[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <467B0F75.5020900@shaw.ca>
Date: Thu, 21 Jun 2007 17:53:25 -0600
From: Robert Hancock <hancockr@...w.ca>
To: "Fortier,Vincent [Montreal]" <Vincent.Fortier1@...GC.CA>
Cc: linux-kernel@...r.kernel.org
Subject: Re: Broadcom (bnx2) on PE1950/2950 failure
Fortier,Vincent [Montreal] wrote:
> Here is part of the dmesg:
> [root@...alhost /root]# dmesg | grep -i eth
> [ 119.196375] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
> v1.5.8.1 (May 7, 2007)
> [ 119.215023] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X
> 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 0019b9c8eedc
> [ 119.246853] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X
> 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 0019b9c8eede
> [ 119.458598] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
> Connection
> [ 119.654095] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network
> Connection
> [ 266.513144] bnx2: eth3: using MSI
> [ 269.638237] bnx2: eth3 NIC Link is Up, 1000 Mbps full duplex, receive
> & transmit flow control ON
> [ 290.242533] eth3: no IPv6 routers present
>
> As you can notice it tried to use eth0 & eth1 for both broadcom adapters
> but it did not worked properly since e1000 used them instead and finally
> bnx2 got eth3 working using MSI ?
Huh? eth0 and eth1 are the e1000 adapters, eth3 (and presumably eth2)
are the bnx2 adapters..
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@...pamshaw.ca
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists