| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070703155519.GY22589@skl-net.de>
Date: Tue, 3 Jul 2007 17:55:19 +0200
From: Andre Noll <maan@...temlinux.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Ingo Molnar <mingo@...e.hu>
Subject: Re: Linux 2.6.22-rc7
On 14:32, Linus Torvalds wrote:
>
> Ok, Linux-2.6.22-rc7 is out there.
>
> Final testing always appreciated, of course,
There seems to be a locking problem:
[ INFO: inconsistent lock state ]
Full dmesg and .config below.
Have fun
Andre
[ 0.000000] Linux version 2.6.22-rc7 (root@...ngho2) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #44 SMP Tue Jul 3 17:39:10 CEST 2007
[ 0.000000] Command line:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000f57f8000 (usable)
[ 0.000000] BIOS-e820: 00000000f57f8000 - 00000000f5800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fdc00000 - 00000000fdc01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fdc10000 - 00000000fdc11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013ffff000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 1005560) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1310719) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1310719
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F4F20, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT F57F83E0, 0044 (r1 HP A05 2 Ò. 162E)
[ 0.000000] ACPI: FACP F57F8460, 00F4 (r3 HP A05 2 Ò. 162E)
[ 0.000000] ACPI: DSDT F57F8560, 422D (r1 HP DSDT 1 MSFT 2000001)
[ 0.000000] ACPI: FACS F57F80C0, 0040
[ 0.000000] ACPI: APIC F57F8100, 00B8 (r1 HP 00000083 2 0)
[ 0.000000] ACPI: SPCR F57F81E0, 0050 (r1 HP SPCRRBSU 1 Ò. 162E)
[ 0.000000] ACPI: SRAT F57F8260, 0150 (r1 HP A05 1 0)
[ 0.000000] SRAT: PXM 1 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 2 -> Node 1
[ 0.000000] ACPI: [SRAT:0x00] ignored 4 entries of 8 found
[ 0.000000] SRAT: Node 0 PXM 1 0-c0000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786432) 1 entries of 3200 used
[ 0.000000] SRAT: Node 1 PXM 2 c0000000-140000000
[ 0.000000] Entering add_active_range(1, 786432, 1005560) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(1, 1048576, 1310719) 3 entries of 3200 used
[ 0.000000] NUMA: Using 30 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000c0000000
[ 0.000000] Bootmem setup node 1 00000000c0000000-000000013ffff000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1310719
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 786432
[ 0.000000] 1: 786432 -> 1005560
[ 0.000000] 1: 1048576 -> 1310719
[ 0.000000] On node 0 totalpages: 786335
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 2674 pages reserved
[ 0.000000] DMA zone: 1237 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16808 pages used for memmap
[ 0.000000] DMA32 zone: 765528 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] On node 1 totalpages: 481271
[ 0.000000] DMA zone: 0 pages used for memmap
[ 0.000000] DMA32 zone: 5632 pages used for memmap
[ 0.000000] DMA32 zone: 213496 pages, LIFO batch:31
[ 0.000000] Normal zone: 5631 pages used for memmap
[ 0.000000] Normal zone: 256512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] Processor #2
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] Processor #3
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, address 0xfec10000, GSI 24-27
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 6, address 0xfec20000, GSI 28-31
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32])
[ 0.000000] IOAPIC[3]: apic_id 7, address 0xfdc00000, GSI 32-35
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36])
[ 0.000000] IOAPIC[4]: apic_id 8, address 0xfdc10000, GSI 36-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at f6000000 (gap: f5800000:8400000)
[ 0.000000] PERCPU: Allocating 34344 bytes of per cpu data
[ 0.000000] Built 2 zonelists. Total pages: 1236773
[ 0.000000] Kernel command line:
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 87.620888] time.c: Detected 2205.040 MHz processor.
[ 87.623692] Console: colour VGA+ 80x25
[ 87.633167] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 87.633353] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 87.633477] ... MAX_LOCK_DEPTH: 30
[ 87.633615] ... MAX_LOCKDEP_KEYS: 2048
[ 87.633740] ... CLASSHASH_SIZE: 1024
[ 87.633867] ... MAX_LOCKDEP_ENTRIES: 8192
[ 87.633992] ... MAX_LOCKDEP_CHAINS: 16384
[ 87.634118] ... CHAINHASH_SIZE: 8192
[ 87.634246] memory used by lock dependency info: 1648 kB
[ 87.634378] per task-struct memory footprint: 1680 bytes
[ 87.634511] ------------------------
[ 87.634652] | Locking API testsuite:
[ 87.634774] ----------------------------------------------------------------------------
[ 87.634972] | spin |wlock |rlock |mutex | wsem | rsem |
[ 87.635163] --------------------------------------------------------------------------
[ 87.635356] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 87.636822] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 87.638329] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 87.639935] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 87.641538] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 87.643245] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 87.644944] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 87.646652] double unlock: ok | ok | ok | ok | ok | ok |
[ 87.648081] initialize held: ok | ok | ok | ok | ok | ok |
[ 87.649493] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 87.651022] --------------------------------------------------------------------------
[ 87.651210] recursive read-lock: | ok | | ok |
[ 87.651967] recursive read-lock #2: | ok | | ok |
[ 87.652730] mixed read-write-lock: | ok | | ok |
[ 87.653486] mixed write-read-lock: | ok | | ok |
[ 87.654202] --------------------------------------------------------------------------
[ 87.654355] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 87.655105] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 87.655852] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 87.656607] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 87.657352] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 87.658094] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 87.658837] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 87.659604] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 87.660349] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 87.661090] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 87.661834] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 87.662616] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 87.663410] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 87.664193] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 87.664978] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 87.665762] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 87.666547] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 87.667310] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 87.668061] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 87.668799] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 87.669541] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 87.670288] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 87.671051] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 87.671802] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 87.672568] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 87.673315] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 87.674069] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 87.674848] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 87.675603] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 87.676347] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 87.677096] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 87.677844] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 87.678599] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 87.679354] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 87.680103] hard-irq lock-inversion/123: ok | ok | ok |
[ 87.680853] soft-irq lock-inversion/123: ok | ok | ok |
[ 87.681609] hard-irq lock-inversion/132: ok | ok | ok |
[ 87.682356] soft-irq lock-inversion/132: ok | ok | ok |
[ 87.683123] hard-irq lock-inversion/213: ok | ok | ok |
[ 87.683873] soft-irq lock-inversion/213: ok | ok | ok |
[ 87.684629] hard-irq lock-inversion/231: ok | ok | ok |
[ 87.685373] soft-irq lock-inversion/231: ok | ok | ok |
[ 87.686124] hard-irq lock-inversion/312: ok | ok | ok |
[ 87.686882] soft-irq lock-inversion/312: ok | ok | ok |
[ 87.687638] hard-irq lock-inversion/321: ok | ok | ok |
[ 87.688383] soft-irq lock-inversion/321: ok | ok | ok |
[ 87.689136] hard-irq read-recursion/123: ok |
[ 87.689494] soft-irq read-recursion/123: ok |
[ 87.689854] hard-irq read-recursion/132: ok |
[ 87.690213] soft-irq read-recursion/132: ok |
[ 87.690574] hard-irq read-recursion/213: ok |
[ 87.690943] soft-irq read-recursion/213: ok |
[ 87.691302] hard-irq read-recursion/231: ok |
[ 87.691660] soft-irq read-recursion/231: ok |
[ 87.692019] hard-irq read-recursion/312: ok |
[ 87.694075] soft-irq read-recursion/312: ok |
[ 87.694435] hard-irq read-recursion/321: ok |
[ 87.694794] soft-irq read-recursion/321: ok |
[ 87.695165] -------------------------------------------------------
[ 87.695279] Good, all 218 testcases passed! |
[ 87.695384] ---------------------------------
[ 87.695491] Checking aperture...
