[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <4689F10B.8090606@gmail.com>
Date: Tue, 03 Jul 2007 15:47:39 +0900
From: Tejun Heo <htejun@...il.com>
To: Mikael Pettersson <mikpe@...uu.se>
CC: Jeff Garzik <jeff@...zik.org>, linux-ide@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2.6.22-rc5 2/2] sata_promise: SATA hotplug support
Mikael Pettersson wrote:
> This patch enables hotplugging of SATA devices in the
> sata_promise driver. It's been tested successfully on
> both first- and second-generation Promise SATA chips:
> SATA150 TX2plus, SATAII150 TX2plus, SATA300 TX2plus,
> and SATA300 TX4.
>
> The only quirk I've seen is that hotplugging (insertion)
> on the first-generation SATA150 TX2plus requires a lengthier
> EH sequence than on the second-generation chips.
> On the second-generation chips a simple soft reset seems
> to suffice, but on the first-generation chip there's a
> "port is slow to respond" after the initial soft reset,
> after which libata issues a hard reset, and then the
> device is recognised.
>
> The hotplug checks are high up in the interrupt handling
> path, not deep down in error_intr as in ahci/sata_sil24.
> That's because the chip doesn't signal hotplug status changes
> in the per-port status register: instead a global register
> contains hotplug control and status flags for all ports.
> I considered following the ahci/sata_sil24 structure, but
> that would have required non-trivial changes to the interrupt
> handling path, so I chose to keep the hotplug changes simple
> and unobtrusive.
>
> Signed-off-by: Mikael Pettersson <mikpe@...uu.se>
Some unlikely()'s might be helpful here and there but other than that.
Acked-by: Tejun Heo <htejun@...il.com>
--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists