0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0c)
	Subsystem: Compaq Computer Corporation: Unknown device 3200
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [40] #09 [4105]

0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 0c) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 0x10 (64 bytes)
	Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
		Address: fee00000  Data: 0000
	Capabilities: [64] #10 [0041]

0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 0c) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 0x10 (64 bytes)
	Bus: primary=00, secondary=06, subordinate=0c, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
		Address: fee00000  Data: 0000
	Capabilities: [64] #10 [0041]

0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 0c) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 0x10 (64 bytes)
	Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
		Address: fee00000  Data: 0000
	Capabilities: [64] #10 [0041]

0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, Cache Line Size: 0x10 (64 bytes)
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: fdf00000-fdffffff
	Prefetchable memory behind bridge: 00000000e2000000-00000000e2000000
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] PCI-X bridge device.
		Secondary Status: 64bit+, 133MHz-, SCD-, USC-, SCO-, SRD- Freq=1
		Status: Bus=0 Dev=28 Func=0 64bit+ 133MHz- SCD- USC-, SCO-, SRD-
		: Upstream: Capacity=65535, Commitment Limit=0
		: Downstream: Capacity=65535, Commitment Limit=0

0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
	Subsystem: Compaq Computer Corporation: Unknown device 3201
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 5000 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
	Subsystem: Compaq Computer Corporation: Unknown device 3201
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 5020 [size=32]

0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 3201
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=16]

0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
	Subsystem: Compaq Computer Corporation: Unknown device 3201
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [50] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=0
		Status: Bus=0 Dev=29 Func=5 64bit+ 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: Compaq Computer Corporation: Unknown device 3201
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] #0a [2080]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 00001000-00003fff
	Memory behind bridge: fbf00000-fcffffff
	Prefetchable memory behind bridge: e2100000-e21fffff
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Compaq Computer Corporation: Unknown device 3201
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at <ignored>
	Region 1: I/O ports at <ignored>
	Region 2: I/O ports at <ignored>
	Region 3: I/O ports at <ignored>
	Region 4: I/O ports at 0500 [size=16]
	Region 5: Memory at e2200000 (32-bit, non-prefetchable) [size=1K]

0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
	Subsystem: Compaq Computer Corporation: Unknown device 001e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at 3000 [size=256]
	Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at e2100000 [disabled] [size=128K]
	Capabilities: [5c] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
	Subsystem: Compaq Computer Corporation: Unknown device b206
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 1800 [size=256]
	Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512]
	Capabilities: [f0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Processor (rev 01)
	Subsystem: Compaq Computer Corporation: Unknown device b206
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at 3400 [size=256]
	Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K]
	Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K]
	Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K]
	Expansion ROM at e2120000 [disabled] [size=64K]
	Capabilities: [f0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

0000:02:01.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01)
	Subsystem: Compaq Computer Corporation: Unknown device 4091
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=8K]
	Region 2: I/O ports at 4000 [size=256]
	Region 3: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
	Expansion ROM at e2000000 [disabled] [size=256K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [dc] PCI-X non-bridge device.
		Command: DPERE- ERO+ RBC=0 OST=4
		Status: Bus=2 Dev=1 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=4, DMCRS=2, RSCEM-
	Capabilities: [f0] Vital Product Data

0000:02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
	Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (16000ns min), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at fdf70000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] 	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
		Address: 7afffd25fbf79f6c  Data: 7fdc

0000:02:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
	Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (16000ns min), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin B routed to IRQ 26
	Region 0: Memory at fdf60000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] 	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
		Address: 0408d1a0bbaf2020  Data: 8c80

0000:06:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 0x10 (64 bytes)
	Bus: primary=06, secondary=07, subordinate=09, sec-latency=64
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [44] #10 [0071]
	Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [6c] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d8] 
0000:06:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 0x10 (64 bytes)
	Bus: primary=06, secondary=0a, subordinate=0c, sec-latency=64
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [44] #10 [0071]
	Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [6c] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d8]