[ 87.695593] CPU 0: aperture @ 8000000 size 32 MB
[ 87.695700] Aperture too small (32 MB)
[ 87.702640] No AGP bridge found
[ 87.702741] Your BIOS doesn't leave a aperture memory hole
[ 87.702860] Please enable the IOMMU option in the BIOS setup
[ 87.702971] This costs you 64 MB of RAM
[ 87.740264] Mapping aperture over 65536 KB of RAM @ 8000000
[ 87.815122] Memory: 4883760k/5242876k available (3302k kernel code, 186664k reserved, 1521k data, 1532k init)
[ 87.815386] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=2
[ 87.894669] Calibrating delay using timer specific routine.. 4415.30 BogoMIPS (lpj=8830606)
[ 87.895725] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 87.901342] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 87.904020] Mount-cache hash table entries: 256
[ 87.904760] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 87.904878] CPU: L2 Cache: 1024K (64 bytes/line)
[ 87.904986] CPU 0/0 -> Node 0
[ 87.905086] CPU: Physical Processor ID: 0
[ 87.905190] CPU: Processor Core ID: 0
[ 87.905306] Freeing SMP alternatives: 26k freed
[ 87.905657] ACPI: Core revision 20070126
[ 87.949393] Using local APIC timer interrupts.
[ 87.994814] result 12528636
[ 87.994913] Detected 12.528 MHz APIC timer.
[ 87.998841] lockdep: not fixing up alternatives.
[ 87.999034] Booting processor 1/4 APIC 0x2
[ 88.009265] Initializing CPU#1
[ 88.086506] Calibrating delay using timer specific routine.. 4410.32 BogoMIPS (lpj=8820654)
[ 88.086514] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 88.086516] CPU: L2 Cache: 1024K (64 bytes/line)
[ 88.086519] CPU 1/2 -> Node 1
[ 88.086520] CPU: Physical Processor ID: 1
[ 88.086521] CPU: Processor Core ID: 0
[ 88.086530] AMD Opteron(tm) Processor 275 stepping 02
[ 88.090616] lockdep: not fixing up alternatives.
[ 88.091628] Booting processor 2/4 APIC 0x1
[ 88.101831] Initializing CPU#2
[ 88.182430] Calibrating delay using timer specific routine.. 4410.33 BogoMIPS (lpj=8820677)
[ 88.182436] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 88.182438] CPU: L2 Cache: 1024K (64 bytes/line)
[ 88.182440] CPU 2/1 -> Node 0
[ 88.182442] CPU: Physical Processor ID: 0
[ 88.182443] CPU: Processor Core ID: 1
[ 88.182450] AMD Opteron(tm) Processor 275 stepping 02
[ 88.186525] lockdep: not fixing up alternatives.
[ 88.187539] Booting processor 3/4 APIC 0x3
[ 88.197747] Initializing CPU#3
[ 88.278353] Calibrating delay using timer specific routine.. 4410.32 BogoMIPS (lpj=8820652)
[ 88.278360] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 88.278362] CPU: L2 Cache: 1024K (64 bytes/line)
[ 88.278365] CPU 3/3 -> Node 1
[ 88.278367] CPU: Physical Processor ID: 1
[ 88.278368] CPU: Processor Core ID: 1
[ 88.278377] AMD Opteron(tm) Processor 275 stepping 02
[ 88.282382] Brought up 4 CPUs
[ 89.763446] migration_cost=349,405
[ 89.764339] NET: Registered protocol family 16
[ 89.764791] ACPI: bus type pci registered
[ 89.764901] PCI: Using configuration type 1
[ 89.770927] ACPI: SSDT F57FD000, 059D (r1 HP SSDT0 1 MSFT 2000001)
[ 89.771430] ACPI: SSDT F57FD700, 059D (r1 HP SSDT1 1 MSFT 2000001)
[ 89.771921] ACPI: SSDT F57FDE00, 059D (r1 HP SSDT2 1 MSFT 2000001)
[ 89.772417] ACPI: SSDT F57FE500, 059D (r1 HP SSDT3 1 MSFT 2000001)
[ 89.772940]
[ 89.772943] =================================
[ 89.773194] [ INFO: inconsistent lock state ]
[ 89.773325] 2.6.22-rc7 #44
[ 89.773459] ---------------------------------
[ 89.773591] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
[ 89.773730] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[ 89.773862] (&n->list_lock){+-..}, at: [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.774314] {hardirq-on-W} state was registered at:
[ 89.774468] [<ffffffff8024c542>] __lock_acquire+0x152/0x1070
[ 89.774798] [<ffffffff8024dc61>] debug_check_no_locks_freed+0x101/0x1c0
[ 89.775139] [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.775471] [<ffffffff8024d82b>] lock_acquire+0x8b/0xc0
[ 89.775797] [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.776125] [<ffffffff805364f5>] _spin_lock+0x25/0x40
[ 89.776453] [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.776778] [<ffffffff80290dab>] kmem_cache_open+0x1db/0x300
[ 89.777108] [<ffffffff802912ea>] create_kmalloc_cache+0x6a/0xe0
[ 89.777459] [<ffffffff806f848c>] kmem_cache_init+0x3c/0x170
[ 89.777791] [<ffffffff806de7da>] start_kernel+0x21a/0x330
[ 89.778120] [<ffffffff806de124>] _sinittext+0x124/0x160
[ 89.778450] [<ffffffffffffffff>] 0xffffffffffffffff
[ 89.778772] irq event stamp: 4974
[ 89.778898] hardirqs last enabled at (4973): [<ffffffff80208257>] default_idle+0x37/0x60
[ 89.779220] hardirqs last disabled at (4974): [<ffffffff805360a1>] trace_hardirqs_off_thunk+0x35/0x67
[ 89.779549] softirqs last enabled at (4966): [<ffffffff80233753>] __do_softirq+0xf3/0x110
[ 89.779868] softirqs last disabled at (4959): [<ffffffff8020adcc>] call_softirq+0x1c/0x30
[ 89.780189]
[ 89.780190] other info that might help us debug this:
[ 89.780455] no locks held by swapper/0.
[ 89.780584]
[ 89.780584] stack backtrace:
[ 89.780814]
[ 89.780815] Call Trace:
[ 89.781046] <IRQ> [<ffffffff8024ae36>] print_usage_bug+0x186/0x1a0
[ 89.781256] [<ffffffff8024c26c>] mark_lock+0x49c/0x620
[ 89.781401] [<ffffffff8024ce47>] __lock_acquire+0xa57/0x1070
[ 89.781542] [<ffffffff8022804d>] run_rebalance_domains+0x3bd/0x4e0
[ 89.781684] [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.781819] [<ffffffff8024d82b>] lock_acquire+0x8b/0xc0
[ 89.781956] [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.782093] [<ffffffff805364f5>] _spin_lock+0x25/0x40
[ 89.782230] [<ffffffff80232f91>] _local_bh_enable+0x61/0xf0
[ 89.782371] [<ffffffff8028cd7c>] add_partial+0x1c/0x60
[ 89.782508] [<ffffffff8028f8a0>] deactivate_slab+0x60/0x150
[ 89.782646] [<ffffffff8028f9e0>] flush_cpu_slab+0x0/0x20
[ 89.782786] [<ffffffff8028f9b2>] flush_slab+0x22/0x30
[ 89.782921] [<ffffffff8028f9db>] __flush_cpu_slab+0x1b/0x20
[ 89.783061] [<ffffffff8028f9f1>] flush_cpu_slab+0x11/0x20
[ 89.783198] [<ffffffff802146df>] smp_call_function_interrupt+0x4f/0x80
[ 89.783341] [<ffffffff80208220>] default_idle+0x0/0x60
[ 89.783478] [<ffffffff8020a79b>] call_function_interrupt+0x6b/0x70
[ 89.783618] <EOI> [<ffffffff80208259>] default_idle+0x39/0x60
[ 89.783824] [<ffffffff80208257>] default_idle+0x37/0x60
[ 89.783962] [<ffffffff802082e1>] cpu_idle+0x61/0x90
[ 89.784098] [<ffffffff806eb10b>] start_secondary+0x25b/0x3c0
[ 89.784237]
[ 89.784363] ACPI: Interpreter enabled
[ 89.784486] ACPI: Using IOAPIC for interrupt routing
[ 89.789997] ACPI: PCI Root Bridge [CFG0] (0000:00)
[ 89.790133] PCI: Probing PCI hardware (bus 00)
[ 89.791509] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0._PRT]
[ 89.791713] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI0._PRT]
[ 89.791940] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI1._PRT]
[ 89.792133] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI2._PRT]
[ 89.795615] ACPI: PCI Root Bridge [CFG1] (0000:04)
[ 89.795725] PCI: Probing PCI hardware (bus 04)
[ 89.796234] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI3._PRT]
[ 89.796580] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI4._PRT]
[ 89.797543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 7 10 *11)
[ 89.798127] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 10 11) *15
[ 89.798767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 11) *0, disabled.
[ 89.799475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11)
[ 89.800071] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 89.800197] pnp: PnP ACPI init
[ 89.800305] ACPI: bus type pnp registered
[ 89.803924] pnp: PnP ACPI: found 10 devices
[ 89.804030] ACPI: ACPI bus type pnp unregistered
[ 89.804241] SCSI subsystem initialized
[ 89.804447] usbcore: registered new interface driver usbfs
[ 89.804605] usbcore: registered new interface driver hub
[ 89.804770] usbcore: registered new device driver usb
[ 89.804920] PCI: Using ACPI for IRQ routing
[ 89.805026] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 89.805559] PCI-DMA: Disabling AGP.
[ 89.806174] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 89.806290] PCI-DMA: using GART IOMMU.
[ 89.806418] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 89.806923] pnp: 00:01: ioport range 0x230-0x233 has been reserved
[ 89.807038] pnp: 00:01: ioport range 0x260-0x267 has been reserved
[ 89.807153] pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 89.807689] PCI: Bridge: 0000:00:03.0
[ 89.807794] IO window: 4000-4fff
[ 89.807900] MEM window: f5f00000-f7cfffff
[ 89.809133] Time: acpi_pm clocksource has been installed.
[ 89.809818] PREFETCH window: f8000000-f80fffff
[ 89.809929] PCI: Bridge: 0000:00:07.0
[ 89.810033] IO window: 5000-5fff
[ 89.810137] MEM window: f7d00000-f7dfffff
[ 89.810244] PREFETCH window: f8100000-f81fffff
[ 89.810357] PCI: Bridge: 0000:00:08.0
[ 89.810460] IO window: disabled.
[ 89.810564] MEM window: f7e00000-f7efffff
[ 89.810670] PREFETCH window: disabled.
[ 89.810806] PCI: Bridge: 0000:04:09.0
[ 89.810910] IO window: 6000-6fff
[ 89.811014] MEM window: f7f00000-f7ffffff
[ 89.811121] PREFETCH window: f8200000-f82fffff
[ 89.811230] PCI: Bridge: 0000:04:0a.0
[ 89.811333] IO window: disabled.
[ 89.811437] MEM window: disabled.
[ 89.811540] PREFETCH window: disabled.
[ 89.811679] NET: Registered protocol family 2
[ 89.853231] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 89.860639] TCP established hash table entries: 1048576 (order: 14, 67108864 bytes)
[ 89.912001] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 89.914865] TCP: Hash tables configured (established 1048576 bind 65536)
[ 89.914984] TCP reno registered
[ 89.963663] audit: initializing netlink socket (disabled)
[ 89.963800] audit(1183477398.296:1): initialized
[ 89.964041] Total HugeTLB memory allocated, 0
[ 89.967307] VFS: Disk quotas dquot_6.5.1
[ 89.967489] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 89.967916] SGI XFS with large block/inode numbers, no debug enabled
[ 89.968773] io scheduler noop registered
[ 89.968880] io scheduler anticipatory registered
[ 89.968993] io scheduler deadline registered
[ 89.969242] io scheduler cfq registered (default)
[ 90.009093] Boot video device is 0000:01:03.0
[ 90.009913] input: Power Button (FF) as /class/input/input0
[ 90.010028] ACPI: Power Button (FF) [PWRF]
[ 90.013849] Generic RTC Driver v1.07
[ 90.014030] AMD768 RNG detected
[ 90.014190] Linux agpgart interface v0.102 (c) Dave Jones
[ 90.014301] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 90.014932] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 90.015954] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 90.016105] HP CISS Driver (v 3.6.14)
[ 90.016303] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 24 (level, low) -> IRQ 24
[ 90.056853] cciss0: <0x46> at PCI 0000:02:04.0 IRQ 24 using DAC
[ 90.072830] blocks= 142253280 block_size= 512
[ 90.080824] heads=255, sectors=32, cylinders=17433
[ 90.080825]
[ 90.088817] blocks= 142253280 block_size= 512
[ 90.096810] heads=255, sectors=32, cylinders=17433
[ 90.096811]
[ 90.097131] blocks= 142253280 block_size= 512
[ 90.097322] heads=255, sectors=32, cylinders=17433
[ 90.097323]
[ 90.097526] cciss/c0d0: p1 p2 p3
[ 90.104488] blocks= 142253280 block_size= 512
[ 90.104687] heads=255, sectors=32, cylinders=17433
[ 90.104688]
[ 90.104894] cciss/c0d1: p1 p2 p3
[ 90.116935] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 90.117052] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 90.117254] AMD8111: IDE controller at PCI slot 0000:00:04.1
[ 90.117374] AMD8111: chipset revision 3
[ 90.117478] AMD8111: not 100% native mode: will probe irqs later
[ 90.117597] AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller
[ 90.117714] ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
[ 90.117982] Probing IDE interface ide0...
[ 90.912321] hda: TSSTcorpCD-ROM TS-L162C, ATAPI CD/DVD-ROM drive
[ 91.588684] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 91.591083] hda: ATAPI 24X CD-ROM drive, 96kB Cache, UDMA(33)
[ 91.591556] Uniform CD-ROM driver Revision: 3.20
[ 91.595730] Loading iSCSI transport class v2.0-724.
[ 91.595970] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 91.596198] ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19
[ 91.596791] ohci_hcd 0000:01:00.0: OHCI Host Controller
[ 91.597076] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 91.597249] ohci_hcd 0000:01:00.0: irq 19, io mem 0xf7cf0000
[ 91.657696] usb usb1: configuration #1 chosen from 1 choice
[ 91.657870] hub 1-0:1.0: USB hub found
[ 91.657982] hub 1-0:1.0: 3 ports detected
[ 91.763541] ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19
[ 91.763940] ohci_hcd 0000:01:00.1: OHCI Host Controller
[ 91.764213] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
[ 91.764379] ohci_hcd 0000:01:00.1: irq 19, io mem 0xf7ce0000
[ 91.825533] usb usb2: configuration #1 chosen from 1 choice
[ 91.825706] hub 2-0:1.0: USB hub found
[ 91.825818] hub 2-0:1.0: 3 ports detected
[ 91.931524] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 91.933222] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 91.933348] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 91.933561] mice: PS/2 mouse device common for all mice
[ 91.975617] input: AT Translated Set 2 keyboard as /class/input/input1
[ 91.980984] md: linear personality registered for level -1
[ 91.981098] md: raid0 personality registered for level 0
[ 91.981210] md: raid1 personality registered for level 1
[ 91.981384] usbcore: registered new interface driver hiddev
[ 91.981540] usbcore: registered new interface driver usbhid
[ 91.981654] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 91.981870] TCP cubic registered
[ 91.982052] NET: Registered protocol family 1
[ 91.982393] Freeing unused kernel memory: 1532k freed
[ 91.984338] Write protecting the kernel read-only data: 4500k
[ 92.001449] md: md0 stopped.
[ 92.033825] md: bind<cciss/c0d1p1>
[ 92.034308] md: bind<cciss/c0d0p1>
[ 92.034601] raid1: raid set md0 active with 2 out of 2 mirrors
[ 92.035827] md: md1 stopped.
[ 92.062523] md: bind<cciss/c0d1p2>
[ 92.062952] md: bind<cciss/c0d0p2>
[ 92.063208] raid1: raid set md1 active with 2 out of 2 mirrors
[ 92.064378] md: md2 stopped.
[ 92.076005] md: bind<cciss/c0d1p3>
[ 92.076437] md: bind<cciss/c0d0p3>
[ 92.076691] raid1: raid set md2 active with 2 out of 2 mirrors
[ 92.097676] kjournald starting. Commit interval 5 seconds
[ 92.097683] EXT3-fs: mounted filesystem with ordered data mode.
[ 94.860415] tg3.c:v3.77 (May 31, 2007)
[ 94.860638] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 28 (level, low) -> IRQ 28
[ 94.908955] eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:e4:5e:8a
[ 94.909465] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0]
[ 94.909615] eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 94.909750] ACPI: PCI Interrupt 0000:03:06.1[B] -> GSI 29 (level, low) -> IRQ 29
[ 94.910676] QLogic Fibre Channel HBA Driver
[ 94.956852] eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:e4:5e:89
[ 94.957796] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 94.958031] eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 94.958299] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 32 (level, low) -> IRQ 32
[ 94.958757] qla2xxx 0000:05:08.0: Found an ISP2422, irq 32, iobase 0xffffc200051d2000
[ 94.959189] qla2xxx 0000:05:08.0: Configuring PCI space...
