| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200707301209.33961.bjorn.helgaas@hp.com>
Date: Mon, 30 Jul 2007 12:09:33 -0600
From: Bjorn Helgaas <bjorn.helgaas@...com>
To: Valdis.Kletnieks@...edu
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Kylene Hall <kjhall@...ibm.com>, tpm@...horst.net,
linux-kernel@...r.kernel.org
Subject: Re: 2.6.23-rc1-mm1 - seems OK on Dell Latitude D820, except for tpm_tis
On Friday 27 July 2007 04:43:13 pm Bjorn Helgaas wrote:
> On Friday 27 July 2007 07:28:09 am Valdis.Kletnieks@...edu wrote:
> > Looks like the problematic code is in tpm_tis.c tpm_tis_init() near here:
> >
> > for (i = 3; i < 16 && chip->vendor.irq == 0; i++) {
> > iowrite8(i, chip->vendor.iobase +
> > TPM_INT_VECTOR(chip->vendor.locality));
> > if (request_irq
> > (i, tis_int_probe, IRQF_SHARED,
> > chip->vendor.miscdev.name, chip) != 0) {
> > dev_info(chip->dev,
> > "Unable to request irq: %d for probe\n"
> > ,
> > i);
> > continue;
> > }
> >
> > This seems to be misbehaving differently for the two different DEBUG_SHIRQ
> > cases.
> >
> > With DEBUG_SHIRQ=n, it starts at IRQ3, gets to at least 8 (where it complains
> > it can't request it for probing), and possibly all the way to 15, without ever
> > actually selecting and assigning an IRQ (to refresh memories, in that range
> > /proc/interrupts only lists:
> >
> > 8: 0 0 IO-APIC-edge rtc
> > 9: 3 0 IO-APIC-fasteoi acpi
> > 12: 94 0 IO-APIC-edge i8042
> > 14: 148166 0 IO-APIC-edge libata
> > 15: 94 0 IO-APIC-edge libata
> >
> > So there's certainly IRQ's available. No idea why it doesn't choose one. But
> > since it never chose one, it never gets into the "wait for the IRQ" protected
> > by 'if (chip->vendor.irq)' at the end of tpm_tis_send.
> >
> > With DEBUG_SHIRQ=y, It starts at IRQ3, and assigns it (which seems a good thing).
> > Unfortunately, this then hits the timeouts in tpm_tis_send.
> >
> > Anybody got an idea what *should* be happening here?
>
> I don't know why tpm_tis_init() is messing around trying different
> IRQs between 3 and 16. That looks suspiciously x86-dependent.
>
> Maybe if you don't have PNP (though I doubt TPMs exist on any
> pre-PNPBIOS machines) the "check-IRQ" loop would be necessary.
>
> But you're using the PNP probe, and PNP should just tell you what
> IRQ the device is configured for (and whether the IRQ can be
> shared -- see 8250_pnp.c for an example).
I think tpm_tis should do something like the patch below to discover
its interrupt. If ACPI tells us the device's IRQ, we should just use
it rather than blindly trying a few possibilities. So the patch below
might make it work, because it should skip the problematic code you
identified above.
But there could still be an issue with DEBUG_SHIRQ and the IRQ probe
loop. Even if we used the attached patch, we'd probably still want
the IRQ probe to work when you specify tpm_tis.force=1.
Index: w/drivers/char/tpm/tpm_tis.c
===================================================================
--- w.orig/drivers/char/tpm/tpm_tis.c 2007-07-30 11:29:31.000000000 -0600
+++ w/drivers/char/tpm/tpm_tis.c 2007-07-30 11:35:20.000000000 -0600
@@ -433,17 +433,12 @@
MODULE_PARM_DESC(interrupts, "Enable interrupts");
static int tpm_tis_init(struct device *dev, resource_size_t start,
- resource_size_t len)
+ resource_size_t len, unsigned int irq)
{
u32 vendor, intfcaps, intmask;
int rc, i;
struct tpm_chip *chip;
- if (!start)
- start = TIS_MEM_BASE;
- if (!len)
- len = TIS_MEM_LEN;
-
if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
return -ENODEV;
@@ -510,7 +505,9 @@
iowrite32(intmask,
chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
- if (interrupts) {
+ if (interrupts)
+ chip->vendor.irq = irq;
+ if (interrupts && !chip->vendor.irq) {
chip->vendor.irq =
ioread8(chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
@@ -595,10 +592,13 @@
const struct pnp_device_id *pnp_id)
{
resource_size_t start, len;
+ unsigned int irq;
+
start = pnp_mem_start(pnp_dev, 0);
len = pnp_mem_len(pnp_dev, 0);
+ irq = pnp_irq(pnp_dev, 0);
- return tpm_tis_init(&pnp_dev->dev, start, len);
+ return tpm_tis_init(&pnp_dev->dev, start, len, irq);
}
static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
@@ -658,7 +658,7 @@
return rc;
if (IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0)))
return PTR_ERR(pdev);
- if((rc=tpm_tis_init(&pdev->dev, 0, 0)) != 0) {
+ if((rc=tpm_tis_init(&pdev->dev, TIS_MEM_BASE, TIS_MEM_LEN, 0)) != 0) {
platform_device_unregister(pdev);
driver_unregister(&tis_drv);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists