lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20070710002807.e6f4bb19.akpm@linux-foundation.org>
Date:	Tue, 10 Jul 2007 00:28:07 -0700
From:	Andrew Morton <akpm@...ux-foundation.org>
To:	Graham Murray <gmurray@...wayone.co.uk>
Cc:	linux-kernel@...r.kernel.org, Jiri Slaby <jirislaby@...il.com>
Subject: Re: Specialix SX cards not detected in kernels >=2.6.20

On Mon, 09 Jul 2007 15:00:17 +0100 Graham Murray <gmurray@...wayone.co.uk> wrote:

> There were multiple changes to the char/sx.c driver in kernel 2.6.20.

Let's cc Jiri.

> In
> kernels 2.6.19 and earlier, the SX multiport serial card works OK, but
> in 2.6.20 and later the driver does not seemt to detect the presence of
> the card. 
> 
> I have enabled sx_debug=-1 and added some printk statements to try and
> detect why the card is not detected. These show that sx_init is entered
> and within that function the call to pci_register_driver returns 0. I do
> not see any other routines in the driver being entered either at startup
> (when the module is loaded, which indicates that the system recognises
> the PCI ID) or when running 'modprobe sx'. In particular, sx_pci_probe()
> is never entered.
> 
> lspci -vv for the card
> 
>  10:01.0 Communication controller: Specialix Research Ltd. PCI_9050
> 	Subsystem: Specialix Research Ltd. Unknown device 0300
> 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at df2ffc00 (32-bit, non-prefetchable) [size=128]
> 	Region 1: I/O ports at 9c80 [size=128]
> 	Region 2: Memory at df200000 (32-bit, non-prefetchable) [size=512K]
> 	Region 3: Memory at df280000 (32-bit, non-prefetchable) [size=256K]
> 
> I have enabled CONFIG_PCI_DEBUG and see the following:-
> 
> PCI: Probing PCI hardware (bus 00)
> ...
> PCI: Scanning bus 0000:10
> PCI: Found 0000:10:01.0 [11cb/2000] 000780 00
> PCI: Calling quirk c0362041 for 0000:10:01.0
> ...
> PCI: Calling quirk c027a199 for 0000:10:01.0
> PCI: Calling quirk c033cb9e for 0000:10:01.0
> 
> 
> Where should I look for and how should I obtain further debug to
> determine where the problem lies?
> 

A git-bisect should find this fairly quickly.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