[ 94.961756] qla2xxx 0000:05:08.0: Configure NVRAM parameters...
[ 94.968368] qla2xxx 0000:05:08.0: Verifying loaded RISC code...
[ 95.099707] PM: Writing back config space on device 0000:03:06.1 at offset b (was 164814e4, writing d00e11)
[ 95.099974] PM: Writing back config space on device 0000:03:06.1 at offset 3 (was 804000, writing 804010)
[ 95.100220] PM: Writing back config space on device 0000:03:06.1 at offset 2 (was 2000000, writing 2000010)
[ 95.100465] PM: Writing back config space on device 0000:03:06.1 at offset 1 (was 2b00000, writing 2b00146)
[ 95.184998] Adding 6540152k swap on /dev/md2. Priority:-1 extents:1 across:6540152k
[ 95.256439] qla2xxx 0000:05:08.0: Allocated (64 KB) for EFT...
[ 95.256708] qla2xxx 0000:05:08.0: Allocated (1413 KB) for firmware dump...
[ 95.276458] scsi0 : qla2xxx
[ 95.421174] EXT3 FS on md1, internal journal
[ 95.537798] qla2xxx 0000:05:08.0: LIP reset occured (f700).
[ 95.755814] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11)
[ 95.756020] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010)
[ 95.756182] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010)
[ 95.756343] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146)
[ 96.539625] qla2xxx 0000:05:08.0: LOOP UP detected (4 Gbps).
[ 96.601142] scsi 0:0:0:0: Direct-Access ADVUNI OXYGENRAID 424F 347A PQ: 0 ANSI: 5
[ 96.601849] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 96.602090] sd 0:0:0:0: [sda] 19529912320 512-byte hardware sectors (9999315 MB)
[ 96.602507] sd 0:0:0:0: [sda] Write Protect is off
[ 96.602626] sd 0:0:0:0: [sda] Mode Sense: 9b 00 00 08
[ 96.603020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 96.603406] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 96.603633] sd 0:0:0:0: [sda] 19529912320 512-byte hardware sectors (9999315 MB)
[ 96.604009] sd 0:0:0:0: [sda] Write Protect is off
[ 96.604119] sd 0:0:0:0: [sda] Mode Sense: 9b 00 00 08
[ 96.604492] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 96.604654] sda: unknown partition table
[ 96.605043] sd 0:0:0:0: [sda] Attached SCSI disk
[ 96.605196] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 96.605915] scsi 0:0:1:0: Direct-Access ADVUNI OXYGENRAID 424F 347A PQ: 0 ANSI: 5
[ 96.606450] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 96.606687] sd 0:0:1:0: [sdb] 19529912320 512-byte hardware sectors (9999315 MB)
[ 96.607058] sd 0:0:1:0: [sdb] Write Protect is off
[ 96.607169] sd 0:0:1:0: [sdb] Mode Sense: 9b 00 00 08
[ 96.607546] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 96.607869] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 96.608093] sd 0:0:1:0: [sdb] 19529912320 512-byte hardware sectors (9999315 MB)
[ 96.608446] sd 0:0:1:0: [sdb] Write Protect is off
[ 96.608557] sd 0:0:1:0: [sdb] Mode Sense: 9b 00 00 08
[ 96.608921] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 96.609081] sdb: unknown partition table
[ 96.609408] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 96.609553] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 96.611290] qla2xxx 0000:05:08.0:
[ 96.611291] QLogic Fibre Channel HBA Driver: 8.01.07-k7
[ 96.611293] QLogic HP AE369-60001 - QLA2340
[ 96.611294] ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:05:08.0 hdma+, host#=0, fw=4.00.27 [IP]
[ 96.611795] ACPI: PCI Interrupt 0000:05:08.1[B] -> GSI 33 (level, low) -> IRQ 33
[ 96.612057] qla2xxx 0000:05:08.1: Found an ISP2422, irq 33, iobase 0xffffc200051d8000
[ 96.612344] qla2xxx 0000:05:08.1: Configuring PCI space...
[ 96.614615] qla2xxx 0000:05:08.1: Configure NVRAM parameters...
[ 96.621192] qla2xxx 0000:05:08.1: Verifying loaded RISC code...
[ 96.867063] qla2xxx 0000:05:08.1: Allocated (64 KB) for EFT...
[ 96.867291] qla2xxx 0000:05:08.1: Allocated (1413 KB) for firmware dump...
[ 96.883079] scsi1 : qla2xxx
[ 97.050576] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
[ 97.079474] kjournald starting. Commit interval 5 seconds
[ 97.102710] EXT3 FS on md0, internal journal
[ 97.102892] EXT3-fs: mounted filesystem with ordered data mode.
[ 97.107581] NET: Registered protocol family 17
[ 97.886212] tg3: eth2: Link is up at 1000 Mbps, full duplex.
[ 97.886360] tg3: eth2: Flow control is on for TX and on for RX.
[ 98.391136] tg3: eth3: Link is up at 1000 Mbps, full duplex.
[ 98.391327] tg3: eth3: Flow control is off for TX and off for RX.
[ 101.882801] qla2xxx 0000:05:08.1:
[ 101.882802] QLogic Fibre Channel HBA Driver: 8.01.07-k7
[ 101.882803] QLogic HP AE369-60001 - QLA2340
[ 101.882805] ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:05:08.1 hdma+, host#=1, fw=4.00.27 [IP]
[ 110.025161] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 110.029332] NFSD: starting 90-second grace period
[ 119.024220] qla2xxx 0000:05:08.1: Cable is unplugged...
[ 161.442311] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11)
[ 161.442486] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010)
[ 161.442647] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010)
[ 161.442815] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146)
[ 168.405116] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11)
[ 168.405296] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010)
[ 168.405461] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010)
[ 168.405629] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146)
[ 171.037813] tg3: eth3: Link is up at 1000 Mbps, full duplex.
[ 171.037937] tg3: eth3: Flow control is off for TX and off for RX.
[ 379.644485] PM: Writing back config space on device 0000:03:06.1 at offset b (was 164814e4, writing d00e11)
[ 379.644660] PM: Writing back config space on device 0000:03:06.1 at offset 3 (was 804000, writing 804010)
[ 379.644822] PM: Writing back config space on device 0000:03:06.1 at offset 2 (was 2000000, writing 2000010)
[ 379.644990] PM: Writing back config space on device 0000:03:06.1 at offset 1 (was 2b00000, writing 2b00146)
[ 383.429271] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11)
[ 383.429450] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010)
[ 383.429614] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010)
[ 383.429778] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146)
[ 391.553182] PM: Writing back config space on device 0000:03:06.1 at offset b (was 164814e4, writing d00e11)
[ 391.553361] PM: Writing back config space on device 0000:03:06.1 at offset 3 (was 804000, writing 804010)
[ 391.553525] PM: Writing back config space on device 0000:03:06.1 at offset 2 (was 2000000, writing 2000010)
[ 391.553689] PM: Writing back config space on device 0000:03:06.1 at offset 1 (was 2b00000, writing 2b00146)
[ 394.188626] tg3: eth2: Link is up at 1000 Mbps, full duplex.
[ 394.188753] tg3: eth2: Flow control is on for TX and on for RX.
[ 409.079938] PM: Writing back config space on device 0000:03:06.0 at offset b (was 164814e4, writing d00e11)
[ 409.080115] PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 804000, writing 804010)
[ 409.080277] PM: Writing back config space on device 0000:03:06.0 at offset 2 (was 2000000, writing 2000010)
[ 409.080445] PM: Writing back config space on device 0000:03:06.0 at offset 1 (was 2b00000, writing 2b00146)
[ 411.713469] tg3: eth3: Link is up at 1000 Mbps, full duplex.
[ 411.713621] tg3: eth3: Flow control is off for TX and off for RX.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22-rc6
# Thu Jun 28 14:51:35 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="initramfs.txt"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
# CONFIG_MTRR is not set
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_BLINK is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET_MII is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
# CONFIG_DVB_CORE_ATTACH is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
#
# DVB-T (terrestrial) frontends
#
#
# DVB-C (cable) frontends
#
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
#
# Tuners/PLL support
#
#
# Miscellaneous devices
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--
The only person who always got his work done by Friday was Robinson Crusoe
Download attachment "signature.asc" of type "application/pgp-signature" (190 bytes)
Powered by blists - more mailing lists