| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <46788188.1040403@codemonkey.ws>
Date: Tue, 19 Jun 2007 20:23:20 -0500
From: Anthony Liguori <anthony@...emonkey.ws>
To: linux-kernel@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, akpm@...ux-foundation.org,
mbligh@...gle.com
Subject: Re: Problem with global_flush_tlb() on i386 in 2.6.22-rc4-mm2
Mathieu Desnoyers wrote:
> Hi,
>
> Trying to test my "Text Edit Lock" patches, I ran into a problem related
> to global_flush_tlb() not doing its job at updating the page flags when,
> it seems, the page has been recently accessed. Therefore, it can only be
> reproduced by doing a couple of iterations.
>
> I run on a Pentium 4 with the following characteristics:
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
> stepping : 1
> cpu MHz : 3000.201
> cache size : 1024 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx
> constant_tsc pebs bts sync_rdtsc pni monitor ds_cpl cid xtpr
> bogomips : 6007.49
> clflush size : 64
>
> config :
> CONFIG_X86_INVLPG=y (complete .config at the end)
> CONFIG_PARAVIRT=y/n
>
>
> (notice that pge and clflush features are present)
>
> The kernel is configured in UP (I first saw the problem in SMT, but
> switched to UP and it is still there).
>
> I provide a really crude hackish test module that shows the problematic
> behavior below.
>
> Whenever I run the module using global_flush_tlb(), I get the following
> OOPS:
>
>
> [ 1112.512389] Init Attr RX
> [ 1112.521691] Init Attr RX end
> [ 1113.702965] Loop 0
> [ 1113.709171] Attr RWX 621545
> [ 1113.717662] Attr RX 621545
> [ 1113.725869] Attr RWX 432917
> [ 1113.734295] Attr RX 432917
> [ 1113.742460] Attr RWX 973425
> [ 1113.750885] Attr RX 973425
> [ 1113.759048] Attr RWX 453890
> [ 1113.767490] Attr RX 453890
> [ 1113.775653] Attr RWX 1035918
> [ 1113.784341] Attr RX 1035918
> [ 1113.792764] Attr RWX 1038276
> [ 1113.801449] Attr RX 1038276
> [ 1113.809902] Attr RWX 71394
> [ 1113.818067] Attr RX 71394
> [ 1113.825970] Attr RWX 88253
> [ 1113.834134] Attr RX 88253
> [ 1113.842039] Attr RWX 108029
> [ 1113.850505] Attr RX 108029
> [ 1113.858670] Attr RWX 767772
> [ 1113.867095] Attr RX 767772
> [ 1113.875259] Attr RWX 251394
> [ 1113.883694] Attr RX 251394
> [ 1113.891859] Attr RWX 817582
> [ 1113.900376] Attr RX 817582
> [ 1113.908540] Attr RWX 577819
> [ 1113.916965] Attr RX 577819
> [ 1113.925127] Attr RWX 56979
> [ 1113.933293] Attr RX 56979
> [ 1113.941195] Attr RWX 72953
> [ 1113.949361] Attr RX 72953
> [ 1113.957265] Attr RWX 94222
> [ 1113.965445] BUG: unable to handle kernel paging request at virtual address c3a1700e
> [ 1113.988291] printing eip:
> [ 1113.996340] f885e0a6
> [ 1114.002835] *pde = 038c6163
> [ 1114.011145] *pte = 03a17163
> [ 1114.019455] Oops: 0003 [#1]
> [ 1114.027766] PREEMPT
> [ 1114.034268] LTT NESTING LEVEL : 0
> [ 1114.044402] Modules linked in: test_rodata ltt_statedump ltt_control sky2 skge rtc snd_hda_intel
> [ 1114.070679] CPU: 0
> [ 1114.070680] EIP: 0060:[<f885e0a6>] Not tainted VLI
> [ 1114.070681] EFLAGS: 00010282 (2.6.22-rc4-mm2-testssmp #129)
> [ 1114.110395] EIP is at my_open+0xa6/0x124 [test_rodata]
> [ 1114.125711] eax: c3a00000 ebx: 0001700e ecx: c39e4000 edx: 00000000
> [ 1114.145953] esi: 36f1700e edi: f885e000 ebp: c39e5ebc esp: c39e5ea0
> [ 1114.166195] ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068
> [ 1114.183583] Process cat (pid: 4112, ti=c39e4000 task=c38ac1b0 task.ti=c39e4000)
> [ 1114.204862] Stack: f885e223 0001700e 00000000 0000f000 c31d3480 00000000 f885e000 c39e5ed8
> [ 1114.229843] c01a3c2a c39d2540 c368d4a8 c39d2540 00000000 c368d4a8 c39e5ef8 c016f5d9
> [ 1114.254830] c1c0eec0 c378ccfc c39e5eec c39d2540 00008000 c39e5f1c c39e5f0c c016f76b
> [ 1114.279814] Call Trace:
> [ 1114.287620] [<c01a3c2a>] proc_reg_open+0x42/0x68
> [ 1114.301655] [<c016f5d9>] __dentry_open+0xe6/0x1e2
> [ 1114.315944] [<c016f76b>] nameidata_to_filp+0x35/0x3f
> [ 1114.331008] [<c016f7b0>] do_filp_open+0x3b/0x43
> [ 1114.344777] [<c016f7fb>] do_sys_open+0x43/0x116
> [ 1114.358545] [<c016f906>] sys_open+0x1c/0x1e
> [ 1114.371274] [<c0104128>] syscall_call+0x7/0xb
> [ 1114.384524] [<ffffe410>] 0xffffe410
> [ 1114.395178] =======================
> [ 1114.405823] INFO: lockdep is turned off.
