[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <469864DC.7040305@gmail.com>
Date: Sat, 14 Jul 2007 07:53:32 +0200
From: Jiri Slaby <jirislaby@...il.com>
To: caglar@...dus.org.tr
CC: LKML <linux-kernel@...r.kernel.org>, kkeil@...e.de,
kai.germaschewski@....de, isdn4linux@...tserv.isdn4linux.de
Subject: Re: [PATCH 12/12] drivers/isdn/hisax/w6692.c: replace pci_find_device
with pci_get_device
S.Çağlar Onur napsal(a):
> Following patch replaces pci_find_device with pci_get_device to avoid
> following compiliation warning;
>
> drivers/isdn/hisax/w6692.c: In function `setup_w6692':
> drivers/isdn/hisax/w6692.c:1014: warning: `pci_find_device' is deprecated
> (declared at include/linux/pci.h:478)
>
> and also removes trailing whitespaces at the ends of lines and converts
> smarttabs/whitespaces into real tabs
>
> Signed-off-by: S.Çağlar Onur <caglar@...dus.org.tr>
>
> ---
> drivers/isdn/hisax/w6692.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> Index: linux-2.6/drivers/isdn/hisax/w6692.c
> ===================================================================
> --- linux-2.6.orig/drivers/isdn/hisax/w6692.c
> +++ linux-2.6/drivers/isdn/hisax/w6692.c
> @@ -1011,7 +1011,7 @@ setup_w6692(struct IsdnCard *card)
> return (0);
> #ifdef CONFIG_PCI
> while (id_list[id_idx].vendor_id) {
> - dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
> + dev_w6692 = pci_get_device(id_list[id_idx].vendor_id,
> id_list[id_idx].device_id,
> dev_w6692);
> if (dev_w6692) {
> @@ -1031,7 +1031,7 @@ setup_w6692(struct IsdnCard *card)
> /* USR ISDN PCI card TA need some special handling */
> if (cs->subtyp == W6692_WINBOND) {
> if ((W6692_SV_USR == dev_w6692->subsystem_vendor) &&
> - (W6692_SD_USR == dev_w6692->subsystem_device)) {
> + (W6692_SD_USR == dev_w6692->subsystem_device)) {
> cs->subtyp = W6692_USR;
> }
> }
> @@ -1043,11 +1043,11 @@ setup_w6692(struct IsdnCard *card)
> cs->irq = pci_irq;
> if (!cs->irq) {
> printk(KERN_WARNING "W6692: No IRQ for PCI card found\n");
> - return (0);
> + goto dev_w6692_cleanup;
> }
> if (!pci_ioaddr) {
> printk(KERN_WARNING "W6692: NO I/O Base Address found\n");
> - return (0);
> + goto dev_w6692_cleanup;
> }
> cs->hw.w6692.iobase = pci_ioaddr;
> printk(KERN_INFO "Found: %s %s, I/O base: 0x%x, irq: %d\n",
> @@ -1059,7 +1059,7 @@ setup_w6692(struct IsdnCard *card)
> id_list[cs->subtyp].card_name,
> cs->hw.w6692.iobase,
> cs->hw.w6692.iobase + 255);
> - return (0);
> + goto dev_w6692_cleanup;
> }
> #else
> printk(KERN_WARNING "HiSax: W6692 and NO_PCI_BIOS\n");
> @@ -1089,5 +1089,10 @@ setup_w6692(struct IsdnCard *card)
> printk(KERN_INFO "W6692 D_EXIR=0x%X\n", ReadW6692(cs, W_D_EXIR));
> printk(KERN_INFO "W6692 D_EXIM=0x%X\n", ReadW6692(cs, W_D_EXIM));
> printk(KERN_INFO "W6692 D_RSTA=0x%X\n", ReadW6692(cs, W_D_RSTA));
> + pci_dev_put(dev_w6692);
Why do you release a reference here when you use the card all the time module is
loaded?
--
Jiri Slaby (jirislaby@...il.com)
Faculty of Informatics, Masaryk University
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists