linux-kernel - e100 PCI bridge problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 13 Jul 2007 13:37:31 -0400
From:	William Montgomery <william@...nicus.com>
To:	linux-kernel@...r.kernel.org
Subject: e100 PCI bridge problem

In an earlier post to the list I described a hard lockup condition
that occurs on linux kernels 2.4.22, 2.6.13, and 2.6.17 when using
a 4 port 10/100 fast ethernet card.  The lockup is easily repeatable
and occurs on 2 out of 3 computers.

Further testing has revealed that the lockup can be prevented on all
computers by making sure the card is installed on the primary PCI bus.
If the card is installed in a slot on the secondary PCI bus (behind a
PCI to PCI bridge) the lockup occurs.

Are there any PCI tuning registers that I can tweak to get around
this problem?  Any changes I could make to the e100 driver to fix this?

Any help appreciated.

Regards,
Wm

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/