> [ 1114.417504] Code: 60 df 7c c0 b9 63 01 00 00 ba 01 00 00 00 e8 3f 7d 8b c7 0f ae f0 89 f6 e8 5c 80 8b c7 0f ae f0 89 f6 a1 88 eb 85 f8 0f b6 55 f0 <88> 14 03 0f ae f0 89 f6 89 d8 03 05 88 eb 85 f8 05 00 00 00 40
> [ 1114.474329] EIP: [<f885e0a6>] my_open+0xa6/0x124 [test_rodata] SS:ESP 0068:c39e5ea0
> [ 1114.497187] BUG: sleeping function called from invalid context at kernel/rwsem.c:20
> [ 1114.520025] in_atomic():0, irqs_disabled():1
> [ 1114.532744] INFO: lockdep is turned off.
> [ 1114.544427] irq event stamp: 1894
> [ 1114.554293] hardirqs last enabled at (1893): [<c03c892b>] _spin_unlock_irq+0x22/0x4e
> [ 1114.577666] hardirqs last disabled at (1894): [<c03c8584>] _spin_lock_irqsave+0x25/0x61
> [ 1114.601556] softirqs last enabled at (1886): [<c0122988>] __do_softirq+0xe1/0x184
> [ 1114.624149] softirqs last disabled at (1875): [<c0122a9d>] do_softirq+0x72/0x77
> [ 1114.645969] [<c01051bc>] dump_trace+0x1d5/0x204
> [ 1114.659737] [<c0105205>] show_trace_log_lvl+0x1a/0x30
> [ 1114.675060] [<c0105fc2>] show_trace+0x12/0x14
> [ 1114.688308] [<c0105fd9>] dump_stack+0x15/0x17
> [ 1114.701557] [<c0118dbf>] __might_sleep+0xcf/0xe1
> [ 1114.715584] [<c013273c>] down_read+0x18/0x4b
> [ 1114.728574] [<c011f4a0>] exit_mm+0x27/0xd1
> [ 1114.741045] [<c0120bc1>] do_exit+0x10f/0x88f
> [ 1114.754035] [<c01058ef>] do_trap+0x0/0x152
> [ 1114.766503] [<c0115553>] do_page_fault+0x310/0x7ed
> [ 1114.781050] [<c03c8bda>] error_code+0x6a/0x70
> [ 1114.794303] [<f885e0a6>] my_open+0xa6/0x124 [test_rodata]
> [ 1114.810665] [<c01a3c2a>] proc_reg_open+0x42/0x68
> [ 1114.824692] [<c016f5d9>] __dentry_open+0xe6/0x1e2
> [ 1114.838979] [<c016f76b>] nameidata_to_filp+0x35/0x3f
> [ 1114.854044] [<c016f7b0>] do_filp_open+0x3b/0x43
> [ 1114.867811] [<c016f7fb>] do_sys_open+0x43/0x116
> [ 1114.881579] [<c016f906>] sys_open+0x1c/0x1e
> [ 1114.894308] [<c0104128>] syscall_call+0x7/0xb
> [ 1114.907557] [<ffffe410>] 0xffffe410
> [ 1114.918212] =======================
>
> This is clearly the memory write I am trying to do in the page of
> which I just changed the attributes to RWX.
>
> If I remove the variable read before I change the flags, it starts
> working correctly (as far as I have tested...).
>
> If I use my own my_local_tlb_flush() function (not SMP aware) instead of
> global_flush_tlb(), it works correctly.
>
What is your my_local_tlb_flush() and are you calling with preemption
disabled?
> I also tried just calling clflush on the modified page just after the
> global_flush_tlb(), and the problem was still there.
>
> I therefore suspect that
>
> include/asm-i386/tlbflush.h:
> #define __native_flush_tlb_global() \
> do { \
> unsigned int tmpreg, cr4, cr4_orig; \
> \
> __asm__ __volatile__( \
> "movl %%cr4, %2; # turn off PGE \n" \
> "movl %2, %1; \n" \
> "andl %3, %1; \n" \
> "movl %1, %%cr4; \n" \
> "movl %%cr3, %0; \n" \
> "movl %0, %%cr3; # flush TLB \n" \
> "movl %2, %%cr4; # turn PGE back on \n" \
> : "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig) \
> : "i" (~X86_CR4_PGE) \
> : "memory"); \
> } while (0)
>
> is not doing its job correctly. The problem does not seem to be caused
> by PARAVIRT, because it is still buggy even if I disable the PARAVIRT
> config option.
This is actually very conservative seeing as how disabling CR4.PGE
should be sufficient to flush global pages on modern processors. I
suspect you're getting preempted while it's running.
Regards,
Anthony Liguori
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists