| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 13 Jul 2007 11:29:10 -0700
From: David Brownell <david-b@...bell.net>
To: Dmitry Torokhov <dtor@...l.ru>, dtor@...ightbb.com
Cc: Semih Hazar <semih.hazar@...efia.com>,
Imre Deak <imre.deak@...idboot.com>,
Linux Kernel list <linux-kernel@...r.kernel.org>
Subject: [RESEND patch 2.6.22-rc4 1/2] ads7846 sample settling
From: Semih Hazar <semih.hazar@...efia.com>
The ads7846 driver has support for filtering, but when the chip gets
deselected between samples this causes noise. This patch adds support
for an optional settling delay time, so that two consecutive samples
will be taken with the specified delay time apart. This ensures that
the chip won't be deselected, so the noise won't appear.
Filtering can still be done, but will have less work to do since each
time a new sample is taken the same delay applies.
Signed-off-by: Semih Hazar <semih.hazar@...efia.com>
Cc: Imre Deak <imre.deak@...idboot.com>
Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
---
Still applies fine against 2.6.22-git ... this should be in 2.6.23
drivers/input/touchscreen/ads7846.c | 65 +++++++++++++++++++++++++++++++++++-
include/linux/spi/ads7846.h | 8 ++++
2 files changed, 72 insertions(+), 1 deletion(-)
--- g26.orig/include/linux/spi/ads7846.h 2007-02-12 00:31:26.000000000 -0800
+++ g26/include/linux/spi/ads7846.h 2007-06-16 04:33:43.000000000 -0700
@@ -16,6 +16,14 @@ struct ads7846_platform_data {
u16 vref_delay_usecs; /* 0 for external vref; etc */
int keep_vref_on:1; /* set to keep vref on for differential
* measurements as well */
+
+ /* Settling time of the analog signals; a function of Vcc and the
+ * capacitance on the X/Y drivers. If set to non-zero, two samples
+ * are taken with settle_delay us apart, and the second one is used.
+ * ~150 uSec with 0.01uF caps.
+ */
+ u16 settle_delay_usecs;
+
u16 x_plate_ohms;
u16 y_plate_ohms;
--- g26.orig/drivers/input/touchscreen/ads7846.c 2007-05-24 12:04:45.000000000 -0700
+++ g26/drivers/input/touchscreen/ads7846.c 2007-06-16 09:46:22.000000000 -0700
@@ -95,7 +95,7 @@ struct ads7846 {
u16 dummy; /* for the pwrdown read */
struct ts_event tc;
- struct spi_transfer xfer[10];
+ struct spi_transfer xfer[18];
struct spi_message msg[5];
struct spi_message *last_msg;
int msg_idx;
@@ -936,6 +936,24 @@ static int __devinit ads7846_probe(struc
x->len = 2;
spi_message_add_tail(x, m);
+ /* the first sample after switching drivers can be low quality;
+ * optionally discard it, using a second one after the signals
+ * have had enough time to stabilize.
+ */
+ if (pdata->settle_delay_usecs) {
+ x->delay_usecs = pdata->settle_delay_usecs;
+
+ x++;
+ x->tx_buf = &ts->read_y;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+ x->rx_buf = &ts->tc.y;
+ x->len = 2;
+ spi_message_add_tail(x, m);
+ }
+
m->complete = ads7846_rx_val;
m->context = ts;
@@ -954,6 +972,21 @@ static int __devinit ads7846_probe(struc
x->len = 2;
spi_message_add_tail(x, m);
+ /* ... maybe discard first sample ... */
+ if (pdata->settle_delay_usecs) {
+ x->delay_usecs = pdata->settle_delay_usecs;
+
+ x++;
+ x->tx_buf = &ts->read_x;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+ x->rx_buf = &ts->tc.x;
+ x->len = 2;
+ spi_message_add_tail(x, m);
+ }
+
m->complete = ads7846_rx_val;
m->context = ts;
@@ -973,6 +1006,21 @@ static int __devinit ads7846_probe(struc
x->len = 2;
spi_message_add_tail(x, m);
+ /* ... maybe discard first sample ... */
+ if (pdata->settle_delay_usecs) {
+ x->delay_usecs = pdata->settle_delay_usecs;
+
+ x++;
+ x->tx_buf = &ts->read_z1;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+ x->rx_buf = &ts->tc.z1;
+ x->len = 2;
+ spi_message_add_tail(x, m);
+ }
+
m->complete = ads7846_rx_val;
m->context = ts;
@@ -990,6 +1038,21 @@ static int __devinit ads7846_probe(struc
x->len = 2;
spi_message_add_tail(x, m);
+ /* ... maybe discard first sample ... */
+ if (pdata->settle_delay_usecs) {
+ x->delay_usecs = pdata->settle_delay_usecs;
+
+ x++;
+ x->tx_buf = &ts->read_z2;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+ x->rx_buf = &ts->tc.z2;
+ x->len = 2;
+ spi_message_add_tail(x, m);
+ }
+
m->complete = ads7846_rx_val;
m->context = ts;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists