| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200707291438.06849.rjw@sisk.pl>
Date: Sun, 29 Jul 2007 14:38:05 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Len Brown <lenb@...nel.org>, david@...g.hm,
Andrew Morton <akpm@...ux-foundation.org>,
linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org,
Pavel Machek <pavel@....cz>, Adrian Bunk <bunk@...sta.de>,
Stefan Richter <stefanr@...6.in-berlin.de>,
Nigel Cunningham <nigel@...el.suspend2.net>,
pm list <linux-pm@...ts.linux-foundation.org>
Subject: [PATCH 2/2] Introduce CONFIG_SUSPEND
From: Rafael J. Wysocki <rjw@...k.pl>
Introduce CONFIG_SUSPEND representing the ability to enter system sleep states,
such as the ACPI S3 state, and allow the user to choose SUSPEND and HIBERNATION
independently of each other.
Make HOTPLUG_CPU be selected automatically if SUSPEND or HIBERNATION has been
chosen and the kernel is intended for SMP systems.
Also, introduce CONFIG_PM_SLEEP which is automatically selected if
CONFIG_SUSPEND or CONFIG_HIBERNATION is set and make CONFIG_ACPI_SLEEP depend
on it.
The top-level power management headers are modified to use the new definitions.
Still, there are many other files in which CONFIG_PM can be replaced with
CONFIG_PM_SLEEP or even with CONFIG_SUSPEND, but they can be updated in the
future.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
---
drivers/acpi/Kconfig | 2 +-
drivers/base/power/Makefile | 6 +++---
drivers/base/power/power.h | 4 ++--
include/acpi/acpi_bus.h | 7 +++++++
include/linux/freezer.h | 6 +++---
include/linux/pm.h | 8 ++++----
include/linux/suspend.h | 16 ++++++++--------
kernel/power/Kconfig | 39 +++++++++++++++++++++++++++++++--------
kernel/power/Makefile | 3 ++-
kernel/power/main.c | 26 ++++++++++++++++++--------
kernel/power/power.h | 10 +++++++++-
mm/page_alloc.c | 4 ++--
12 files changed, 90 insertions(+), 41 deletions(-)
Index: linux-2.6.23-rc1/kernel/power/Kconfig
===================================================================
--- linux-2.6.23-rc1.orig/kernel/power/Kconfig 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/kernel/power/Kconfig 2007-07-29 11:18:49.000000000 +0200
@@ -46,7 +46,7 @@ config PM_VERBOSE
config DISABLE_CONSOLE_SUSPEND
bool "Keep console(s) enabled during suspend/resume (DANGEROUS)"
- depends on PM_DEBUG
+ depends on PM_DEBUG && PM_SLEEP
default n
---help---
This option turns off the console suspend mechanism that prevents
@@ -57,7 +57,7 @@ config DISABLE_CONSOLE_SUSPEND
config PM_TRACE
bool "Suspend/resume event tracing"
- depends on PM_DEBUG && X86 && EXPERIMENTAL
+ depends on PM_DEBUG && X86 && PM_SLEEP && EXPERIMENTAL
default n
---help---
This enables some cheesy code to save the last PM event point in the
@@ -72,9 +72,37 @@ config PM_TRACE
CAUTION: this option will cause your machine's real-time clock to be
set to an invalid time after a resume.
+config SUSPEND_SMP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) || (PPC64 && (PPC_PSERIES || PPC_PMAC))
+ depends on SMP
+ default y
+
+config SUSPEND_SMP
+ bool
+ depends on SUSPEND_SMP_POSSIBLE && PM_SLEEP
+ select HOTPLUG_CPU
+ default y
+
+config PM_SLEEP
+ bool
+ depends on SUSPEND || HIBERNATION
+ default y
+
+config SUSPEND
+ bool "Suspend"
+ depends on PM
+ depends on !SMP || SUSPEND_SMP_POSSIBLE
+ default y
+ ---help---
+ Allow the system to enter sleep states in which main memory is
+ powered and thus its contents are preserved, such as the
+ suspend-to-RAM state (i.e. the ACPI S3 state).
+
config HIBERNATION
bool "Hibernation"
- depends on PM && SWAP && (((X86 || PPC64_SWSUSP) && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP))
+ depends on PM && SWAP
+ depends on ((X86 || PPC64_SWSUSP || FRV || PPC32) && !SMP) || SUSPEND_SMP_POSSIBLE
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
@@ -132,11 +160,6 @@ config PM_STD_PARTITION
suspended image to. It will simply pick the first available swap
device.
-config SUSPEND_SMP
- bool
- depends on HOTPLUG_CPU && (X86 || PPC64) && PM
- default y
-
config APM_EMULATION
tristate "Advanced Power Management Emulation"
depends on PM && SYS_SUPPORTS_APM_EMULATION
Index: linux-2.6.23-rc1/kernel/power/Makefile
===================================================================
--- linux-2.6.23-rc1.orig/kernel/power/Makefile 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/kernel/power/Makefile 2007-07-29 12:53:13.000000000 +0200
@@ -3,8 +3,9 @@ ifeq ($(CONFIG_PM_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
-obj-y := main.o process.o console.o
+obj-y := main.o
obj-$(CONFIG_PM_LEGACY) += pm.o
+obj-$(CONFIG_PM_SLEEP) += process.o console.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
Index: linux-2.6.23-rc1/drivers/base/power/Makefile
===================================================================
--- linux-2.6.23-rc1.orig/drivers/base/power/Makefile 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/drivers/base/power/Makefile 2007-07-29 11:06:27.000000000 +0200
@@ -1,6 +1,6 @@
-obj-y := shutdown.o
-obj-$(CONFIG_PM) += main.o suspend.o resume.o sysfs.o
-obj-$(CONFIG_PM_TRACE) += trace.o
+obj-y := shutdown.o
+obj-$(CONFIG_PM_SLEEP) += main.o suspend.o resume.o sysfs.o
+obj-$(CONFIG_PM_TRACE) += trace.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
Index: linux-2.6.23-rc1/include/linux/suspend.h
===================================================================
--- linux-2.6.23-rc1.orig/include/linux/suspend.h 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/include/linux/suspend.h 2007-07-29 12:46:45.000000000 +0200
@@ -10,7 +10,7 @@
#include <linux/pm.h>
#include <linux/mm.h>
-#if defined(CONFIG_PM) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
+#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
extern int pm_prepare_console(void);
extern void pm_restore_console(void);
#else
@@ -77,7 +77,7 @@ struct platform_suspend_ops {
void (*finish)(void);
};
-#ifdef CONFIG_PM
+#ifdef CONFIG_SUSPEND
/**
* suspend_set_ops - set platform dependent suspend operations
* @ops: The new suspend operations to set.
@@ -104,12 +104,12 @@ extern void arch_suspend_disable_irqs(vo
extern void arch_suspend_enable_irqs(void);
extern int pm_suspend(suspend_state_t state);
-#else /* CONFIG_PM */
+#else /* !CONFIG_SUSPEND */
#define suspend_valid_only_mem NULL
static inline void suspend_set_ops(struct platform_suspend_ops *ops) {}
static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
-#endif /* CONFIG_PM */
+#endif /* !CONFIG_SUSPEND */
/* struct pbe is used for creating lists of pages that should be restored
* atomically during the resume from disk, because the page frames they have
@@ -173,7 +173,6 @@ struct platform_hibernation_ops {
void (*restore_cleanup)(void);
};
-#ifdef CONFIG_PM
#ifdef CONFIG_HIBERNATION
/* kernel/power/snapshot.c */
extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
@@ -201,6 +200,7 @@ static inline void hibernation_set_ops(s
static inline int hibernate(void) { return -ENOSYS; }
#endif /* CONFIG_HIBERNATION */
+#ifdef CONFIG_PM_SLEEP
void save_processor_state(void);
void restore_processor_state(void);
struct saved_context;
@@ -225,7 +225,7 @@ static inline int unregister_pm_notifier
{ .notifier_call = fn, .priority = pri }; \
register_pm_notifier(&fn##_nb); \
}
-#else /* CONFIG_PM */
+#else /* !CONFIG_PM_SLEEP */
static inline int register_pm_notifier(struct notifier_block *nb)
{
@@ -238,9 +238,9 @@ static inline int unregister_pm_notifier
}
#define pm_notifier(fn, pri) do { (void)(fn); } while (0)
-#endif /* CONFIG_PM */
+#endif /* !CONFIG_PM_SLEEP */
-#if !defined CONFIG_HIBERNATION || !defined(CONFIG_PM)
+#ifndef CONFIG_HIBERNATION
static inline void register_nosave_region(unsigned long b, unsigned long e)
{
}
Index: linux-2.6.23-rc1/include/linux/pm.h
===================================================================
--- linux-2.6.23-rc1.orig/include/linux/pm.h 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/include/linux/pm.h 2007-07-29 11:06:27.000000000 +0200
@@ -175,7 +175,7 @@ typedef struct pm_message {
struct dev_pm_info {
pm_message_t power_state;
unsigned can_wakeup:1;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
unsigned should_wakeup:1;
struct list_head entry;
#endif
@@ -185,7 +185,7 @@ extern int device_power_down(pm_message_
extern void device_power_up(void);
extern void device_resume(void);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);
@@ -215,7 +215,7 @@ static inline int call_platform_enable_w
return 0;
}
-#else /* !CONFIG_PM */
+#else /* !CONFIG_PM_SLEEP */
static inline int device_suspend(pm_message_t state)
{
@@ -232,7 +232,7 @@ static inline int call_platform_enable_w
return 0;
}
-#endif
+#endif /* !CONFIG_PM_SLEEP */
/* changes to device_may_wakeup take effect on the next pm state change.
* by default, devices should wakeup if they can.
Index: linux-2.6.23-rc1/kernel/power/power.h
===================================================================
--- linux-2.6.23-rc1.orig/kernel/power/power.h 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/kernel/power/power.h 2007-07-29 11:06:27.000000000 +0200
@@ -176,9 +176,17 @@ struct timeval;
extern void swsusp_show_speed(struct timeval *, struct timeval *,
unsigned int, char *);
+#ifdef CONFIG_SUSPEND
/* kernel/power/main.c */
-extern int suspend_enter(suspend_state_t state);
extern int suspend_devices_and_enter(suspend_state_t state);
+#else /* !CONFIG_SUSPEND */
+static inline int suspend_devices_and_enter(suspend_state_t state)
+{
+ return -ENOSYS;
+}
+#endif /* !CONFIG_SUSPEND */
+
+/* kernel/power/common.c */
extern struct blocking_notifier_head pm_chain_head;
static inline int pm_notifier_call_chain(unsigned long val)
Index: linux-2.6.23-rc1/kernel/power/main.c
===================================================================
--- linux-2.6.23-rc1.orig/kernel/power/main.c 2007-07-29 11:05:14.000000000 +0200
+++ linux-2.6.23-rc1/kernel/power/main.c 2007-07-29 11:11:42.000000000 +0200
@@ -26,14 +26,16 @@
BLOCKING_NOTIFIER_HEAD(pm_chain_head);
-/*This is just an arbitrary number */
-#define FREE_PAGE_NUMBER (100)
-
DEFINE_MUTEX(pm_mutex);
unsigned int pm_flags;
EXPORT_SYMBOL(pm_flags);
+#ifdef CONFIG_SUSPEND
+
+/* This is just an arbitrary number */
+#define FREE_PAGE_NUMBER (100)
+
static struct platform_suspend_ops *suspend_ops;
/**
@@ -272,6 +274,8 @@ int pm_suspend(suspend_state_t state)
EXPORT_SYMBOL(pm_suspend);
+#endif /* CONFIG_SUSPEND */
+
decl_subsys(power,NULL,NULL);
@@ -288,13 +292,15 @@ decl_subsys(power,NULL,NULL);
static ssize_t state_show(struct kset *kset, char *buf)
{
+ char *s = buf;
+#ifdef CONFIG_SUSPEND
int i;
- char * s = buf;
for (i = 0; i < PM_SUSPEND_MAX; i++) {
if (pm_states[i] && valid_state(i))
s += sprintf(s,"%s ", pm_states[i]);
}
+#endif
#ifdef CONFIG_HIBERNATION
s += sprintf(s, "%s\n", "disk");
#else
@@ -307,11 +313,13 @@ static ssize_t state_show(struct kset *k
static ssize_t state_store(struct kset *kset, const char *buf, size_t n)
{
+#ifdef CONFIG_SUSPEND
suspend_state_t state = PM_SUSPEND_STANDBY;
const char * const *s;
+#endif
char *p;
- int error;
int len;
+ int error = -EINVAL;
p = memchr(buf, '\n', n);
len = p ? p - buf : n;
@@ -319,17 +327,19 @@ static ssize_t state_store(struct kset *
/* First, check if we are requested to hibernate */
if (len == 4 && !strncmp(buf, "disk", len)) {
error = hibernate();
- return error ? error : n;
+ goto Exit;
}
+#ifdef CONFIG_SUSPEND
for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++) {
if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
break;
}
if (state < PM_SUSPEND_MAX && *s)
error = enter_state(state);
- else
- error = -EINVAL;
+#endif
+
+ Exit:
return error ? error : n;
}
Index: linux-2.6.23-rc1/drivers/acpi/Kconfig
===================================================================
--- linux-2.6.23-rc1.orig/drivers/acpi/Kconfig 2007-07-28 22:42:57.000000000 +0200
+++ linux-2.6.23-rc1/drivers/acpi/Kconfig 2007-07-29 12:48:49.000000000 +0200
@@ -44,7 +44,7 @@ if ACPI
config ACPI_SLEEP
bool "Sleep States"
- depends on X86 && (!SMP || SUSPEND_SMP)
+ depends on X86 && PM_SLEEP
default y
---help---
This option adds support for ACPI suspend states.
Index: linux-2.6.23-rc1/mm/page_alloc.c
===================================================================
--- linux-2.6.23-rc1.orig/mm/page_alloc.c 2007-07-23 22:07:02.000000000 +0200
+++ linux-2.6.23-rc1/mm/page_alloc.c 2007-07-29 12:23:44.000000000 +0200
@@ -726,7 +726,7 @@ static void __drain_pages(unsigned int c
}
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_HIBERNATION
void mark_free_pages(struct zone *zone)
{
@@ -772,7 +772,7 @@ void drain_local_pages(void)
__drain_pages(smp_processor_id());
local_irq_restore(flags);
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_HIBERNATION */
/*
* Free a 0-order page
Index: linux-2.6.23-rc1/drivers/base/power/power.h
===================================================================
--- linux-2.6.23-rc1.orig/drivers/base/power/power.h 2007-07-26 13:00:38.000000000 +0200
+++ linux-2.6.23-rc1/drivers/base/power/power.h 2007-07-29 12:26:23.000000000 +0200
@@ -5,7 +5,7 @@
extern void device_shutdown(void);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
/*
* main.c
@@ -62,7 +62,7 @@ extern int resume_device(struct device *
*/
extern int suspend_device(struct device *, pm_message_t);
-#else /* CONFIG_PM */
+#else /* CONFIG_PM_SLEEP */
static inline int device_pm_add(struct device * dev)
Index: linux-2.6.23-rc1/include/linux/freezer.h
===================================================================
--- linux-2.6.23-rc1.orig/include/linux/freezer.h 2007-07-26 20:51:27.000000000 +0200
+++ linux-2.6.23-rc1/include/linux/freezer.h 2007-07-29 12:38:57.000000000 +0200
@@ -6,7 +6,7 @@
#include <linux/sched.h>
#include <linux/wait.h>
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
/*
* Check if a process has been frozen
*/
@@ -157,7 +157,7 @@ static inline void set_freezable(void)
} while (try_to_freeze()); \
__ret; \
})
-#else /* CONFIG_PM */
+#else /* !CONFIG_PM_SLEEP */
static inline int frozen(struct task_struct *p) { return 0; }
static inline int freezing(struct task_struct *p) { return 0; }
static inline void set_freeze_flag(struct task_struct *p) {}
@@ -181,6 +181,6 @@ static inline void set_freezable(void) {
#define wait_event_freezable_timeout(wq, condition, timeout) \
wait_event_interruptible_timeout(wq, condition, timeout)
-#endif /* CONFIG_PM */
+#endif /* !CONFIG_PM_SLEEP */
#endif /* FREEZER_H_INCLUDED */
Index: linux-2.6.23-rc1/include/acpi/acpi_bus.h
===================================================================
--- linux-2.6.23-rc1.orig/include/acpi/acpi_bus.h 2007-07-26 20:51:27.000000000 +0200
+++ linux-2.6.23-rc1/include/acpi/acpi_bus.h 2007-07-29 13:21:09.000000000 +0200
@@ -365,7 +365,14 @@ acpi_handle acpi_get_child(acpi_handle,
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+#ifdef CONFIG_ACPI_SLEEP
int acpi_pm_device_sleep_state(struct device *, int, int *);
+#else /* !CONFIG_ACPI_SLEEP */
+static inline int acpi_pm_device_sleep_state(struct device *d, int w, int *p)
+{
+ return ACPI_STATE_D3;
+}
+#endif /* !CONFIG_ACPI_SLEEP */
#endif /* CONFIG_ACPI */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists