Linux version 2.6.21.5-64 (root@fish1) (gcc version 4.1.2 (Gentoo 4.1.2)) #3 SMP PREEMPT Fri Jun 29 00:09:17 CEST 2007 Command line: auto BOOT_IMAGE=Lin64-2.6.21.5 ro root=900 rootflags=data=journal BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Entering add_active_range(0, 0, 160) 0 entries of 256 used Entering add_active_range(0, 256, 851880) 1 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used end_pfn_map = 1245184 DMI 2.4 present. ACPI: RSDP 000F2620, 0024 (r2 DELL ) ACPI: XSDT 000F26A0, 004C (r1 DELL PE_SC3 1 DELL 1) ACPI: FACP 000F27A8, 00F4 (r3 DELL PE_SC3 1 DELL 1) ACPI: DSDT CFFA8000, 3C53 (r1 DELL PE_SC3 1 MSFT 100000E) ACPI: FACS CFFB7C00, 0040 ACPI: APIC 000F289C, 00C8 (r1 DELL PE_SC3 1 DELL 1) ACPI: SPCR 000F297D, 0050 (r1 DELL PE_SC3 1 DELL 1) ACPI: HPET 000F29CD, 0038 (r1 DELL PE_SC3 1 DELL 1) ACPI: MCFG 000F2A05, 003C (r1 DELL PE_SC3 1 DELL 1) Entering add_active_range(0, 0, 160) 0 entries of 256 used Entering add_active_range(0, 256, 851880) 1 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1245184 early_node_map[3] active PFN ranges 0: 0 -> 160 0: 256 -> 851880 0: 1048576 -> 1245184 On node 0 totalpages: 1048392 DMA zone: 56 pages used for memmap DMA zone: 1367 pages reserved DMA zone: 2577 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833504 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec81000] gsi_base[64]) IOAPIC[1]: apic_id 5, address 0xfec81000, GSI 64-87 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 00000000000a0000 - 0000000000100000 Nosave address range: 00000000cffa8000 - 00000000cffb7000 Nosave address range: 00000000cffb7000 - 00000000cffb8000 Nosave address range: 00000000cffb8000 - 00000000d0000000 Nosave address range: 00000000d0000000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fe000000 Nosave address range: 00000000fe000000 - 0000000100000000 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 24384 bytes of per cpu data Built 1 zonelists. Total pages: 1030001 Kernel command line: auto BOOT_IMAGE=Lin64-2.6.21.5 ro root=900 rootflags=data=journal Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 time.c: Detected 1994.999 MHz processor. Console: colour VGA+ 80x30 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x58d4000 - 0x98d4000 Memory: 4047360k/4980736k available (3126k kernel code, 146000k reserved, 1501k data, 220k init) Calibrating delay using timer specific routine.. 3992.36 BogoMIPS (lpj=1996180) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 20781239 Detected 20.781 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995001) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995011) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#2]: passed. SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=1995007) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs migration_cost=20,2604 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort. PCI: Probing PCI hardware (bus 00) PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:0f:0d.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 *5 6 7 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized libata version 2.20 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz pnp: 00:08: ioport range 0x800-0x87f has been reserved Time: tsc clocksource has been installed. pnp: 00:08: ioport range 0x880-0x8bf has been reserved pnp: 00:08: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:08: ioport range 0xc00-0xc7f has been reserved pnp: 00:08: ioport range 0xca0-0xca7 has been reserved pnp: 00:08: ioport range 0xca9-0xcab has been reserved pnp: 00:08: ioport range 0xcad-0xcaf has been reserved pnp: 00:09: ioport range 0xca8-0xca8 has been reserved pnp: 00:09: ioport range 0xcac-0xcac has been reserved pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f2000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: e000-efff MEM window: fc400000-fc5fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: e000-efff MEM window: fc300000-fc5fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fc100000-fc2fffff PREFETCH window: d8000000-dfffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:05:00.0 to 64 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:06:00.0 to 64 PCI: Setting latency timer of device 0000:07:00.0 to 64 ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:06:01.0 to 64 PCI: Setting latency timer of device 0000:05:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:05:00.0 to 64 Allocate Port Service[0000:05:00.0:pcie10] Allocate Port Service[0000:05:00.0:pcie11] PCI: Setting latency timer of device 0000:06:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:06:00.0:pcie20] Allocate Port Service[0000:06:00.0:pcie21] PCI: Setting latency timer of device 0000:06:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:06:01.0:pcie20] Allocate Port Service[0000:06:01.0:pcie21] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:02.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:03.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:04.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:05.0:pcie01 failed with error 1 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:06.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:07.0:pcie01 failed with error 1 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy intel_rng: FWH not detected Linux agpgart interface v0.102 (c) Dave Jones ipmi message handler version 39.1 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) IPMI kcs interface initialized IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0x2A2 prod 0x100 IPMI poweroff: Found a chassis style poweroff function Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found loop: loaded (max 8 devices) Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.8.1 (May 7, 2007) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 0019b9e2a6e9 ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 17, node addr 0019b9e2a6eb netconsole: not configured, aborting st: Version 20070203, fixed bufsize 32768, s/g segs 256 ata_piix 0000:00:1f.1: version 2.10ac1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14 ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15 scsi0 : ata_piix ata1.00: ATAPI, max UDMA/33 ata1.00: configured for UDMA/33 scsi1 : ata_piix ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM SONY DVD-ROM DDU810A KD38 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata3: SATA max UDMA/133 cmd 0x000000000001cc98 ctl 0x000000000001cc92 bmdma 0x000000000001cc60 irq 23 ata4: SATA max UDMA/133 cmd 0x000000000001cc80 ctl 0x000000000001cc7a bmdma 0x000000000001cc68 irq 23 scsi2 : ata_piix ATA: abnormal status 0x7F on port 0x000000000001cc9f scsi3 : ata_piix ATA: abnormal status 0x7F on port 0x000000000001cc87 Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 Fusion MPT FC Host driver 3.04.04 Fusion MPT SAS Host driver 3.04.04 ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 64 (level, low) -> IRQ 64 mptbase: Initiating ioc0 bringup ioc0: SAS1068: Capabilities={Initiator} scsi4 : ioc0: LSISAS1068, FwRev=000a3100h, Ports=1, MaxQ=366, IRQ=64 scsi 4:0:0:0: Direct-Access ATA ST3500630NS E PQ: 0 ANSI: 5 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 73 00 00 08 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 73 00 00 08 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 4:0:0:0: Attached scsi disk sda sd 4:0:0:0: Attached scsi generic sg1 type 0 scsi 4:0:1:0: Direct-Access ATA ST3500630NS E PQ: 0 ANSI: 5 SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 73 00 00 08 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 73 00 00 08 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 4:0:1:0: Attached scsi disk sdb sd 4:0:1:0: Attached scsi generic sg2 type 0 Fusion MPT misc device (ioctl) driver 3.04.04 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-1 input: USB Keyboard as /class/input/input2 input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid1 personality registered for level 1 raid6: int64x1 1746 MB/s raid6: int64x2 2152 MB/s raid6: int64x4 2148 MB/s raid6: int64x8 1472 MB/s raid6: sse2x1 2644 MB/s raid6: sse2x2 4957 MB/s raid6: sse2x4 6085 MB/s raid6: using algorithm sse2x4 (6085 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 6792.000 MB/sec raid5: using function: generic_sse (6792.000 MB/sec) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded EDAC MC: Ver: 2.0.1 Jun 29 2007 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:08.0 to 64 Intel(R) I/OAT DMA Engine found, 4 channels Netfilter messages via NETLINK v0.30. ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found md: Autodetecting RAID arrays. md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: sdb3 has different UUID to sdb4 md: sdb2 has different UUID to sdb4 md: adding sda4 ... md: sda3 has different UUID to sdb4 md: sda2 has different UUID to sdb4 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: created md15 md: bind md: bind md: running: raid1: raid set md15 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: adding sda2 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with journal data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed EXT3 FS on md0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with journal data mode. Adding 8000248k swap on /dev/md15. Priority:8192 extents:1 across:8000248k bonding: bond0: setting mode to active-backup (1). bonding: bond0: Setting MII monitoring interval to 100. ADDRCONF(NETDEV_UP): bond0: link is not ready bonding: bond0: Adding slave eth0. bnx2: eth0: using MSI ADDRCONF(NETDEV_UP): eth0: link is not ready bonding: bond0: enslaving eth0 as a backup interface with a down link. bonding: bond0: Adding slave eth1. bnx2: eth1: using MSI ADDRCONF(NETDEV_UP): eth1: link is not ready bonding: bond0: enslaving eth1 as a backup interface with a down link. bonding: bond0: Setting eth1 as primary slave. bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready bonding: bond0: link status definitely up for interface eth0. bonding: bond0: making interface eth0 the new active one. bonding: bond0: first active interface up! ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready eth0: no IPv6 routers present bond0: no IPv6 routers present