| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200707031938.20956.bzolnier@gmail.com>
Date: Tue, 3 Jul 2007 19:38:20 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: Alan Cox <alan@...rguk.ukuu.org.uk>
Cc: akpm@...l.org, linux-kernel@...r.kernel.org,
linux-ide@...r.kernel.org, jeff@...zik.org
Subject: Re: [PATCH] pata_hpt3x3: Major reworking and testing
Hi,
On Tuesday 03 July 2007, Alan Cox wrote:
> The HPT343/345 (aka 363) is a bit of a warped device. For many setups you
> need to access the other registers via BAR4 offsets. PIO is now rock
If you happen to have HPT363 you may want to check how BIOS does the DMA
configuration. I wouldn't be surprised if it turns out that _both_ drivers
do it wrongly currently.
> solid, DMA isn't. Unfortunately the drivers/ide hpt34x driver is
> completely broken so doesn't help further debug.
Translation:
The new improved driver is not really better than the old one because
the old one is broken. :)
Old driver does identical configuration when it comes to PIO modes.
For DMA modes it seem to have bug in setting DMA transfer type bits but DMA
is _never_ enabled unless CONFIG_HPT34X_AUTODMA is set and this config option
is marked EXPERIMENTAL with the help entry stating that enabling DMA is a
dangerous thing to do.
Old driver is a source of PCI quirk which is now propagated to the new driver.
Thanks,
Bart
> Signed-off-by: Alan Cox <alan@...hat.com>
>
> diff -u --new-file --exclude-from /usr/src/exclude --recursive linux.vanilla-2.6.22-rc6-mm1/drivers/ata/pata_hpt3x3.c linux-2.6.22-rc6-mm1/drivers/ata/pata_hpt3x3.c
> --- linux.vanilla-2.6.22-rc6-mm1/drivers/ata/pata_hpt3x3.c 2007-07-02 20:50:11.000000000 +0100
> +++ linux-2.6.22-rc6-mm1/drivers/ata/pata_hpt3x3.c 2007-07-02 21:03:32.000000000 +0100
> @@ -23,7 +23,7 @@
> #include <linux/libata.h>
>
> #define DRV_NAME "pata_hpt3x3"
> -#define DRV_VERSION "0.4.3"
> +#define DRV_VERSION "0.5.3"
>
> /**
> * hpt3x3_set_piomode - PIO setup
> @@ -59,6 +59,9 @@
> *
> * Set up the channel for MWDMA or UDMA modes. Much the same as with
> * PIO, load the mode number and then set MWDMA or UDMA flag.
> + *
> + * 0x44 : bit 0-2 master mode, 3-5 slave mode, etc
> + * 0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc
> */
>
> static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
> @@ -76,14 +79,26 @@
> r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */
>
> if (adev->dma_mode >= XFER_UDMA_0)
> - r2 |= 0x01 << dn; /* Ultra mode */
> + r2 |= (0x10 << dn); /* Ultra mode */
> else
> - r2 |= 0x10 << dn; /* MWDMA */
> + r2 |= (0x01 << dn); /* MWDMA */
>
> pci_write_config_dword(pdev, 0x44, r1);
> pci_write_config_dword(pdev, 0x48, r2);
> }
>
> +/**
> + * hpt3x3_atapi_dma - ATAPI DMA check
> + * @qc: Queued command
> + *
> + * Just say no - we don't do ATAPI DMA
> + */
> +
> +static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
> +{
> + return 1;
> +}
> +
> static struct scsi_host_template hpt3x3_sht = {
> .module = THIS_MODULE,
> .name = DRV_NAME,
> @@ -105,7 +120,6 @@
> static struct ata_port_operations hpt3x3_port_ops = {
> .port_disable = ata_port_disable,
> .set_piomode = hpt3x3_set_piomode,
> - .set_dmamode = hpt3x3_set_dmamode,
> .mode_filter = ata_pci_default_filter,
>
> .tf_load = ata_tf_load,
> @@ -124,8 +138,9 @@
> .bmdma_start = ata_bmdma_start,
> .bmdma_stop = ata_bmdma_stop,
> .bmdma_status = ata_bmdma_status,
> + .check_atapi_dma= hpt3x3_atapi_dma,
>
> - .qc_prep = ata_qc_prep,
> + .qc_prep = ata_qc_prep,
> .qc_issue = ata_qc_issue_prot,
>
> .data_xfer = ata_data_xfer,
> @@ -158,32 +173,79 @@
> pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
> }
>
> -
> /**
> * hpt3x3_init_one - Initialise an HPT343/363
> - * @dev: PCI device
> + * @pdev: PCI device
> * @id: Entry in match table
> *
> - * Perform basic initialisation. The chip has a quirk that it won't
> - * function unless it is at XX00. The old ATA driver touched this up
> - * but we leave it for pci quirks to do properly.
> + * Perform basic initialisation. We set the device up so we access all
> + * ports via BAR4. This is neccessary to work around errata.
> */
>
> -static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
> +static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
> {
> + static int printed_version;
> static const struct ata_port_info info = {
> .sht = &hpt3x3_sht,
> .flags = ATA_FLAG_SLAVE_POSS,
> .pio_mask = 0x1f,
> +#if defined(CONFIG_PATA_HPT3X3_DMA)
> + /* Further debug needed */
> .mwdma_mask = 0x07,
> .udma_mask = 0x07,
> +#endif
> .port_ops = &hpt3x3_port_ops
> };
> + /* Register offsets of taskfiles in BAR4 area */
> + static const u8 offset_cmd[2] = { 0x20, 0x28 };
> + static const u8 offset_ctl[2] = { 0x36, 0x3E };
> const struct ata_port_info *ppi[] = { &info, NULL };
> -
> - hpt3x3_init_chipset(dev);
> - /* Now kick off ATA set up */
> - return ata_pci_init_one(dev, ppi);
> + struct ata_host *host;
> + int i, rc;
> + void __iomem *base;
> +
> + hpt3x3_init_chipset(pdev);
> +
> + if (!printed_version++)
> + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
> +
> + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
> + if (!host)
> + return -ENOMEM;
> + /* acquire resources and fill host */
> + rc = pcim_enable_device(pdev);
> + if (rc)
> + return rc;
> +
> + /* Everything is relative to BAR4 if we set up this way */
> + rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
> + if (rc == -EBUSY)
> + pcim_pin_device(pdev);
> + if (rc)
> + return rc;
> + host->iomap = pcim_iomap_table(pdev);
> + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
> + if (rc)
> + return rc;
> + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
> + if (rc)
> + return rc;
> +
> + base = host->iomap[4]; /* Bus mastering base */
> +
> + for (i = 0; i < host->n_ports; i++) {
> + struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
> +
> + ioaddr->cmd_addr = base + offset_cmd[i];
> + ioaddr->altstatus_addr =
> + ioaddr->ctl_addr = base + offset_ctl[i];
> + ioaddr->scr_addr = NULL;
> + ata_std_ports(ioaddr);
> + ioaddr->bmdma_addr = base + 8 * i;
> + }
> + pci_set_master(pdev);
> + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
> + &hpt3x3_sht);
> }
>
> #ifdef CONFIG_PM
> diff -u --new-file --exclude-from /usr/src/exclude --recursive linux.vanilla-2.6.22-rc6-mm1/drivers/ata/Kconfig linux-2.6.22-rc6-mm1/drivers/ata/Kconfig
> --- linux.vanilla-2.6.22-rc6-mm1/drivers/ata/Kconfig 2007-07-02 20:50:11.000000000 +0100
> +++ linux-2.6.22-rc6-mm1/drivers/ata/Kconfig 2007-07-02 21:02:10.000000000 +0100
> @@ -313,7 +313,7 @@
> If unsure, say N.
>
> config PATA_HPT3X3
> - tristate "HPT 343/363 PATA support (Experimental)"
> + tristate "HPT 343/363 PATA support"
> depends on PCI
> help
> This option enables support for the HPT 343/363
> @@ -321,6 +321,14 @@
>
> If unsure, say N.
>
> +config PATA_HPT3X3_DMA
> + bool "HPT 343/363 DMA support (Experimental)"
> + depends on PATA_HPT3X3
> + help
> + This option enables DMA support for the HPT343/363
> + controllers. Enable with care as there are still some
> + problems with DMA on this chipset.
> +
> config PATA_ISAPNP
> tristate "ISA Plug and Play PATA support (Experimental)"
> depends on EXPERIMENTAL && ISAPNP
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists