[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1184888714353-git-send-email-jacliburn@bellsouth.net>
Date: Thu, 19 Jul 2007 18:45:14 -0500
From: Jay Cliburn <jacliburn@...lsouth.net>
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
atl1-devel@...ts.sourceforge.net, csnook@...hat.com,
Jay Cliburn <jacliburn@...lsouth.net>
Subject: [PATCH 5/5] atl1: use kernel provided ethernet length constants
Use constants already provided by the kernel for ethernet related lengths.
Signed-off-by: Jay Cliburn <jacliburn@...lsouth.net>
---
drivers/net/atl1/atl1_hw.h | 5 -----
drivers/net/atl1/atl1_main.c | 13 +++++++------
2 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h
index f0d7e82..939aa0f 100644
--- a/drivers/net/atl1/atl1_hw.h
+++ b/drivers/net/atl1/atl1_hw.h
@@ -680,11 +680,6 @@ void atl1_check_options(struct atl1_adapter *adapter);
#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
-/* The size (in bytes) of a ethernet packet */
-#define ENET_HEADER_SIZE 14
-#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */
-#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */
-#define ETHERNET_FCS_SIZE 4
#define MAX_JUMBO_FRAME_SIZE 0x2800
#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 6aa2dc3..993ed2a 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -59,6 +59,7 @@
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
+#include <linux/if_ether.h>
#include <linux/irqreturn.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
@@ -120,8 +121,8 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+ hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->wol = 0;
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
@@ -688,9 +689,9 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
int old_mtu = netdev->mtu;
- int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
- if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
return -EINVAL;
@@ -1337,7 +1338,7 @@ rrd_ok:
skb = buffer_info->skb;
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
- skb_put(skb, length - ETHERNET_FCS_SIZE);
+ skb_put(skb, length - ETH_FCS_LEN);
/* Receive Checksum Offload */
atl1_rx_checksum(adapter, rrd, skb);
@@ -1456,7 +1457,7 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
iph->daddr, 0, IPPROTO_TCP, 0);
ipofst = skb_network_offset(skb);
- if (ipofst != ENET_HEADER_SIZE) /* 802.3 frame */
+ if (ipofst != ETH_HLEN) /* 802.3 frame */
tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT;
tso->tsopl |= (iph->ihl &
--
1.5.2.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists