Message-ID: <20070620065710.GR9768@bakeyournoodle.com>
Date:	Wed, 20 Jun 2007 16:57:10 +1000
From:	tony@...eyournoodle.com (Tony Breeds)
To:	Daniel Walker <dwalker@...sta.com>
Cc:	Thomas Gleixner <tglx@...utronix.de>,
	LKML <linux-kernel@...r.kernel.org>,
	Andrew Morton <akpm@...l.org>, Ingo Molnar <mingo@...e.hu>,
	john stultz <johnstul@...ibm.com>,
	LinuxPPC-dev <linuxppc-dev@...abs.org>
Subject: [RFC] clocksouce implementation for powerpc

On Sat, Jun 16, 2007 at 08:51:23AM -0700, Daniel Walker wrote:
> On Sat, 2007-06-16 at 10:36 +0000, Thomas Gleixner wrote:
> > plain text document attachment
> > (clocksource-add-settimeofday-hook.patch)
> > From: Tony Breeds <tony@...eyournoodle.com >
> > 
> > I'm working on a clocksource implementation for all powerpc platforms.
> > some of these platforms needs to do a little work as part of the
> > settimeofday() syscall and I can't see a way to do that without adding
> > this hook to clocksource.
> > 
> 
> 
> I'd like to see how this is used? If the code that uses this API change
> isn't ready yet, then this patch should really wait..

This is my current patch to rework arch/powerpc/kernel/time.c to create
a clocksource.  It's not ready for inclusion.

powerpc needs to keep the vdso in sync whenener settimeodfay() is
called.  Adding the hook the to the clocksource structure was my way of
allowing this to happen.  There are other approaches, but this seemed to
best allow for runtime.  Initially I considered using update_vsyscall()
but this is called from do_timer(), and I don't need this code run then
:(

This has been booted on pSeries and iSeries (I'm using glibc 2.5, which
uses the vdso gettimeoday())

All comments appreiated.

Index: working/arch/powerpc/Kconfig
===================================================================
--- working.orig/arch/powerpc/Kconfig
+++ working/arch/powerpc/Kconfig
@@ -31,6 +31,12 @@ config MMU
 	bool
 	default y
 
+config GENERIC_TIME
+	def_bool y
+
+config GENERIC_TIME_VSYSCALL
+	def_bool y
+
 config GENERIC_HARDIRQS
 	bool
 	default y
Index: working/arch/powerpc/kernel/time.c
===================================================================
--- working.orig/arch/powerpc/kernel/time.c
+++ working/arch/powerpc/kernel/time.c
@@ -74,6 +74,30 @@
 #endif
 #include <asm/smp.h>
 
+/* powerpc clocksource/clockevent code */
+
+/* TODO:
+ *  o Code style
+ *    * Variable names ... be consistent.
+ *
+ * TODO: Clocksource
+ *  o Need a _USE_RTC() clocksource impelementation
+ *  o xtime:  Either time.c manages it, or clocksource does, not both
+ */
+
+#include <linux/clocksource.h>
+
+static struct clocksource clocksource_timebase = {
+	.name         = "timebase",
+	.rating       = 200,
+	.flags        = CLOCK_SOURCE_IS_CONTINUOUS,
+	.mask         = CLOCKSOURCE_MASK(64),
+	.shift        = 22,
+	.mult         = 0,	/* To be filled in */
+	.read         = NULL,   /* To be filled in */
+	.settimeofday = NULL,   /* To be filled in */
+};
+
 /* keep track of when we need to update the rtc */
 time_t last_rtc_update;
 #ifdef CONFIG_PPC_ISERIES
@@ -376,65 +400,6 @@ static __inline__ void timer_check_rtc(v
         }
 }
 
-/*
- * This version of gettimeofday has microsecond resolution.
- */
-static inline void __do_gettimeofday(struct timeval *tv)
-{
-	unsigned long sec, usec;
-	u64 tb_ticks, xsec;
-	struct gettimeofday_vars *temp_varp;
-	u64 temp_tb_to_xs, temp_stamp_xsec;
-
-	/*
-	 * These calculations are faster (gets rid of divides)
-	 * if done in units of 1/2^20 rather than microseconds.
-	 * The conversion to microseconds at the end is done
-	 * without a divide (and in fact, without a multiply)
-	 */
-	temp_varp = do_gtod.varp;
-
-	/* Sampling the time base must be done after loading
-	 * do_gtod.varp in order to avoid racing with update_gtod.
-	 */
-	data_barrier(temp_varp);
-	tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
-	temp_tb_to_xs = temp_varp->tb_to_xs;
-	temp_stamp_xsec = temp_varp->stamp_xsec;
-	xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
-	sec = xsec / XSEC_PER_SEC;
-	usec = (unsigned long)xsec & (XSEC_PER_SEC - 1);
-	usec = SCALE_XSEC(usec, 1000000);
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
-	if (__USE_RTC()) {
-		/* do this the old way */
-		unsigned long flags, seq;
-		unsigned int sec, nsec, usec;
-
-		do {
-			seq = read_seqbegin_irqsave(&xtime_lock, flags);
-			sec = xtime.tv_sec;
-			nsec = xtime.tv_nsec + tb_ticks_since(tb_last_jiffy);
-		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-		usec = nsec / 1000;
-		while (usec >= 1000000) {
-			usec -= 1000000;
-			++sec;
-		}
-		tv->tv_sec = sec;
-		tv->tv_usec = usec;
-		return;
-	}
-	__do_gettimeofday(tv);
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
 
 /*
  * There are two copies of tb_to_xs and stamp_xsec so that no
@@ -666,8 +631,8 @@ void timer_interrupt(struct pt_regs * re
 		if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
 			tb_last_jiffy = tb_next_jiffy;
 			do_timer(1);
-			timer_recalc_offset(tb_last_jiffy);
-			timer_check_rtc();
+			/* timer_recalc_offset() && timer_check_rtc()
+			 * are now called from update_vsyscall() */
 		}
 		write_sequnlock(&xtime_lock);
 	}
@@ -739,77 +704,6 @@ unsigned long long sched_clock(void)
 	return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift;
 }
 
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, new_sec = tv->tv_sec;
-	long wtm_nsec, new_nsec = tv->tv_nsec;
-	unsigned long flags;
-	u64 new_xsec;
-	unsigned long tb_delta;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irqsave(&xtime_lock, flags);
-
-	/*
-	 * Updating the RTC is not the job of this code. If the time is
-	 * stepped under NTP, the RTC will be updated after STA_UNSYNC
-	 * is cleared.  Tools like clock/hwclock either copy the RTC
-	 * to the system time, in which case there is no point in writing
-	 * to the RTC again, or write to the RTC but then they don't call
-	 * settimeofday to perform this operation.
-	 */
-#ifdef CONFIG_PPC_ISERIES
-	if (firmware_has_feature(FW_FEATURE_ISERIES) && first_settimeofday) {
-		iSeries_tb_recal();
-		first_settimeofday = 0;
-	}
-#endif
-
-	/* Make userspace gettimeofday spin until we're done. */
-	++vdso_data->tb_update_count;
-	smp_mb();
-
-	/*
-	 * Subtract off the number of nanoseconds since the
-	 * beginning of the last tick.
-	 */
-	tb_delta = tb_ticks_since(tb_last_jiffy);
-	tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */
-	new_nsec -= SCALE_XSEC(tb_delta, 1000000000);
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
-
- 	set_normalized_timespec(&xtime, new_sec, new_nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	/* In case of a large backwards jump in time with NTP, we want the 
-	 * clock to be updated as soon as the PLL is again in lock.
-	 */
-	last_rtc_update = new_sec - 658;
-
-	ntp_clear();
-
-	new_xsec = xtime.tv_nsec;
-	if (new_xsec != 0) {
-		new_xsec *= XSEC_PER_SEC;
-		do_div(new_xsec, NSEC_PER_SEC);
-	}
-	new_xsec += (u64)xtime.tv_sec * XSEC_PER_SEC;
-	update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
-
-	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
-	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
 static int __init get_freq(char *name, int cells, unsigned long *val)
 {
 	struct device_node *cpu;
@@ -878,6 +772,78 @@ unsigned long get_boot_time(void)
 		      tm.tm_hour, tm.tm_min, tm.tm_sec);
 }
 
+/* clocksource code */
+static cycle_t timebase_read(void)
+{
+	return (cycle_t)get_tb();
+}
+
+static void clocksource_settimeofday(struct clocksource *cs,
+                                     struct timespec *ts)
+{
+	u64 new_xsec;
+
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES) && first_settimeofday) {
+		iSeries_tb_recal();
+		first_settimeofday = 0;
+	}
+#endif
+
+	/* Make userspace gettimeofday spin until we're done. */
+	++vdso_data->tb_update_count;
+	smp_mb();
+
+	/* In case of a large backwards jump in time with NTP, we want the
+	 * clock to be updated as soon as the PLL is again in lock.
+	 */
+	last_rtc_update = xtime.tv_sec - 658;
+
+	new_xsec = xtime.tv_nsec;
+	if (new_xsec != 0) {
+		new_xsec *= XSEC_PER_SEC;
+		do_div(new_xsec, NSEC_PER_SEC);
+	}
+
+	new_xsec += (u64)xtime.tv_sec * XSEC_PER_SEC;
+
+	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
+	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
+
+	update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
+}
+
+void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
+{
+	timer_recalc_offset(tb_last_jiffy);
+	timer_check_rtc();
+}
+
+void __init clocksource_init(void)
+{
+	int mult;
+
+	if (__USE_RTC())
+		return;
+
+	mult = clocksource_hz2mult(tb_ticks_per_sec,
+	                           clocksource_timebase.shift);
+	clocksource_timebase.mult = mult;
+
+	clocksource_timebase.read = timebase_read;
+	clocksource_timebase.settimeofday = clocksource_settimeofday;
+
+	if (clocksource_register(&clocksource_timebase)) {
+		printk(KERN_ERR "clocksource: %s is already registered\n",
+		       clocksource_timebase.name);
+		return;
+	}
+
+	printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
+	       clocksource_timebase.name,
+	       clocksource_timebase.mult, clocksource_timebase.shift);
+}
+
 /* This function is only called on the boot processor */
 void __init time_init(void)
 {
@@ -999,6 +965,9 @@ void __init time_init(void)
 	                        -xtime.tv_sec, -xtime.tv_nsec);
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
+	/* Register the clocksource */
+	clocksource_init();
+
 	/* Not exact, but the timer interrupt takes care of this */
 	set_dec(tb_ticks_per_jiffy);
 }
Yours Tony

  linux.conf.au        http://linux.conf.au/ || http://lca2008.linux.org.au/
  Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists