Linux version 2.6.20-2925.11.fc7xen (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon Jun 11 16:21:08 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize bail 0 copy_e820_map() start: 0000000000000000 size: 000000001d801000 end: 000000001d801000 type: 1 Xen: 0000000000000000 - 000000001d801000 (usable) 0MB HIGHMEM available. 472MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 120833) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 120833 Normal 120833 -> 120833 HighMem 120833 -> 120833 early_node_map[1] active PFN ranges 0: 0 -> 120833 On node 0 totalpages: 120833 DMA zone: 944 pages used for memmap DMA zone: 0 pages reserved DMA zone: 119889 pages, LIFO batch:31 Normal zone: 0 pages used for memmap HighMem zone: 0 pages used for memmap DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f6db0 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Built 1 zonelists. Total pages: 119889 Kernel command line: ro root=LABEL=/ rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c135c000 soft=c133c000 PID hash table entries: 2048 (order: 11, 8192 bytes) Xen reported: 1599.610 MHz processor. Console: colour VGA+ 80x50 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1064 kB per task-struct memory footprint: 1200 bytes Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: 0x00000000c015f000 - 0x00000000c035f000 Address size: 30 bits vmalloc area: de800000-f4ffe000, maxmem 2d7fe000 Memory: 453632k/483332k available (2022k kernel code, 21236k reserved, 1075k data, 180k init, 0k highmem) virtual kernel memory layout: fixmap : 0xf5315000 - 0xf57fe000 (5028 kB) pkmap : 0xf5000000 - 0xf5200000 (2048 kB) vmalloc : 0xde800000 - 0xf4ffe000 ( 359 MB) lowmem : 0xc0000000 - 0xdd801000 ( 472 MB) .init : 0xc130b000 - 0xc1338000 ( 180 kB) .data : 0xc11f9a5d - 0xc1306714 (1075 kB) .text : 0xc1000000 - 0xc11f9a5d (2022 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4010.94 BogoMIPS (lpj=8021890) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383d1f1 c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383d1f1 c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0800 (from 0e00) Brought up 1 CPUs sizeof(vma)=88 bytes sizeof(page)=32 bytes sizeof(inode)=564 bytes sizeof(dentry)=156 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=2656 bytes Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 Setting up standard PCI resources Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 6000-607f claimed by vt82c686 HW-mon PCI quirk: region 5000-500f claimed by vt82c686 SMB PCI: Firmware left 0000:00:14.0 e100 interrupts enabled, disabling Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices xen_mem: Initialising balloon driver. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: d8000000-d9ffffff PREFETCH window: d4000000-d7ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 7, 524288 bytes) TCP bind hash table entries: 8192 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7283k freed IA-32 Microcode Update Driver: v1.14-xen audit: initializing netlink socket (disabled) audit(1183441365.000:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: AGP aperture is 64M @ 0xd0000000 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Xen virtual console successfully installed as ttyS0 Event-channel device installed. usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 180k freed Write protecting the kernel read-only data: 759k 4gb seg fixup, process init (pid 1), cs:ip 73:00ef6b0d 4gb seg fixup, process init (pid 1), cs:ip 73:00883e67 4gb seg fixup, process init (pid 1), cs:ip 73:00eed710 4gb seg fixup, process init (pid 1), cs:ip 73:00f64659 4gb seg fixup, process init (pid 1), cs:ip 73:00ef0fdc 4gb seg fixup, process init (pid 1), cs:ip 73:00ef0fea 4gb seg fixup, process init (pid 1), cs:ip 73:00f47d82 4gb seg fixup, process init (pid 1), cs:ip 73:00ee9ff1 4gb seg fixup, process init (pid 1), cs:ip 73:00ef0fdc 4gb seg fixup, process init (pid 1), cs:ip 73:00ef0fea input: PS2++ Logitech Wheel Mouse as /class/input/input2 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: irq 10, io base 0x0000a800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver SCSI subsystem initialized libata version 2.00 loaded. pata_via 0000:00:07.1: version 0.2.1 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xA000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xA008 irq 15 scsi0 : pata_via usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice ata1.00: ATA-6, max UDMA/100, 39102336 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATAPI, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 scsi1 : pata_via ata2.00: ATAPI, max MWDMA2 ata2.01: ATA-7, max UDMA/133, 80293248 sectors: LBA ata2.01: ata2: dev 1 multi count 16 ata2.00: configured for MWDMA2 ata2.01: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST320410A 5.33 PQ: 0 ANSI: 5 SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: CD-ROM PIONEER DVD RW DVR-106D 1.05 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8400B 1.00 PQ: 0 ANSI: 5 scsi 1:0:1:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 SCSI device sdb: 80293248 512-byte hdwr sectors (41110 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 80293248 512-byte hdwr sectors (41110 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:1:0: Attached scsi disk sdb printk: 15605 messages suppressed. 4gb seg fixup, process init (pid 1), cs:ip 73:00ef0fdc ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 sym0: <810a> rev 0x12 at pci 0000:00:11.0 irq 11 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: SCSI BUS has been reset. scsi2 : sym-2.2.3 scsi: waiting for bus probes to complete ... printk: 297 messages suppressed. 4gb seg fixup, process nash-hotplug (pid 272), cs:ip 73:00ef0fdc kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1822 types, 79 bools, 1 sens, 1024 cats security: 60 classes, 68296 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1183441380.420:2): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Attached scsi generic sg1 type 5 scsi 1:0:0:0: Attached scsi generic sg2 type 5 sd 1:0:1:0: Attached scsi generic sg3 type 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray sr 1:0:0:0: Attached scsi CD-ROM sr1 Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 bttv0: Bt848 (rev 18) at 0000:00:12.0, irq: 10, latency: 32, mmio: 0xdb102000 bttv0: using: Zoltrix TV-Max [card=15,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=0 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found input: PC Speaker as /class/input/input3 tuner 0-0060: All bytes are equal. It is not a TEA5767 tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) tuner 0-0060: type set to 0 (Temic PAL (4002 FH5)) tuner 0-0060: type set to 0 (Temic PAL (4002 FH5)) tuner 0-0061: chip found @ 0xc2 (bt848 #0 [sw]) bttv0: registered device video0 bttv0: registered device vbi0 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 e100: eth0: e100_probe: addr 0xdb100000, irq 10, MAC addr 00:90:27:24:D0:34 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport_pc: VIA parallel port: io=0x378, irq=7 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:07.5 to 64 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver loop: loaded (max 8 devices) lp0: using parport0 (interrupt-driven). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] No dock devices found. ibm_acpi: ec object not found device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3776 buckets, 30208 max) Bridge firewalling registered ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready device eth0 entered promiscuous mode audit(1183441417.885:3): dev=eth0 prom=256 old_prom=0 auid=4294967295 br0: port 1(eth0) entering learning state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state audit(1183441423.153:4): audit_pid=1781 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts br0: no IPv6 routers present eth0: no IPv6 routers present Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts virbr0: no IPv6 routers present br0: port 1(eth0) entering disabled state pbr0: port 1(eth0) entering learning state pbr0: topology change detected, propagating pbr0: port 1(eth0) entering forwarding state [drm] Initialized drm 1.1.0 20060810 [drm] Initialized r128 2.5.0 20030725 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode pbr0: no IPv6 routers present ppdev: user-space parallel port driver ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev0: registered pardevice ppdev0: negotiated back to compatibility mode because user-space forgot ppdev0: unregistered pardevice ppdev0: registered pardevice ppdev0: unregistered pardevice