Linux version 2.6.21-2-686 (Debian 2.6.21-6) (waldi@debian.org) (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP Wed Jul 11 03:53:02 UTC 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001fe30000 end: 000000001ff30000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001ff30000 size: 0000000000010000 end: 000000001ff40000 type: 3 copy_e820_map() start: 000000001ff40000 size: 00000000000b0000 end: 000000001fff0000 type: 4 copy_e820_map() start: 000000001fff0000 size: 0000000000010000 end: 0000000020000000 type: 2 copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 130864) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 130864 HighMem 130864 -> 130864 early_node_map[1] active PFN ranges 0: 0 -> 130864 On node 0 totalpages: 130864 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 990 pages used for memmap Normal zone: 125778 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F9E30, 0014 (r0 ACPIAM) ACPI: RSDT 1FF30000, 0030 (r1 A M I OEMRSDT 11000306 MSFT 97) ACPI: FACP 1FF30200, 0081 (r2 A M I OEMFACP 11000306 MSFT 97) ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126] ACPI: DSDT 1FF303F0, 382D (r1 P4P81 P4P81088 88 INTL 2002026) ACPI: FACS 1FF40000, 0040 ACPI: APIC 1FF30390, 005C (r1 A M I OEMAPIC 11000306 MSFT 97) ACPI: OEMB 1FF40040, 003F (r1 A M I OEMBIOS 11000306 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) Built 1 zonelists. Total pages: 129842 Kernel command line: root=/dev/hda8 vga=795 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 2806.561 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514116k/523456k available (1661k kernel code, 8752k reserved, 636k data, 212k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdff30000 ( 511 MB) .init : 0xc0345000 - 0xc037a000 ( 212 kB) .data : 0xc029f5e5 - 0xc033e834 ( 636 kB) .text : 0xc0100000 - 0xc029f5e5 (1661 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5617.26 BogoMIPS (lpj=11234535) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5613.17 BogoMIPS (lpj=11226355) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Total of 2 processors activated (11230.44 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=67 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices ASUS P4P800 detected. Disabling PnPBIOS PnPBIOS: Disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: 00:0a: ioport range 0x680-0x6ff has been reserved pnp: 00:0a: ioport range 0x290-0x297 has been reserved pnp: 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved pnp: 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0d: iomem range 0x100000-0x1ffeffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fc900000-fe9fffff PREFETCH window: e7f00000-f7efffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1305k freed audit: initializing netlink socket (disabled) audit(1185398280.336:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 10240k, total 131072k vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: protected mode interface info at c000:ef40 vesafb: pmi: set display start = c00cef76, set palette = c00cefe0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 212k freed input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: SAMSUNG SP1614N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON DVDRW SHW-1635S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 SCSI subsystem initialized libata version 2.20 loaded. hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub input: PC Speaker as /class/input/input1 usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ef00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected intel_rng: FWH not detected parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Real Time Clock Driver v1.12ac ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Intel 810 + AC97 Audio, version 1.01, 03:46:36 Jul 11 2007 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ef40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000ef80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usb 2-2: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH5 found at IO 0xee80 and 0xe800, MEM 0xfebff800 and 0xfebff400, IRQ 17 i810: Intel ICH5 mmio at 0xe0838800 and 0xe1402400 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Trackball as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS117 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 6 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-2: USB disconnect, address 2 ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 21 ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ieee1394: Initialized config rom entry `ip1394' Linux video capture interface: v2.00 saa7146: register extension 'dvb'. usb 2-2: new low speed USB device using uhci_hcd and address 3 wlan: 0.8.4.2 (0.9.3) ath_pci: 0.9.4.5 (0.9.3) usb 2-2: configuration #1 chosen from 1 choice input: Logitech USB Trackball as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.1-2 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22 skge 1.10 addr 0xfeafc000 irq 22 chip Yukon rev 1 skge eth0: addr 00:0e:a6:5a:62:a3 ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23] MMIO=[feafb000-feafb7ff] Max Packet=[2048] IR/IT contexts=[8/8] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 saa7146: found saa7146 @ mem e1466c00 (revision 1, irq 22) (0x13c2,0x000e). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3). adapter has MAC addr = 00:d0:5c:24:b9:5d dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input4 dvb-ttpci: found av7110-0. ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 23 ath_rate_sample: 1.2 (0.9.3) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 7.9 phy 4.5 radio 5.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xfeae0000, irq=23 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000007241] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1 across:1020088k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4089 buckets, 32712 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky tun0: Disabled Privacy Extensions input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input6 ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver ath0: no IPv6 routers present usb 5-1: new high speed USB device using ehci_hcd and address 3 usb 5-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 0:0:0:0: Direct-Access TOSHIBA MK6021GAS 0811 PQ: 0 ANSI: 0 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: test WP failed, assume Write Enabled sda: assuming drive cache: write through SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: test WP failed, assume Write Enabled sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi disk sda cdrom: This disc doesn't have any tracks I recognize! hdc: DMA timeout retry hdc: timeout waiting for DMA hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command Clocksource tsc unstable (delta = 60929737808 ns) Time: acpi_pm clocksource has been installed. BUG: soft lockup detected on CPU#0! [] softlockup_tick+0xa6/0xb5 [] update_process_times+0x3b/0x5e [] tick_sched_timer+0x78/0xbb [] hrtimer_interrupt+0x131/0x1bd [] tick_sched_timer+0x0/0xbb [] smp_apic_timer_interrupt+0x6c/0x7d [] apic_timer_interrupt+0x28/0x30 =======================