| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 31 Jul 2007 14:12:46 +0200 From: Pavel Machek <pavel@....cz> To: kernel list <linux-kernel@...r.kernel.org>, "Rafael J. Wysocki" <rjw@...k.pl>, suspend-devel@...ts.sourceforge.net, seife@...e.de Subject: [rft] Kill junk from s2ram resume paths Hi! This removes some stale debugging infrastructure from s2ram paths. Also, there's no need to verify_cpu on x86-64 -- cpu can't change during s2ram, and removed #if 0-ed code. Some testing would be useful, perpahs it will even fix someone's machine :-). (VGA accesses could theoretically hurt if vga is not present / if it is in some strange state). Signed-off-by: Pavel Machek <pavel@...e.cz> diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index 1415da1..9719bd6 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -53,9 +38,6 @@ wakeup_code: # Uncomment this to make your computer start producing ugly noise as soon # as BIOS returns to this real-mode entry point. # BEEP - movw $0xb800, %ax - movw %ax,%fs - movw $0x0e00 + 'L', %fs:(0x10) cli cld @@ -70,7 +52,6 @@ # BEEP BEEP 1: mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board - movw $0x0e00 + 'S', %fs:(0x12) pushl $0 # Kill any dangerous flags popfl @@ -108,9 +89,6 @@ # BEEP # make sure %cr4 is set correctly (features, etc) movl real_save_cr4 - wakeup_code, %eax movl %eax, %cr4 - movw $0xb800, %ax - movw %ax,%fs - movw $0x0e00 + 'i', %fs:(0x12) # need a gdt -- use lgdtl to force 32-bit operands, in case # the GDT is located past 16 megabytes. @@ -120,8 +98,6 @@ # BEEP movl %eax, %cr0 jmp 1f 1: - movw $0x0e00 + 'n', %fs:(0x14) - movl real_magic - wakeup_code, %eax cmpl $0x12345678, %eax jne bogus_real_magic @@ -145,7 +121,6 @@ real_save_efer_edx: .long 0 real_save_efer_eax: .long 0 bogus_real_magic: - movw $0x0e00 + 'B', %fs:(0x12) jmp bogus_real_magic /* This code uses an extended set of video mode numbers. These include: @@ -170,29 +145,9 @@ #define VIDEO_FIRST_V7 0x0900 # Setting of user mode (AX=mode ID) => CF=success mode_set: movw %ax, %bx -#if 0 - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 -#endif cmpb $VIDEO_FIRST_VESA>>8, %ah jnc check_vesa -#if 0 - orb %ah, %ah - jz setmenu -#endif decb %ah # jz setbios Add bios modes later @@ -232,7 +187,6 @@ wakeup_pmode_return: movw %ax, %es movw %ax, %fs movw %ax, %gs - movw $0x0e00 + 'u', 0xb8016 # reload the gdt, as we need the full 32 bit address lgdt saved_gdt diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S index 13f1480..bc9af5d 100644 --- a/arch/x86_64/kernel/acpi/wakeup.S +++ b/arch/x86_64/kernel/acpi/wakeup.S @@ -41,7 +41,6 @@ wakeup_code: # Running in *copy* of this code, somewhere in low 1MB. - movb $0xa1, %al ; outb %al, $0x80 cli cld # setup data segment @@ -65,11 +64,6 @@ # Running in *copy* of this code, somewh cmpl $0x12345678, %eax jne bogus_real_magic - call verify_cpu # Verify the cpu supports long - # mode - testl %eax, %eax - jnz no_longmode - testl $1, realmode_flags - wakeup_code jz 1f lcall $0xc000,$3 @@ -88,8 +82,6 @@ # Running in *copy* of this code, somewh movw %ax,%fs movw $0x0e00 + 'L', %fs:(0x10) - movb $0xa2, %al ; outb %al, $0x80 - mov %ds, %ax # Find 32bit wakeup_code addr movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) shll $4, %esi @@ -117,14 +109,10 @@ wakeup_32_vector: .code32 wakeup_32: # Running in this code, but at low address; paging is not yet turned on. - movb $0xa5, %al ; outb %al, $0x80 movl $__KERNEL_DS, %eax movl %eax, %ds - movw $0x0e00 + 'i', %ds:(0xb8012) - movb $0xa8, %al ; outb %al, $0x80; - /* * Prepare for entering 64bits mode */ @@ -200,16 +188,11 @@ wakeup_long64: */ lgdt cpu_gdt_descr - movw $0x0e00 + 'n', %ds:(0xb8014) - movb $0xa9, %al ; outb %al, $0x80 - movq saved_magic, %rax movq $0x123456789abcdef0, %rdx cmpq %rdx, %rax jne bogus_64_magic - movw $0x0e00 + 'u', %ds:(0xb8016) - nop nop movw $__KERNEL_DS, %ax @@ -256,20 +239,12 @@ realmode_flags: .quad 0 .code16 bogus_real_magic: - movb $0xba,%al ; outb %al,$0x80 jmp bogus_real_magic .code64 bogus_64_magic: - movb $0xb3,%al ; outb %al,$0x80 jmp bogus_64_magic -.code16 -no_longmode: - movb $0xbc,%al ; outb %al,$0x80 - jmp no_longmode - -#include "../verify_cpu.S" /* This code uses an extended set of video mode numbers. These include: * Aliases for standard modes @@ -294,29 +269,9 @@ # Setting of user mode (AX=mode ID) => C .code16 mode_seta: movw %ax, %bx -#if 0 - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 -#endif cmpb $VIDEO_FIRST_VESA>>8, %ah jnc check_vesaa -#if 0 - orb %ah, %ah - jz setmenu -#endif decb %ah # jz setbios Add bios modes later -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists