| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070703155417.11d81c75@the-village.bc.nu>
Date: Tue, 3 Jul 2007 15:54:17 +0100
From: Alan Cox <alan@...rguk.ukuu.org.uk>
To: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
jeff@...zik.org
Subject: [PATCH] libata_acpi: A different strategy for using ACPI
information
Lots of BIOSen simply return the BIOS set modes via the ACPI methods and
pass back the values you give it across suspend/resume. Thus instead of
trying to do clever stuff with this data we instead use it as a way to
take a sneak peak at cable type information when viable. This should help
us catch more of the laptops that do weird stuff, the VIA SATA bridges
and the totally horked Nvidia cable handling.
For now its only used by the VIA and AMD/NV driver until we get a better
idea of whether this is a sensible idea or not.
Opinions ?
Signed-off-by: Alan Cox <alan@...hat.com>
diff -u --new-file --exclude-from /usr/src/exclude --recursive linux.vanilla-2.6.22-rc6-mm1/drivers/ata/libata-acpi.c linux-2.6.22-rc6-mm1/drivers/ata/libata-acpi.c
--- linux.vanilla-2.6.22-rc6-mm1/drivers/ata/libata-acpi.c 2007-07-02 20:50:11.000000000 +0100
+++ linux-2.6.22-rc6-mm1/drivers/ata/libata-acpi.c 2007-07-02 21:02:24.000000000 +0100
@@ -296,6 +296,44 @@
}
/**
+ * ata_acpi_cbl_80wire - Check for 80 wire cable
+ * @ap: Port to check
+ *
+ * Return 1 if the ACPI mode data for this port indicates the BIOS selected
+ * an 80wire mode.
+ */
+
+int ata_acpi_cbl_80wire(struct ata_port *ap)
+{
+ struct ata_acpi_gtm gtm;
+ int valid = 0;
+
+ /* No _GTM data, no information */
+ if (ata_acpi_gtm(ap, >m) < 0)
+ return 0;
+
+ /* Split timing, DMA enabled */
+ if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55)
+ valid |= 1;
+ if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55)
+ valid |= 2;
+ /* Shared timing, DMA enabled */
+ if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55)
+ valid |= 1;
+ if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55)
+ valid |= 2;
+
+ /* Drive check */
+ if ((valid & 1) && ata_dev_enabled(&ap->device[0]))
+ return 1;
+ if ((valid & 2) && ata_dev_enabled(&ap->device[1]))
+ return 1;
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+
+/**
* taskfile_load_raw - send taskfile registers to host controller
* @dev: target ATA device
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
diff -u --new-file --exclude-from /usr/src/exclude --recursive linux.vanilla-2.6.22-rc6-mm1/include/linux/libata.h linux-2.6.22-rc6-mm1/include/linux/libata.h
--- linux.vanilla-2.6.22-rc6-mm1/include/linux/libata.h 2007-07-02 20:50:14.000000000 +0100
+++ linux-2.6.22-rc6-mm1/include/linux/libata.h 2007-07-02 21:29:18.000000000 +0100
@@ -867,6 +872,13 @@
ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
};
+/* libata-acpi.c */
+#ifdef CONFIG_ATA_ACPI
+extern int ata_acpi_cbl_80wire(struct ata_port *ap);
+#else
+static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
+#endif
+
#ifdef CONFIG_PCI
struct pci_bits {
diff -u --new-file --exclude-from /usr/src/exclude --recursive linux.vanilla-2.6.22-rc6-mm1/drivers/ata/pata_amd.c linux-2.6.22-rc6-mm1/drivers/ata/pata_amd.c
--- linux.vanilla-2.6.22-rc6-mm1/drivers/ata/pata_amd.c 2007-07-02 20:50:11.000000000 +0100
+++ linux-2.6.22-rc6-mm1/drivers/ata/pata_amd.c 2007-07-02 21:03:00.000000000 +0100
@@ -268,6 +268,9 @@
pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
cbl = ATA_CBL_PATA80;
+ /* And a triple check across suspend/resume with ACPI around */
+ if (ata_acpi_cbl_80wire(ap))
+ cbl = ATA_CBL_PATA80;
return cbl;
}
diff -u --new-file --exclude-from /usr/src/exclude --recursive linux.vanilla-2.6.22-rc6-mm1/drivers/ata/pata_via.c linux-2.6.22-rc6-mm1/drivers/ata/pata_via.c
--- linux.vanilla-2.6.22-rc6-mm1/drivers/ata/pata_via.c 2007-07-02 20:48:49.000000000 +0100
+++ linux-2.6.22-rc6-mm1/drivers/ata/pata_via.c 2007-07-02 21:04:59.000000000 +0100
@@ -180,6 +180,9 @@
two drives */
if (ata66 & (0x10100000 >> (16 * ap->port_no)))
return ATA_CBL_PATA80;
+ /* Check with ACPI so we can spot BIOS reported SATA bridges */
+ if (ata_acpi_cbl_80wire(ap))
+ return ATA_CBL_PATA80;
return ATA_CBL_PATA40;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists