+
case 0x183: map_key_clear(KEY_CONFIG); break;
case 0x184: map_key_clear(KEY_WORDPROCESSOR); break;
case 0x185: map_key_clear(KEY_EDITOR); break;
@@ -704,10 +708,10 @@ static void hidinput_configure_usage(str
}
break;
- case HID_UP_LOGIVENDOR: /* Reported on Logitech Ultra X Media Remote */
-
+ case HID_UP_LOGIVENDOR:
set_bit(EV_REP, input->evbit);
switch(usage->hid & HID_USAGE) {
+ /* Reported on Logitech Ultra X Media Remote */
case 0x004: map_key_clear(KEY_AGAIN); break;
case 0x00d: map_key_clear(KEY_HOME); break;
case 0x024: map_key_clear(KEY_SHUFFLE); break;
@@ -725,6 +729,14 @@ static void hidinput_configure_usage(str
case 0x04d: map_key_clear(KEY_SUBTITLE); break;
case 0x051: map_key_clear(KEY_RED); break;
case 0x052: map_key_clear(KEY_CLOSE); break;
+
+ /* Reported on Petalynx Maxter remote */
+ case 0x05a: map_key_clear(KEY_TEXT); break;
+ case 0x05b: map_key_clear(KEY_RED); break;
+ case 0x05c: map_key_clear(KEY_GREEN); break;
+ case 0x05d: map_key_clear(KEY_YELLOW); break;
+ case 0x05e: map_key_clear(KEY_BLUE); break;
+
default: goto ignore;
}
break;
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index d91b9da..b575a07 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -688,6 +688,22 @@ static void hid_fixup_logitech_descripto
}
}
+/* Petalynx Maxter Remote has maximum for consumer page set too low */
+static void hid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
+{
+ if (rsize >= 60 && rdesc[39] == 0x2a
+ && rdesc[40] == 0xf5
+ && rdesc[41] == 0x00
+ && rdesc[59] == 0x26
+ && rdesc[60] == 0xf9
+ && rdesc[61] == 0x00) {
+ info("Fixing up Petalynx Maxter Remote report descriptor");
+ rdesc[60] = 0xfa;
+ rdesc[40] = 0xfa;
+ } else
+ info("Not fixing up Petalynx Maxter Remote report descriptor");
+}
+
/*
* Some USB barcode readers from cypress have usage min and usage max in
* the wrong order
@@ -781,6 +797,9 @@ static struct hid_device *usb_hid_config
if (quirks & HID_QUIRK_SWAPPED_MIN_MAX)
hid_fixup_cypress_descriptor(rdesc, rsize);
+ if (quirks & HID_QUIRK_PETALYNX_DESCRIPTOR)
+ hid_fixup_petalynx_descriptor(rdesc, rsize);
+
#ifdef CONFIG_HID_DEBUG
printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
for (n = 0; n < rsize; n++)
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index f6c4145..bb34e90 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -220,6 +220,9 @@
#define USB_VENDOR_ID_PANTHERLORD 0x0810
#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001
+#define USB_VENDOR_ID_PETALYNX 0x18b1
+#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037
+
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
@@ -418,6 +421,8 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_PETALYNX_DESCRIPTOR | HID_QUIRK_NOGET },
+
{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 827ee74..3b1d638 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -276,6 +276,7 @@ struct hid_item {
#define HID_QUIRK_DUPLICATE_USAGES 0x00200000
#define HID_QUIRK_RESET_LEDS 0x00400000
#define HID_QUIRK_SWAPPED_MIN_MAX 0x00800000
+#define HID_QUIRK_PETALYNX_DESCRIPTOR 0x01000000
/*
* This is the global environment of the parser. This information is
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists