| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070621000642.GA28972@havoc.gtf.org>
Date: Wed, 20 Jun 2007 20:06:42 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 2 +-
drivers/ata/libata-core.c | 4 +++-
drivers/ata/pata_amd.c | 2 ++
drivers/ata/pata_it821x.c | 13 ++++---------
4 files changed, 10 insertions(+), 11 deletions(-)
Bartlomiej Zolnierkiewicz (1):
pata_it821x: (partially) fix DMA in RAID mode
Henrik Kretzschmar (1):
kerneldoc fix in libata
Peer Chen (1):
PATA: Add the MCP73/77 support to PATA driver
Stas Sergeev (1):
fix module_param mistake in it821x
Tejun Heo (2):
libata: more NONCQ devices
ahci: fix PORTS_IMPL override
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 545f330..ca5229d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -527,7 +527,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
/* fixup zero port_map */
if (!port_map) {
- port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1;
+ port_map = (1 << ahci_nr_ports(cap)) - 1;
dev_printk(KERN_WARNING, &pdev->dev,
"PORTS_IMPL is zero, forcing 0x%x\n", port_map);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 047eabd..adfae9d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3659,7 +3659,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
/**
* ata_dev_reread_id - Re-read IDENTIFY data
- * @adev: target ATA device
+ * @dev: target ATA device
* @readid_flags: read ID flags
*
* Re-read IDENTIFY page and make sure @dev is still attached to
@@ -3802,6 +3802,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
/* Drives which do spurious command completion */
{ "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, },
+ { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
+ { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b439351..a16f629 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -693,6 +693,8 @@ static const struct pci_device_id amd[] = {
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 8 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 8 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 },
{ },
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index b3456d7..dab4e7c 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -2,6 +2,7 @@
* pata_it821x.c - IT821x PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@...hat.com>
+ * (C) 2007 Bartlomiej Zolnierkiewicz
*
* based upon
*
@@ -79,7 +80,7 @@
#define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.6"
+#define DRV_VERSION "0.3.7"
struct it821x_dev
{
@@ -460,14 +461,8 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused)
{
- int dma_enabled = 0;
int i;
- /* Bits 5 and 6 indicate if DMA is active on master/slave */
- /* It is possible that BMDMA isn't allocated */
- if (ap->ioaddr.bmdma_addr)
- dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_enabled(dev)) {
@@ -476,7 +471,7 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
dev->dma_mode = XFER_MW_DMA_0;
/* We do need the right mode information for DMA or PIO
and this comes from the current configuration flags */
- if (dma_enabled & (1 << (5 + i))) {
+ if (ata_id_has_dma(dev->id)) {
ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
dev->xfer_mode = XFER_MW_DMA_0;
dev->xfer_shift = ATA_SHIFT_MWDMA;
@@ -799,7 +794,7 @@ MODULE_VERSION(DRV_VERSION);
module_param_named(noraid, it8212_noraid, int, S_IRUGO);
-MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode");
+MODULE_PARM_DESC(noraid, "Force card into bypass mode");
module_init(it821x_init);
module_exit(it821x_exit);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists